[PATCH v3 3/4] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()

Frank Li
2024-10-21T20:08:02Z

Fix hardcoding to Root Complex (RC) mode by adding a drvdata mode check.
Pass PHY_MODE_PCIE_EP if the PCI controller operates in Endpoint (EP) mode.

Fixes: 8026f2d8e8a9 ("PCI: imx6: Call common PHY API to set mode, speed, and submode")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 808d1f1054173..bdc2b372e6c13 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -961,7 +961,9 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
goto err_clk_disable;
}

- ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+ ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE,
+ imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE ?
+ PHY_MODE_PCIE_EP : PHY_MODE_PCIE_RC);
if (ret) {
dev_err(dev, "unable to set PCIe PHY mode\n");
goto err_phy_exit;

--
2.34.1