From: Aradhya Bhatia <aradhya.bhatia@linux.dev>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>, Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>
Cc: Dominik Haller <d.haller@phytec.de>,
Sam Ravnborg <sam@ravnborg.org>,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Devarsh Thakkar <devarsht@ti.com>,
Praneeth Bajjuri <praneeth@ti.com>, Udit Kumar <u-kumar1@ti.com>,
Jayesh Choudhary <j-choudhary@ti.com>,
DRI Development List <dri-devel@lists.freedesktop.org>,
Linux Kernel List <linux-kernel@vger.kernel.org>,
Aradhya Bhatia <aradhya.bhatia@linux.dev>
Subject: [PATCH v5 13/13] drm/bridge: cdns-dsi: Use pre_enable/post_disable to enable/disable
Date: Sun, 20 Oct 2024 01:35:30 +0530 [thread overview]
Message-ID: <20241019200530.270738-6-aradhya.bhatia@linux.dev> (raw)
In-Reply-To: <20241019200530.270738-1-aradhya.bhatia@linux.dev>
From: Aradhya Bhatia <a-bhatia1@ti.com>
The cdns-dsi controller requires that it be turned on completely before
the input DPI's source has begun streaming[0]. Not having that, allows
for a small window before cdns-dsi enable and after cdns-dsi disable
where the previous entity (in this case tidss's videoport) to continue
streaming DPI video signals. This small window where cdns-dsi is
disabled but is still receiving signals causes the input FIFO of
cdns-dsi to get corrupted. This causes the colors to shift on the output
display. The colors can either shift by one color component (R->G, G->B,
B->R), or by two color components (R->B, G->R, B->G).
Since tidss's videoport starts streaming via crtc enable hooks, we need
cdns-dsi to be up and running before that. Now that the bridges are
pre_enabled before crtc is enabled, and post_disabled after crtc is
disabled, use the pre_enable and post_disable hooks to get cdns-dsi
ready and running before the tidss videoport to get pass the color shift
issues.
[0]: See section 12.6.5.7.3 "Start-up Procedure" in J721E SoC TRM
TRM Link: http://www.ti.com/lit/pdf/spruil1
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
---
.../gpu/drm/bridge/cadence/cdns-dsi-core.c | 62 ++++++++++---------
1 file changed, 34 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
index 79d8c2264c14..dfeb53841ebc 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
@@ -658,13 +658,28 @@ cdns_dsi_bridge_mode_valid(struct drm_bridge *bridge,
return MODE_OK;
}
-static void cdns_dsi_bridge_atomic_disable(struct drm_bridge *bridge,
- struct drm_bridge_state *old_bridge_state)
+static void cdns_dsi_bridge_atomic_post_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
{
struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge);
struct cdns_dsi *dsi = input_to_dsi(input);
u32 val;
+ /*
+ * The cdns-dsi controller needs to be disabled after it's DPI source
+ * has stopped streaming. If this is not followed, there is a brief
+ * window before DPI source is disabled and after cdns-dsi controller
+ * has been disabled where the DPI stream is still on, but the cdns-dsi
+ * controller is not ready anymore to accept the incoming signals. This
+ * is one of the reasons why a shift in pixel colors is observed on
+ * displays that have cdns-dsi as one of the bridges.
+ *
+ * To mitigate this, disable this bridge from the bridge post_disable()
+ * hook, instead of the bridge _disable() hook. The bridge post_disable()
+ * hook gets called after the CRTC disable, where often many DPI sources
+ * disable their streams.
+ */
+
val = readl(dsi->regs + MCTL_MAIN_DATA_CTL);
val &= ~(IF_VID_SELECT_MASK | IF_VID_MODE | VID_EN | HOST_EOT_GEN |
DISP_EOT_GEN);
@@ -683,15 +698,6 @@ static void cdns_dsi_bridge_atomic_disable(struct drm_bridge *bridge,
pm_runtime_put(dsi->base.dev);
}
-static void cdns_dsi_bridge_atomic_post_disable(struct drm_bridge *bridge,
- struct drm_bridge_state *old_bridge_state)
-{
- struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge);
- struct cdns_dsi *dsi = input_to_dsi(input);
-
- pm_runtime_put(dsi->base.dev);
-}
-
static void cdns_dsi_hs_init(struct cdns_dsi *dsi)
{
struct cdns_dsi_output *output = &dsi->output;
@@ -760,8 +766,8 @@ static void cdns_dsi_init_link(struct cdns_dsi *dsi)
dsi->link_initialized = true;
}
-static void cdns_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
- struct drm_bridge_state *old_bridge_state)
+static void cdns_dsi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
{
struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge);
struct cdns_dsi *dsi = input_to_dsi(input);
@@ -776,6 +782,21 @@ static void cdns_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0))
return;
+ /*
+ * The cdns-dsi controller needs to be enabled before it's DPI source
+ * has begun streaming. If this is not followed, there is a brief window
+ * after DPI source enable and before cdns-dsi controller enable where
+ * the DPI stream is on, but the cdns-dsi controller is not ready to
+ * accept the incoming signals. This is one of the reasons why a shift
+ * in pixel colors is observed on displays that have cdns-dsi as one of
+ * the bridges.
+ *
+ * To mitigate this, enable this bridge from the bridge pre_enable()
+ * hook, instead of the bridge _enable() hook. The bridge pre_enable()
+ * hook gets called before the CRTC enable, where often many DPI sources
+ * enable their streams.
+ */
+
if (dsi->platform_ops && dsi->platform_ops->enable)
dsi->platform_ops->enable(dsi);
@@ -912,19 +933,6 @@ static void cdns_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
writel(tmp, dsi->regs + MCTL_MAIN_EN);
}
-static void cdns_dsi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
- struct drm_bridge_state *old_bridge_state)
-{
- struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge);
- struct cdns_dsi *dsi = input_to_dsi(input);
-
- if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0))
- return;
-
- cdns_dsi_init_link(dsi);
- cdns_dsi_hs_init(dsi);
-}
-
static u32 *cdns_dsi_bridge_get_input_bus_fmts(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
@@ -968,9 +976,7 @@ static int cdns_dsi_bridge_atomic_check(struct drm_bridge *bridge,
static const struct drm_bridge_funcs cdns_dsi_bridge_funcs = {
.attach = cdns_dsi_bridge_attach,
.mode_valid = cdns_dsi_bridge_mode_valid,
- .atomic_disable = cdns_dsi_bridge_atomic_disable,
.atomic_pre_enable = cdns_dsi_bridge_atomic_pre_enable,
- .atomic_enable = cdns_dsi_bridge_atomic_enable,
.atomic_post_disable = cdns_dsi_bridge_atomic_post_disable,
.atomic_check = cdns_dsi_bridge_atomic_check,
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
--
2.34.1
next prev parent reply other threads:[~2024-10-19 20:06 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-19 19:53 [PATCH v5 00/13] drm/bridge: cdns-dsi: Fix the color-shift issue Aradhya Bhatia
2024-10-19 19:53 ` [PATCH v5 01/13] drm/bridge: cdns-dsi: Fix connecting to next bridge Aradhya Bhatia
2024-10-19 19:54 ` [PATCH v5 02/13] drm/bridge: cdns-dsi: Move to devm_drm_of_get_bridge() Aradhya Bhatia
2024-10-20 10:49 ` Dmitry Baryshkov
2024-10-19 19:54 ` [PATCH v5 03/13] drm/bridge: cdns-dsi: Fix Phy _init() and _exit() Aradhya Bhatia
2024-10-20 11:34 ` Dmitry Baryshkov
2024-10-19 19:54 ` [PATCH v5 04/13] drm/bridge: cdns-dsi: Fix the link and phy init order Aradhya Bhatia
2024-10-19 19:54 ` [PATCH v5 05/13] drm/bridge: cdns-dsi: Fix the clock variable for mode_valid() Aradhya Bhatia
2024-10-19 19:54 ` [PATCH v5 06/13] drm/bridge: cdns-dsi: Check return value when getting default PHY config Aradhya Bhatia
2024-11-18 14:12 ` Tomi Valkeinen
2024-10-19 19:54 ` [PATCH v5 07/13] drm/bridge: cdns-dsi: Wait for Clk and Data Lanes to be ready Aradhya Bhatia
2024-10-22 6:25 ` Devarsh Thakkar
2024-10-22 17:25 ` Aradhya Bhatia
2024-10-19 20:05 ` [PATCH v5 08/13] drm/mipi-dsi: Add helper to find input format Aradhya Bhatia
2024-10-19 20:05 ` [PATCH v5 09/13] drm/bridge: cdns-dsi: Support atomic bridge APIs Aradhya Bhatia
2024-10-19 20:05 ` [PATCH v5 10/13] drm/bridge: cdns-dsi: Move DSI mode check to _atomic_check() Aradhya Bhatia
2024-10-20 11:42 ` Dmitry Baryshkov
2024-10-19 20:05 ` [PATCH v5 11/13] drm/atomic-helper: Separate out Encoder-Bridge enable and disable Aradhya Bhatia
2024-10-20 11:47 ` Dmitry Baryshkov
2024-10-19 20:05 ` [PATCH v5 12/13] drm/atomic-helper: Re-order bridge chain pre-enable and post-disable Aradhya Bhatia
2024-10-20 11:58 ` Dmitry Baryshkov
2024-10-19 20:05 ` Aradhya Bhatia [this message]
2024-10-20 11:57 ` [PATCH v5 13/13] drm/bridge: cdns-dsi: Use pre_enable/post_disable to enable/disable Dmitry Baryshkov
2024-10-21 17:07 ` Aradhya Bhatia
2024-10-21 18:39 ` Dmitry Baryshkov
2024-10-22 17:19 ` Aradhya Bhatia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241019200530.270738-6-aradhya.bhatia@linux.dev \
--to=aradhya.bhatia@linux.dev \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=d.haller@phytec.de \
--cc=devarsht@ti.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=j-choudhary@ti.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=nm@ti.com \
--cc=praneeth@ti.com \
--cc=rfoss@kernel.org \
--cc=sam@ravnborg.org \
--cc=simona@ffwll.ch \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=tzimmermann@suse.de \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox