From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: linux-amarula@amarulasolutions.com,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Abel Vesa <abelvesa@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Michael Turquette <mturquette@baylibre.com>,
Peng Fan <peng.fan@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org
Subject: [PATCH v3 2/8] clk: imx: pll14xx: support spread spectrum clock generation
Date: Wed, 6 Nov 2024 09:57:58 +0100 [thread overview]
Message-ID: <20241106090549.3684963-3-dario.binacchi@amarulasolutions.com> (raw)
In-Reply-To: <20241106090549.3684963-1-dario.binacchi@amarulasolutions.com>
This patch adds support for spread spectrum clock (SSC) generation for
the pll14xxx. The addition of the "imx_clk_hw_pll14xx_ssc" macro has
minimized the number of changes required to avoid compilation errors
following the addition of the SSC setup parameter to the
"imx_dev_clk_hw_pll14xx" macro used in the files clk-imx8m{m,n,p}.c.
The change to the clk-imx8mp-audiomix.c file prevents the patch from
causing a compilation error.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
(no changes since v1)
drivers/clk/imx/clk-imx8mp-audiomix.c | 2 +-
drivers/clk/imx/clk-pll14xx.c | 102 +++++++++++++++++++++++++-
drivers/clk/imx/clk.h | 24 +++++-
3 files changed, 124 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
index b2cb157703c5..bfcf2975c217 100644
--- a/drivers/clk/imx/clk-imx8mp-audiomix.c
+++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
@@ -365,7 +365,7 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_REF_SEL] = hw;
hw = imx_dev_clk_hw_pll14xx(dev, "sai_pll", "sai_pll_ref_sel",
- base + 0x400, &imx_1443x_pll);
+ base + 0x400, &imx_1443x_pll, NULL);
if (IS_ERR(hw)) {
ret = PTR_ERR(hw);
goto err_clk_register;
diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index d63564dbb12c..76014e243a57 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -20,6 +20,8 @@
#define GNRL_CTL 0x0
#define DIV_CTL0 0x4
#define DIV_CTL1 0x8
+#define SSCG_CTRL 0xc
+
#define LOCK_STATUS BIT(31)
#define LOCK_SEL_MASK BIT(29)
#define CLKE_MASK BIT(11)
@@ -31,6 +33,10 @@
#define KDIV_MASK GENMASK(15, 0)
#define KDIV_MIN SHRT_MIN
#define KDIV_MAX SHRT_MAX
+#define SSCG_ENABLE BIT(31)
+#define MFREQ_CTL_MASK GENMASK(19, 12)
+#define MRAT_CTL_MASK GENMASK(9, 4)
+#define SEL_PF_MASK GENMASK(1, 0)
#define LOCK_TIMEOUT_US 10000
@@ -40,6 +46,7 @@ struct clk_pll14xx {
enum imx_pll14xx_type type;
const struct imx_pll14xx_rate_table *rate_table;
int rate_count;
+ struct imx_pll14xx_ssc ssc;
};
#define to_clk_pll14xx(_hw) container_of(_hw, struct clk_pll14xx, hw)
@@ -347,6 +354,27 @@ static int clk_pll1416x_set_rate(struct clk_hw *hw, unsigned long drate,
return 0;
}
+static void clk_pll1443x_set_sscg(struct clk_hw *hw, unsigned long parent_rate,
+ unsigned int pdiv, unsigned int mdiv)
+{
+ struct clk_pll14xx *pll = to_clk_pll14xx(hw);
+ struct imx_pll14xx_ssc *ssc = &pll->ssc;
+ u32 sscg_ctrl = readl_relaxed(pll->base + SSCG_CTRL);
+
+ sscg_ctrl &=
+ ~(SSCG_ENABLE | MFREQ_CTL_MASK | MRAT_CTL_MASK | SEL_PF_MASK);
+ if (ssc->enable) {
+ u32 mfr = parent_rate / (ssc->mod_freq * pdiv * (1 << 5));
+ u32 mrr = (ssc->mod_rate * mdiv * (1 << 6)) / (100 * mfr);
+
+ sscg_ctrl |= SSCG_ENABLE | FIELD_PREP(MFREQ_CTL_MASK, mfr) |
+ FIELD_PREP(MRAT_CTL_MASK, mrr) |
+ FIELD_PREP(SEL_PF_MASK, ssc->mod_type);
+ }
+
+ writel_relaxed(sscg_ctrl, pll->base + SSCG_CTRL);
+}
+
static int clk_pll1443x_set_rate(struct clk_hw *hw, unsigned long drate,
unsigned long prate)
{
@@ -368,6 +396,9 @@ static int clk_pll1443x_set_rate(struct clk_hw *hw, unsigned long drate,
writel_relaxed(FIELD_PREP(KDIV_MASK, rate.kdiv),
pll->base + DIV_CTL1);
+ if (pll->ssc.enable)
+ clk_pll1443x_set_sscg(hw, prate, rate.pdiv, rate.mdiv);
+
return 0;
}
@@ -408,6 +439,9 @@ static int clk_pll1443x_set_rate(struct clk_hw *hw, unsigned long drate,
gnrl_ctl &= ~BYPASS_MASK;
writel_relaxed(gnrl_ctl, pll->base + GNRL_CTL);
+ if (pll->ssc.enable)
+ clk_pll1443x_set_sscg(hw, prate, rate.pdiv, rate.mdiv);
+
return 0;
}
@@ -487,7 +521,8 @@ static const struct clk_ops clk_pll1443x_ops = {
struct clk_hw *imx_dev_clk_hw_pll14xx(struct device *dev, const char *name,
const char *parent_name, void __iomem *base,
- const struct imx_pll14xx_clk *pll_clk)
+ const struct imx_pll14xx_clk *pll_clk,
+ const struct imx_pll14xx_ssc *ssc)
{
struct clk_pll14xx *pll;
struct clk_hw *hw;
@@ -525,6 +560,8 @@ struct clk_hw *imx_dev_clk_hw_pll14xx(struct device *dev, const char *name,
pll->type = pll_clk->type;
pll->rate_table = pll_clk->rate_table;
pll->rate_count = pll_clk->rate_count;
+ if (ssc)
+ memcpy(&pll->ssc, ssc, sizeof(pll->ssc));
val = readl_relaxed(pll->base + GNRL_CTL);
val &= ~BYPASS_MASK;
@@ -542,3 +579,66 @@ struct clk_hw *imx_dev_clk_hw_pll14xx(struct device *dev, const char *name,
return hw;
}
EXPORT_SYMBOL_GPL(imx_dev_clk_hw_pll14xx);
+
+static enum imx_pll14xx_ssc_mod_type clk_pll14xx_ssc_mode(const char *name,
+ enum imx_pll14xx_ssc_mod_type def)
+{
+ int i;
+ struct {
+ const char *name;
+ enum imx_pll14xx_ssc_mod_type id;
+ } mod_methods[] = {
+ { .name = "down-spread", .id = IMX_PLL14XX_SSC_DOWN_SPREAD },
+ { .name = "up-spread", .id = IMX_PLL14XX_SSC_UP_SPREAD },
+ { .name = "center-spread", .id = IMX_PLL14XX_SSC_CENTER_SPREAD }
+ };
+
+ for (i = 0; i < ARRAY_SIZE(mod_methods); i++) {
+ if (!strcmp(name, mod_methods[i].name))
+ return mod_methods[i].id;
+ }
+
+ return def;
+}
+
+void imx_clk_pll14xx_get_ssc_conf(struct device_node *np, int pll_id,
+ struct imx_pll14xx_ssc *ssc)
+{
+ int i, ret, offset, num_clks;
+ u32 clk_id, clk_cell_size;
+ const char *s;
+
+ if (!ssc)
+ return;
+
+ memset(ssc, 0, sizeof(*ssc));
+
+ num_clks = of_count_phandle_with_args(np, "fsl,ssc-clocks",
+ "#clock-cells");
+ if (num_clks <= 0)
+ return;
+
+ ret = of_property_read_u32(np, "#clock-cells", &clk_cell_size);
+ if (ret)
+ return;
+
+ for (i = 0; i < num_clks; i++) {
+ offset = i * clk_cell_size + 1;
+ of_property_read_u32_index(np, "fsl,ssc-clocks", offset,
+ &clk_id);
+ if (clk_id != pll_id)
+ continue;
+
+ of_property_read_u32_index(np, "fsl,ssc-modfreq-hz", i,
+ &ssc->mod_freq);
+ of_property_read_u32_index(np, "fsl,ssc-modrate-percent", i,
+ &ssc->mod_rate);
+ if (!of_property_read_string(np, "fsl,ssc-modmethod", &s))
+ ssc->mod_type = clk_pll14xx_ssc_mode(
+ s, IMX_PLL14XX_SSC_DOWN_SPREAD);
+
+ ssc->enable = true;
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(imx_clk_pll14xx_get_ssc_conf);
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index aa5202f284f3..8cbc75480569 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -62,6 +62,19 @@ struct imx_pll14xx_rate_table {
unsigned int kdiv;
};
+enum imx_pll14xx_ssc_mod_type {
+ IMX_PLL14XX_SSC_DOWN_SPREAD,
+ IMX_PLL14XX_SSC_UP_SPREAD,
+ IMX_PLL14XX_SSC_CENTER_SPREAD,
+};
+
+struct imx_pll14xx_ssc {
+ bool enable;
+ unsigned int mod_freq;
+ unsigned int mod_rate;
+ enum imx_pll14xx_ssc_mod_type mod_type;
+};
+
struct imx_pll14xx_clk {
enum imx_pll14xx_type type;
const struct imx_pll14xx_rate_table *rate_table;
@@ -222,11 +235,18 @@ extern struct imx_fracn_gppll_clk imx_fracn_gppll_integer;
__imx_clk_hw_divider(name, parent, reg, shift, width, flags)
#define imx_clk_hw_pll14xx(name, parent_name, base, pll_clk) \
- imx_dev_clk_hw_pll14xx(NULL, name, parent_name, base, pll_clk)
+ imx_dev_clk_hw_pll14xx(NULL, name, parent_name, base, pll_clk, NULL)
+
+#define imx_clk_hw_pll14xx_ssc(name, parent_name, base, pll_clk, ssc) \
+ imx_dev_clk_hw_pll14xx(NULL, name, parent_name, base, pll_clk, ssc)
struct clk_hw *imx_dev_clk_hw_pll14xx(struct device *dev, const char *name,
const char *parent_name, void __iomem *base,
- const struct imx_pll14xx_clk *pll_clk);
+ const struct imx_pll14xx_clk *pll_clk,
+ const struct imx_pll14xx_ssc *ssc);
+
+void imx_clk_pll14xx_get_ssc_conf(struct device_node *np, int pll_id,
+ struct imx_pll14xx_ssc *ssc);
struct clk_hw *imx_clk_hw_pllv1(enum imx_pllv1_type type, const char *name,
const char *parent, void __iomem *base);
--
2.43.0
next prev parent reply other threads:[~2024-11-06 9:06 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-06 8:57 [PATCH v3 0/8] Support spread spectrum clocking for i.MX8{M,N,P} PLLs Dario Binacchi
2024-11-06 8:57 ` [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: support spread spectrum clocking Dario Binacchi
2024-11-06 14:10 ` Krzysztof Kozlowski
2024-11-06 14:13 ` Krzysztof Kozlowski
2024-11-07 14:57 ` Dario Binacchi
2024-11-08 12:12 ` Krzysztof Kozlowski
2024-11-08 12:50 ` Peng Fan
2024-11-08 14:10 ` Krzysztof Kozlowski
2024-11-09 0:37 ` Peng Fan
2024-11-09 0:56 ` Adam Ford
2024-11-09 10:05 ` Krzysztof Kozlowski
2024-11-09 10:20 ` Krzysztof Kozlowski
2024-11-11 1:49 ` Peng Fan
2024-11-11 11:57 ` Dario Binacchi
2024-11-11 13:45 ` Dario Binacchi
2024-11-17 10:59 ` Peng Fan
2024-11-19 13:53 ` Krzysztof Kozlowski
2024-11-19 14:07 ` Krzysztof Kozlowski
2024-11-20 10:11 ` Peng Fan
2024-11-06 8:57 ` Dario Binacchi [this message]
2024-11-06 8:57 ` [PATCH v3 3/8] clk: imx: imx8mm: distinguish between ccm and anatop references Dario Binacchi
2024-11-06 8:58 ` [PATCH v3 4/8] clk: imx8mm: support spread spectrum clock generation Dario Binacchi
2024-11-06 8:58 ` [PATCH v3 5/8] clk: imx: imx8mn: distinguish between ccm and anatop references Dario Binacchi
2024-11-06 8:58 ` [PATCH v3 6/8] clk: imx8mn: support spread spectrum clock generation Dario Binacchi
2024-11-06 8:58 ` [PATCH v3 7/8] clk: imx8mp: don't lose the anatop device node Dario Binacchi
2024-11-06 8:58 ` [PATCH v3 8/8] clk: imx8mp: support spread spectrum clock generation Dario Binacchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241106090549.3684963-3-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=abelvesa@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox