From: Markuss Broks <markuss.broks@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>,
Tomasz Figa <tomasz.figa@gmail.com>,
Will Deacon <will@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>,
Markuss Broks <markuss.broks@gmail.com>,
Maksym Holovach <nergzd@nergzd723.xyz>
Subject: [PATCH 12/12] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
Date: Thu, 24 Oct 2024 01:36:43 +0300 [thread overview]
Message-ID: <20241024-exynos9810-v1-12-ed14d0d60d08@gmail.com> (raw)
In-Reply-To: <20241024-exynos9810-v1-0-ed14d0d60d08@gmail.com>
Samsung Galaxy S9 (SM-G960F), codenamed starlte, is a mobile phone
released in 2017. It has 4GB of RAM, 64GB of UFS storage, Exynos9810
SoC and 1440x2960 Super AMOLED display.
This initial device tree enables the framebuffer pre-initialised
by bootloader and physical buttons of the device, with more support
to come in the future.
Co-authored-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
arch/arm64/boot/dts/exynos/Makefile | 1 +
arch/arm64/boot/dts/exynos/exynos9810-starlte.dts | 119 ++++++++++++++++++++++
2 files changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 7a934499b235892eef38cd926905e02f0ce08278..6760b3d59e819fb52bc8cf4dc6877a0b9db9ce47 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
exynos7885-jackpotlte.dtb \
exynos850-e850-96.dtb \
exynos8895-dreamlte.dtb \
+ exynos9810-starlte.dtb \
exynos990-c1s.dtb \
exynosautov9-sadk.dtb \
exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
new file mode 100644
index 0000000000000000000000000000000000000000..f3a1910402b8d686dd7bd156a691ec541e10ad08
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S9 (starlte/SM-G960F) device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+/dts-v1/;
+#include "exynos9810.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Samsung Galaxy S9 (SM-G960F)";
+ compatible = "samsung,starlte", "samsung,exynos9810";
+ chassis-type = "handset";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@cc000000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+ width = <1440>;
+ height = <2960>;
+ stride = <(1440 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x3c800000>,
+ <0x8 0x80000000 0x80000000>,
+ <0x0 0xc0000000 0x20000000>,
+ <0x0 0xe1900000 0x1e700000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@cc000000 {
+ reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+ no-map;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_voldown &key_volup &key_bixby &key_power>;
+ pinctrl-names = "default";
+
+ /* In stock firmware used for assistant. Map it as a camera button for now */
+ bixby-key {
+ label = "Bixby";
+ linux,code = <KEY_CAMERA>;
+ gpios = <&gpa0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ power-key {
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ volup-key {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+ };
+
+ voldown-key {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&oscclk {
+ clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+ key_bixby: key-bixby-pins {
+ samsung,pins = "gpa0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ key_volup: key-volup-pins {
+ samsung,pins = "gpa0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ key_voldown: key-voldown-pins {
+ samsung,pins = "gpa0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ key_power: key-power-pins {
+ samsung,pins = "gpa2-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+};
--
2.46.2
next prev parent reply other threads:[~2024-10-23 22:37 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-23 22:36 [PATCH 00/12] Add support for Exynos9810 SoC and Samsung Galaxy S9 (SM-G960F) Markuss Broks
2024-10-23 22:36 ` [PATCH 01/12] dt-bindings: arm: cpus: Add Samsung Mongoose M3 Markuss Broks
2024-10-24 10:09 ` Krzysztof Kozlowski
2024-10-23 22:36 ` [PATCH 02/12] dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible Markuss Broks
2024-10-23 22:36 ` [PATCH 03/12] dt-bindings: pinctrl: samsung: Add compatible for Exynos9810 SoC Markuss Broks
2024-10-23 22:36 ` [PATCH 04/12] dt-bindings: pinctrl: samsung: Add compatible for exynos9810-wakeup-eint Markuss Broks
2024-10-23 22:36 ` [PATCH 05/12] dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible Markuss Broks
2024-10-23 22:36 ` [PATCH 06/12] dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding Markuss Broks
2024-10-23 22:36 ` [PATCH 07/12] dt-bindings: arm: pmu: Add Samsung Mongoose core compatible Markuss Broks
2024-10-23 22:36 ` [PATCH 08/12] perf: arm_pmuv3: Add support for Samsung Mongoose PMU Markuss Broks
2024-10-23 22:36 ` [PATCH 09/12] soc: samsung: exynos-chipid: Add support for Exynos9810 SoC Markuss Broks
2024-10-23 22:36 ` [PATCH 10/12] pinctrl: samsung: Add Exynos9810 SoC specific data Markuss Broks
2024-10-23 22:36 ` [PATCH 11/12] arm64: dts: exynos: Add Exynos9810 SoC support Markuss Broks
2024-10-24 6:31 ` Ivaylo Ivanov
2024-10-24 10:15 ` Krzysztof Kozlowski
2024-10-23 22:36 ` Markuss Broks [this message]
2024-10-24 6:20 ` [PATCH 12/12] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F) Ivaylo Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241024-exynos9810-v1-12-ed14d0d60d08@gmail.com \
--to=markuss.broks@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ivo.ivanov.ivanov1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mark.rutland@arm.com \
--cc=nergzd@nergzd723.xyz \
--cc=robh@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=tomasz.figa@gmail.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).