[PATCH 1/2] clk: qcom: clk-alpha-pll: drop lucid-evo pll enabled warning

[Johan Hovold <johan+linaro@kernel.org>]

The boot firmware may have left the display enabled and its PLL running,
which currently generates a warning on boot (e.g. on x1e80100):

	disp_cc_pll0 PLL is already enabled

Drop the bogus warning and fix up the PLL enabled error handling
(trion_pll_is_enabled() only returns 0 or 1).

Fixes: d1b121d62b7e ("clk: qcom: Add LUCID_EVO PLL type for SDX65")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index f9105443d7db..99d6962d25bb 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -2318,13 +2318,8 @@ static int alpha_pll_lucid_evo_enable(struct clk_hw *hw)
 	}
 
 	/* Check if PLL is already enabled */
-	ret = trion_pll_is_enabled(pll, regmap);
-	if (ret < 0) {
-		return ret;
-	} else if (ret) {
-		pr_warn("%s PLL is already enabled\n", clk_hw_get_name(&pll->clkr.hw));
+	if (trion_pll_is_enabled(pll, regmap))
 		return 0;
-	}
 
 	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
 	if (ret)
-- 
2.45.2