* [PATCH v2] arm: dts: aspeed: Blueridge and Rainer: Add VRM presence GPIOs
@ 2024-11-15 22:27 Eddie James
2024-11-18 0:12 ` Andrew Jeffery
0 siblings, 1 reply; 2+ messages in thread
From: Eddie James @ 2024-11-15 22:27 UTC (permalink / raw)
To: linux-aspeed
Cc: andrew, joel, robh, krzk+dt, conor+dt, devicetree, linux-kernel,
Eddie James
Add GPIO line names to the GPIO expander to describe DCM and
VRM presence detection lines.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v1:
- Fix lines that were too long
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 5 +++--
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
index 5f9a46c2abb8..bc4c46235421 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -1232,8 +1232,9 @@ led-controller@60 {
#gpio-cells = <2>;
gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "power-config-full-load", "";
+ "", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+ "", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+ "power-config-full-load", "";
};
led-controller@61 {
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index a4aec3010456..638a2c1c7892 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -1280,8 +1280,9 @@ pca_pres3: pca9552@60 {
#gpio-cells = <2>;
gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "power-config-full-load", "";
+ "", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+ "", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+ "power-config-full-load", "";
};
pca_pres2: pca9552@61 {
--
2.43.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] arm: dts: aspeed: Blueridge and Rainer: Add VRM presence GPIOs
2024-11-15 22:27 [PATCH v2] arm: dts: aspeed: Blueridge and Rainer: Add VRM presence GPIOs Eddie James
@ 2024-11-18 0:12 ` Andrew Jeffery
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Jeffery @ 2024-11-18 0:12 UTC (permalink / raw)
To: linux-aspeed, Eddie James
Cc: joel, robh, krzk+dt, conor+dt, devicetree, linux-kernel
On Fri, 15 Nov 2024 16:27:21 -0600, Eddie James wrote:
> Add GPIO line names to the GPIO expander to describe DCM and
> VRM presence detection lines.
>
>
Thanks, I've applied this to be picked up through the BMC tree.
--
Andrew Jeffery <andrew@codeconstruct.com.au>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-11-18 0:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-11-15 22:27 [PATCH v2] arm: dts: aspeed: Blueridge and Rainer: Add VRM presence GPIOs Eddie James
2024-11-18 0:12 ` Andrew Jeffery
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox