From: Rosen Penev <rosenp@gmail.com>
To: netdev@vger.kernel.org
Cc: Ido Schimmel <idosch@nvidia.com>, Petr Machata <petrm@nvidia.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCHv2 net-next] net: mellanox: use ethtool string helpers
Date: Wed, 30 Oct 2024 13:58:24 -0700 [thread overview]
Message-ID: <20241030205824.9061-1-rosenp@gmail.com> (raw)
These are the preferred way to copy ethtool strings.
Avoids incrementing pointers all over the place.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
v2: rebase to make it apply.
.../mellanox/mlxsw/spectrum_ethtool.c | 83 +++++++------------
.../ethernet/mellanox/mlxsw/spectrum_ptp.c | 7 +-
2 files changed, 30 insertions(+), 60 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
index 2bed8c86b7cf..5189af0da1f4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
@@ -607,84 +607,57 @@ static void mlxsw_sp_port_get_prio_strings(u8 **p, int prio)
{
int i;
- for (i = 0; i < MLXSW_SP_PORT_HW_PRIO_STATS_LEN; i++) {
- snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
- mlxsw_sp_port_hw_prio_stats[i].str, prio);
- *p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < MLXSW_SP_PORT_HW_PRIO_STATS_LEN; i++)
+ ethtool_sprintf(p, "%.29s_%.1d",
+ mlxsw_sp_port_hw_prio_stats[i].str, prio);
}
static void mlxsw_sp_port_get_tc_strings(u8 **p, int tc)
{
int i;
- for (i = 0; i < MLXSW_SP_PORT_HW_TC_STATS_LEN; i++) {
- snprintf(*p, ETH_GSTRING_LEN, "%.28s_%d",
- mlxsw_sp_port_hw_tc_stats[i].str, tc);
- *p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < MLXSW_SP_PORT_HW_TC_STATS_LEN; i++)
+ ethtool_sprintf(p, "%.28s_%d", mlxsw_sp_port_hw_tc_stats[i].str,
+ tc);
}
static void mlxsw_sp_port_get_strings(struct net_device *dev,
u32 stringset, u8 *data)
{
struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
- u8 *p = data;
int i;
- switch (stringset) {
- case ETH_SS_STATS:
- for (i = 0; i < MLXSW_SP_PORT_HW_STATS_LEN; i++) {
- memcpy(p, mlxsw_sp_port_hw_stats[i].str,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
+ if (stringset != ETH_SS_STATS)
+ return;
- for (i = 0; i < MLXSW_SP_PORT_HW_RFC_2863_STATS_LEN; i++) {
- memcpy(p, mlxsw_sp_port_hw_rfc_2863_stats[i].str,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < MLXSW_SP_PORT_HW_STATS_LEN; i++)
+ ethtool_puts(&data, mlxsw_sp_port_hw_stats[i].str);
- for (i = 0; i < MLXSW_SP_PORT_HW_RFC_2819_STATS_LEN; i++) {
- memcpy(p, mlxsw_sp_port_hw_rfc_2819_stats[i].str,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < MLXSW_SP_PORT_HW_RFC_2863_STATS_LEN; i++)
+ ethtool_puts(&data, mlxsw_sp_port_hw_rfc_2863_stats[i].str);
- for (i = 0; i < MLXSW_SP_PORT_HW_RFC_3635_STATS_LEN; i++) {
- memcpy(p, mlxsw_sp_port_hw_rfc_3635_stats[i].str,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < MLXSW_SP_PORT_HW_RFC_2819_STATS_LEN; i++)
+ ethtool_puts(&data, mlxsw_sp_port_hw_rfc_2819_stats[i].str);
- for (i = 0; i < MLXSW_SP_PORT_HW_EXT_STATS_LEN; i++) {
- memcpy(p, mlxsw_sp_port_hw_ext_stats[i].str,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < MLXSW_SP_PORT_HW_RFC_3635_STATS_LEN; i++)
+ ethtool_puts(&data, mlxsw_sp_port_hw_rfc_3635_stats[i].str);
- for (i = 0; i < MLXSW_SP_PORT_HW_DISCARD_STATS_LEN; i++) {
- memcpy(p, mlxsw_sp_port_hw_discard_stats[i].str,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < MLXSW_SP_PORT_HW_EXT_STATS_LEN; i++)
+ ethtool_puts(&data, mlxsw_sp_port_hw_ext_stats[i].str);
- for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
- mlxsw_sp_port_get_prio_strings(&p, i);
+ for (i = 0; i < MLXSW_SP_PORT_HW_DISCARD_STATS_LEN; i++)
+ ethtool_puts(&data, mlxsw_sp_port_hw_discard_stats[i].str);
- for (i = 0; i < TC_MAX_QUEUE; i++)
- mlxsw_sp_port_get_tc_strings(&p, i);
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
+ mlxsw_sp_port_get_prio_strings(&data, i);
- mlxsw_sp_port->mlxsw_sp->ptp_ops->get_stats_strings(&p);
+ for (i = 0; i < TC_MAX_QUEUE; i++)
+ mlxsw_sp_port_get_tc_strings(&data, i);
- for (i = 0; i < MLXSW_SP_PORT_HW_TRANSCEIVER_STATS_LEN; i++) {
- memcpy(p, mlxsw_sp_port_transceiver_stats[i].str,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- break;
- }
+ mlxsw_sp_port->mlxsw_sp->ptp_ops->get_stats_strings(&data);
+
+ for (i = 0; i < MLXSW_SP_PORT_HW_TRANSCEIVER_STATS_LEN; i++)
+ ethtool_puts(&data, mlxsw_sp_port_transceiver_stats[i].str);
}
static int mlxsw_sp_port_set_phys_id(struct net_device *dev,
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
index 5b174cb95eb8..72e925558061 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
@@ -1326,11 +1326,8 @@ void mlxsw_sp1_get_stats_strings(u8 **p)
{
int i;
- for (i = 0; i < MLXSW_SP_PTP_PORT_STATS_LEN; i++) {
- memcpy(*p, mlxsw_sp_ptp_port_stats[i].str,
- ETH_GSTRING_LEN);
- *p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < MLXSW_SP_PTP_PORT_STATS_LEN; i++)
+ ethtool_puts(p, mlxsw_sp_ptp_port_stats[i].str);
}
void mlxsw_sp1_get_stats(struct mlxsw_sp_port *mlxsw_sp_port,
--
2.47.0
next reply other threads:[~2024-10-30 20:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-30 20:58 Rosen Penev [this message]
2024-10-30 23:52 ` [PATCHv2 net-next] net: mellanox: use ethtool string helpers Jakub Kicinski
2024-10-31 0:10 ` Rosen Penev
2024-10-31 8:16 ` Ido Schimmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241030205824.9061-1-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=idosch@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=petrm@nvidia.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox