[PATCH v2 0/2] Fix dtc warnings when building the LAN966x device tree overlay

[PATCH v2 0/2] Fix dtc warnings when building the LAN966x device tree overlay

[Herve Codina]

dtc generates 3 kinds of warnings when it builds the LAN966x dtso.

- missing or empty reg/ranges property
    .../pci-ep-bus@0/cpu_clk: missing or empty reg/ranges property
    .../pci-ep-bus@0/ddr_clk: missing or empty reg/ranges property
    .../pci-ep-bus@0/sys_clk: missing or empty reg/ranges property
  Patch 1 in this series fixes these warnings

- Missing interrupt-parent
   .../pci-ep-bus@0/oic@e00c0120: Missing interrupt-parent
  This warning was quickly silenced by Philipp [1].
  Patch 2 in this series fixes the warning and should replace the patch
  applied by Philipp to silence the warning.

- Warning (avoid_unnecessary_addr_size)
   /fragment@0/__overlay__: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property
  This warning should be fixed in dtc.
  A patch has already be sent by Philip to fix it [2].

[1] https://lore.kernel.org/all/57793bb01e02f03e215dfa6f8783df18034ae2ea.camel@pengutronix.de/
[2] https://lore.kernel.org/devicetree-compiler/20241025161307.3629901-1-p.zabel@pengutronix.de/T/#u

Compare to the previous iteration, this v2 series mainly renames clock
nodes.

Best regards,
Hervé

Changes v1 -> v2
  v1: https://lore.kernel.org/lkml/20241028122405.27090-1-herve.codina@bootlin.com/

  - Patch 1
    Rename clock nodes

  - Patch 2
    Add 'Reviewed-by: Rob Herring (Arm) <robh@kernel.org>'

Herve Codina (2):
  misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges
    property'
  misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'

 drivers/misc/lan966x_pci.dtso | 46 +++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 18 deletions(-)

-- 
2.46.2

[PATCH v2 1/2] misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'

[Herve Codina]

dtc generates the following warnings when building the LAN966x device
tree overlay (lan966x_pci.dtso):
  Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/cpu_clk: missing or empty reg/ranges property
  Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/ddr_clk: missing or empty reg/ranges property
  Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/sys_clk: missing or empty reg/ranges property

Indeed, related nodes are under the pci-ep-bus (simple-bus) which is not
correct.

Put them outside this node.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241025110919.64b1cffb@canb.auug.org.au/
Fixes: 185686beb464 ("misc: Add support for LAN966x PCI device")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
The referenced commit is in the reset tree
---
 drivers/misc/lan966x_pci.dtso | 36 +++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/misc/lan966x_pci.dtso b/drivers/misc/lan966x_pci.dtso
index 7282687df25f..e9b304c6ced3 100644
--- a/drivers/misc/lan966x_pci.dtso
+++ b/drivers/misc/lan966x_pci.dtso
@@ -19,6 +19,24 @@ __overlay__ {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
+			cpu_clk: clock-600000000 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <600000000>;  /* CPU clock = 600MHz */
+			};
+
+			ddr_clk: clock-30000000 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <30000000>;  /* Fabric clock = 30MHz */
+			};
+
+			sys_clk: clock-15625000 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <15625000>;  /* System clock = 15.625MHz */
+			};
+
 			pci-ep-bus@0 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
@@ -39,24 +57,6 @@ oic: oic@e00c0120 {
 					reg = <0xe00c0120 0x190>;
 				};
 
-				cpu_clk: cpu_clk {
-					compatible = "fixed-clock";
-					#clock-cells = <0>;
-					clock-frequency = <600000000>;  // CPU clock = 600MHz
-				};
-
-				ddr_clk: ddr_clk {
-					compatible = "fixed-clock";
-					#clock-cells = <0>;
-					clock-frequency = <30000000>;  // Fabric clock = 30MHz
-				};
-
-				sys_clk: sys_clk {
-					compatible = "fixed-clock";
-					#clock-cells = <0>;
-					clock-frequency = <15625000>;  // System clock = 15.625MHz
-				};
-
 				cpu_ctrl: syscon@e00c0000 {
 					compatible = "microchip,lan966x-cpu-syscon", "syscon";
 					reg = <0xe00c0000 0xa8>;
-- 
2.46.2

Re: [PATCH v2 1/2] misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'

[Rob Herring]

On Tue, Oct 29, 2024 at 3:43 AM Herve Codina <herve.codina@bootlin.com> wrote:
>
> dtc generates the following warnings when building the LAN966x device
> tree overlay (lan966x_pci.dtso):
>   Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/cpu_clk: missing or empty reg/ranges property
>   Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/ddr_clk: missing or empty reg/ranges property
>   Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/sys_clk: missing or empty reg/ranges property
>
> Indeed, related nodes are under the pci-ep-bus (simple-bus) which is not
> correct.
>
> Put them outside this node.
>
> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
> Closes: https://lore.kernel.org/all/20241025110919.64b1cffb@canb.auug.org.au/
> Fixes: 185686beb464 ("misc: Add support for LAN966x PCI device")
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
> The referenced commit is in the reset tree
> ---
>  drivers/misc/lan966x_pci.dtso | 36 +++++++++++++++++------------------
>  1 file changed, 18 insertions(+), 18 deletions(-)

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v2 2/2] misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'

[Herve Codina]

dtc generates the following warning when building the LAN966x devicetree
overlay (lan966x_pci.dtso):
  Warning (interrupts_property): /fragment@0/__overlay__/pci-ep-bus@0/oic@e00c0120: Missing interrupt-parent

The oic interrupt parent is the PCI device itself. The PCI device node
is the node on which the dtbo will be applied and this node already has
properties needed.

In order to remove the warning, add the missing properties in the
overlay fragment node. Properties in this node will not be added when
the overlay is applied (which is what we expect) but makes dtc happy.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241025110919.64b1cffb@canb.auug.org.au/
Fixes: 185686beb464 ("misc: Add support for LAN966x PCI device")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
The referenced commit is in the reset tree
---
 drivers/misc/lan966x_pci.dtso | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/misc/lan966x_pci.dtso b/drivers/misc/lan966x_pci.dtso
index e9b304c6ced3..7b196b0a0eb6 100644
--- a/drivers/misc/lan966x_pci.dtso
+++ b/drivers/misc/lan966x_pci.dtso
@@ -15,6 +15,16 @@
 / {
 	fragment@0 {
 		target-path = "";
+
+		/*
+		 * These properties allow to avoid a dtc warnings.
+		 * The real interrupt controller is the PCI device itself. It
+		 * is the node on which the device tree overlay will be applied.
+		 * This node has those properties.
+		 */
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
 		__overlay__ {
 			#address-cells = <3>;
 			#size-cells = <2>;
-- 
2.46.2

Re: [PATCH v2 0/2] Fix dtc warnings when building the LAN966x device tree overlay

[Herve Codina]

Hi Philipp,


On Tue, 29 Oct 2024 09:43:34 +0100
Herve Codina <herve.codina@bootlin.com> wrote:

> dtc generates 3 kinds of warnings when it builds the LAN966x dtso.
> 
> - missing or empty reg/ranges property
>     .../pci-ep-bus@0/cpu_clk: missing or empty reg/ranges property
>     .../pci-ep-bus@0/ddr_clk: missing or empty reg/ranges property
>     .../pci-ep-bus@0/sys_clk: missing or empty reg/ranges property
>   Patch 1 in this series fixes these warnings
> 
> - Missing interrupt-parent
>    .../pci-ep-bus@0/oic@e00c0120: Missing interrupt-parent
>   This warning was quickly silenced by Philipp [1].
>   Patch 2 in this series fixes the warning and should replace the patch
>   applied by Philipp to silence the warning.
> 
> - Warning (avoid_unnecessary_addr_size)
>    /fragment@0/__overlay__: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property
>   This warning should be fixed in dtc.
>   A patch has already be sent by Philip to fix it [2].
> 
> [1] https://lore.kernel.org/all/57793bb01e02f03e215dfa6f8783df18034ae2ea.camel@pengutronix.de/
> [2] https://lore.kernel.org/devicetree-compiler/20241025161307.3629901-1-p.zabel@pengutronix.de/T/#u
> 

Both patches in this series have been reviewed by Rob.

I think it is a green light to have them applied in the reset tree.
Your opinion?

Best regards,
Hervé

Re: [PATCH v2 0/2] Fix dtc warnings when building the LAN966x device tree overlay

[Philipp Zabel]

On Do, 2024-10-31 at 16:01 +0100, Herve Codina wrote:
> Hi Philipp,
> 
> 
> On Tue, 29 Oct 2024 09:43:34 +0100
> Herve Codina <herve.codina@bootlin.com> wrote:
> 
> > dtc generates 3 kinds of warnings when it builds the LAN966x dtso.
> > 
> > - missing or empty reg/ranges property
> >     .../pci-ep-bus@0/cpu_clk: missing or empty reg/ranges property
> >     .../pci-ep-bus@0/ddr_clk: missing or empty reg/ranges property
> >     .../pci-ep-bus@0/sys_clk: missing or empty reg/ranges property
> >   Patch 1 in this series fixes these warnings
> > 
> > - Missing interrupt-parent
> >    .../pci-ep-bus@0/oic@e00c0120: Missing interrupt-parent
> >   This warning was quickly silenced by Philipp [1].
> >   Patch 2 in this series fixes the warning and should replace the patch
> >   applied by Philipp to silence the warning.
> > 
> > - Warning (avoid_unnecessary_addr_size)
> >    /fragment@0/__overlay__: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property
> >   This warning should be fixed in dtc.
> >   A patch has already be sent by Philip to fix it [2].
> > 
> > [1] https://lore.kernel.org/all/57793bb01e02f03e215dfa6f8783df18034ae2ea.camel@pengutronix.de/
> > [2] https://lore.kernel.org/devicetree-compiler/20241025161307.3629901-1-p.zabel@pengutronix.de/T/#u
> > 
> 
> Both patches in this series have been reviewed by Rob.
> 
> I think it is a green light to have them applied in the reset tree.
> Your opinion?

Applied to reset/next, thanks!

[1/2] misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
      https://git.pengutronix.de/cgit/pza/linux/commit/?id=344ea0d36b8c
[2/2] misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
      https://git.pengutronix.de/cgit/pza/linux/commit/?id=cf3e10cc0e88

I've dropped the Makefile patch ("misc: Silence warning when building
the LAN966x device tree overlay").

regards
Philipp