public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: devicetree@vger.kernel.org, linux-sunxi@lists.linux.dev,
	linux-kernel@vger.kernel.org,
	Martin Botka <martin.botka@somainline.org>,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH v2 4/5] mfd: axp20x: Add support for AXP323
Date: Mon,  7 Oct 2024 01:14:07 +0100	[thread overview]
Message-ID: <20241007001408.27249-5-andre.przywara@arm.com> (raw)
In-Reply-To: <20241007001408.27249-1-andre.przywara@arm.com>

The X-Powers AXP323 is a very close sibling of the AXP313A. The only
difference seems to be the ability to dual-phase the first two DC/DC
converter, which adds another register.

Add the required boilerplate to introduce a new PMIC to the AXP MFD
driver. Where possible, this just maps into the existing structs defined
for the AXP313A, only deviating where needed.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/mfd/axp20x-i2c.c   |  1 +
 drivers/mfd/axp20x.c       | 26 ++++++++++++++++++++++++++
 include/linux/mfd/axp20x.h |  2 ++
 3 files changed, 29 insertions(+)

diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
index 791a0b4cb64bb..5c93136f977e7 100644
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -65,6 +65,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
 	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
 	{ .compatible = "x-powers,axp313a", .data = (void *)AXP313A_ID },
+	{ .compatible = "x-powers,axp323", .data = (void *)AXP323_ID },
 	{ .compatible = "x-powers,axp717", .data = (void *)AXP717_ID },
 	{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
 	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index bc08ae4332604..251465a656d09 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -42,6 +42,7 @@ static const char * const axp20x_model_names[] = {
 	[AXP223_ID] = "AXP223",
 	[AXP288_ID] = "AXP288",
 	[AXP313A_ID] = "AXP313a",
+	[AXP323_ID] = "AXP323",
 	[AXP717_ID] = "AXP717",
 	[AXP803_ID] = "AXP803",
 	[AXP806_ID] = "AXP806",
@@ -193,6 +194,10 @@ static const struct regmap_range axp313a_writeable_ranges[] = {
 	regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
 };
 
+static const struct regmap_range axp323_writeable_ranges[] = {
+	regmap_reg_range(AXP313A_ON_INDICATE, AXP323_DCDC_MODE_CTRL2),
+};
+
 static const struct regmap_range axp313a_volatile_ranges[] = {
 	regmap_reg_range(AXP313A_SHUTDOWN_CTRL, AXP313A_SHUTDOWN_CTRL),
 	regmap_reg_range(AXP313A_IRQ_STATE, AXP313A_IRQ_STATE),
@@ -203,6 +208,11 @@ static const struct regmap_access_table axp313a_writeable_table = {
 	.n_yes_ranges = ARRAY_SIZE(axp313a_writeable_ranges),
 };
 
+static const struct regmap_access_table axp323_writeable_table = {
+	.yes_ranges = axp323_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(axp323_writeable_ranges),
+};
+
 static const struct regmap_access_table axp313a_volatile_table = {
 	.yes_ranges = axp313a_volatile_ranges,
 	.n_yes_ranges = ARRAY_SIZE(axp313a_volatile_ranges),
@@ -433,6 +443,15 @@ static const struct regmap_config axp313a_regmap_config = {
 	.cache_type = REGCACHE_MAPLE,
 };
 
+static const struct regmap_config axp323_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.wr_table = &axp323_writeable_table,
+	.volatile_table = &axp313a_volatile_table,
+	.max_register = AXP323_DCDC_MODE_CTRL2,
+	.cache_type = REGCACHE_MAPLE,
+};
+
 static const struct regmap_config axp717_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -1221,6 +1240,7 @@ static int axp20x_power_off(struct sys_off_data *data)
 	unsigned int shutdown_reg;
 
 	switch (axp20x->variant) {
+	case AXP323_ID:
 	case AXP313A_ID:
 		shutdown_reg = AXP313A_SHUTDOWN_CTRL;
 		break;
@@ -1289,6 +1309,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
 		axp20x->regmap_cfg = &axp313a_regmap_config;
 		axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
 		break;
+	case AXP323_ID:
+		axp20x->nr_cells = ARRAY_SIZE(axp313a_cells);
+		axp20x->cells = axp313a_cells;
+		axp20x->regmap_cfg = &axp323_regmap_config;
+		axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
+		break;
 	case AXP717_ID:
 		axp20x->nr_cells = ARRAY_SIZE(axp717_cells);
 		axp20x->cells = axp717_cells;
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 79ecaaaa20703..c3df0e615fbf4 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -19,6 +19,7 @@ enum axp20x_variants {
 	AXP223_ID,
 	AXP288_ID,
 	AXP313A_ID,
+	AXP323_ID,
 	AXP717_ID,
 	AXP803_ID,
 	AXP806_ID,
@@ -113,6 +114,7 @@ enum axp20x_variants {
 #define AXP313A_SHUTDOWN_CTRL		0x1a
 #define AXP313A_IRQ_EN			0x20
 #define AXP313A_IRQ_STATE		0x21
+#define AXP323_DCDC_MODE_CTRL2		0x22
 
 #define AXP717_ON_INDICATE		0x00
 #define AXP717_PMU_STATUS_2		0x01
-- 
2.46.2


  parent reply	other threads:[~2024-10-07  0:14 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-07  0:14 [PATCH v2 0/5] regulator: add X-Powers AXP323 support Andre Przywara
2024-10-07  0:14 ` [PATCH v2 1/5] dt-bindings: mfd: x-powers,axp152: Document AXP323 Andre Przywara
2024-10-07  0:14 ` [PATCH v2 2/5] mfd: axp20x: ensure relationship between IDs and model names Andre Przywara
2024-10-07  0:14 ` [PATCH v2 3/5] mfd: axp20x: Allow multiple regulators Andre Przywara
2024-12-07 17:45   ` Chris Morgan
2024-12-27 22:34     ` Vasily Khoruzhick
2025-01-06 19:50       ` Andrey Skvortsov
2024-10-07  0:14 ` Andre Przywara [this message]
2024-10-07  0:14 ` [PATCH v2 5/5] regulator: axp20x: add support for the AXP323 Andre Przywara
2024-10-15 10:23   ` Lee Jones
2024-10-18 19:18     ` Mark Brown
2024-10-31 15:51 ` [PATCH v2 0/5] regulator: add X-Powers AXP323 support Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241007001408.27249-5-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=macromorgan@hotmail.com \
    --cc=martin.botka@somainline.org \
    --cc=robh@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox