[PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800

[Cedric Encarnacion <cedricjustine.encarnacion@analog.com>]

    ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature
    ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature
    LTP8800-1A/-2/-4A: 150A/135A/200A DC/DC µModule Regulator

The LTP8800 is a family of step-down μModule regulators that provides
microprocessor core voltage from 54V power distribution architecture.
LTP8800 features telemetry monitoring of input/output voltage, input
current, output power, and temperature over PMBus.

Co-developed-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
---
 Documentation/hwmon/adp1050.rst | 63 +++++++++++++++++++++++++++--
 drivers/hwmon/pmbus/Kconfig     |  9 +++++
 drivers/hwmon/pmbus/adp1050.c   | 72 +++++++++++++++++++++++++++++++--
 3 files changed, 137 insertions(+), 7 deletions(-)

diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
index 8fa937064886..1692373ee5af 100644
--- a/Documentation/hwmon/adp1050.rst
+++ b/Documentation/hwmon/adp1050.rst
@@ -13,18 +13,43 @@ Supported chips:
 
     Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1050.pdf
 
+  * Analog Devices ADP1051
+
+    Prefix: 'adp1051'
+
+    Addresses scanned: I2C 0x70 - 0x77
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1051.pdf
+
+  * Analog Devices ADP1055
+
+    Prefix: 'adp1055'
+
+    Addresses scanned: I2C 0x4B - 0x77
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1055.pdf
+
+  * Analog Devices LTP8800-1A/-2/-4A
+
+    Prefix: 'ltp8800'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/LTP8800-1A.pdf
+         https://www.analog.com/media/en/technical-documentation/data-sheets/LTP8800-2.pdf
+         https://www.analog.com/media/en/technical-documentation/data-sheets/LTP8800-4A.pdf
+
 Authors:
 
   - Radu Sabau <radu.sabau@analog.com>
 
-
 Description
 -----------
 
-This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
-Controller for Isolated Power Supply with PMBus interface.
+This driver supports hardware monitoring for Analog Devices ADP1050, ADP1051, and
+ADP1055 Digital Controller for Isolated Power Supply with PMBus interface.
 
-The ADP1050 is an advanced digital controller with a PMBus™
+The ADP105X is an advanced digital controller with a PMBus™
 interface targeting high density, high efficiency dc-to-dc power
 conversion used to monitor system temperatures, voltages and currents.
 Through the PMBus interface, the device can monitor input/output voltages,
@@ -49,16 +74,46 @@ Sysfs Attributes
 in1_label         "vin"
 in1_input         Measured input voltage
 in1_alarm	  Input voltage alarm
+in1_crit          Critical maximum input voltage
+in1_crit_alarm    Input voltage high alarm
+in1_lcrit         Critical minimum input voltage
+in1_lcrit_alarm   Input voltage critical low alarm
 in2_label	  "vout1"
 in2_input	  Measured output voltage
 in2_crit	  Critical maximum output voltage
 in2_crit_alarm    Output voltage high alarm
 in2_lcrit	  Critical minimum output voltage
 in2_lcrit_alarm	  Output voltage critical low alarm
+in2_max           Critical maximum output voltage
+in2_max_alarm     Output voltage critical max alarm
+in2_min           Critical minimum output voltage
+in2_min_alarm     Output voltage critical min alarm
 curr1_label	  "iin"
 curr1_input	  Measured input current.
 curr1_alarm	  Input current alarm
+curr1_crit        Critical maximum input current
+curr1_crit_alarm  Input current high alarm
+curr2_label       "iout1"
+curr2_input       Measured output current
+curr2_alarm	  Output current alarm
+curr2_crit        Critical maximum output current
+curr2_crit_alarm  Output current high alarm
+curr2_lcrit       Critical minimum output current
+curr2_lcrit_alarm Output current critical low alarm
+curr2_max         Critical maximum output current
+curr2_max_alarm   Output current critical max alarm
+power1_label      "pout1"
+power1_input      Measured output power
+power1_crit       Critical maximum output power
+power1_crit_alarm Output power high alarm
 temp1_input       Measured temperature
 temp1_crit	  Critical high temperature
 temp1_crit_alarm  Chip temperature critical high alarm
+temp1_max         Critical maximum temperature
+temp1_max_alarm   Temperature critical max alarm
+temp2_input       Measured temperature
+temp2_crit        Critical high temperature
+temp2_crit_alarm  Chip temperature critical high alarm
+temp2_max         Critical maximum temperature
+temp2_max_alarm   Temperature critical max alarm
 ================= ========================================
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index f6d352841953..5d03a307824e 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -67,6 +67,15 @@ config SENSORS_ADP1050
 	  This driver can also be built as a module. If so, the module will
 	  be called adp1050.
 
+config SENSORS_ADP1050_REGULATOR
+	bool "Regulator support for ADP1050 and compatibles"
+	depends on SENSORS_ADP1050 && REGULATOR
+	help
+	  If you say yes here you get regulator support for Analog Devices
+	  LTP8800-1A, LTP8800-4A, and LTP8800-2. LTP8800 is a family of DC/DC
+	  µModule regulators that can provide microprocessor power from 54V
+	  power distribution architecture.
+
 config SENSORS_BEL_PFE
 	tristate "Bel PFE Compatible Power Supplies"
 	help
diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
index 20f22730fc01..46f2dda8adbb 100644
--- a/drivers/hwmon/pmbus/adp1050.c
+++ b/drivers/hwmon/pmbus/adp1050.c
@@ -11,6 +11,12 @@
 
 #include "pmbus.h"
 
+#if IS_ENABLED(CONFIG_SENSORS_ADP1050_REGULATOR)
+static const struct regulator_desc adp1050_reg_desc[] = {
+	PMBUS_REGULATOR_ONE("vout"),
+};
+#endif /* CONFIG_SENSORS_ADP1050_REGULATOR */
+
 static struct pmbus_driver_info adp1050_info = {
 	.pages = 1,
 	.format[PSC_VOLTAGE_IN] = linear,
@@ -23,19 +29,79 @@ static struct pmbus_driver_info adp1050_info = {
 		| PMBUS_HAVE_STATUS_TEMP,
 };
 
+static struct pmbus_driver_info adp1051_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT
+		| PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT
+		| PMBUS_HAVE_STATUS_TEMP,
+};
+
+static struct pmbus_driver_info adp1055_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT
+		| PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3
+		| PMBUS_HAVE_POUT
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT
+		| PMBUS_HAVE_STATUS_TEMP,
+};
+
+static struct pmbus_driver_info ltp8800_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT
+		| PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_POUT
+		| PMBUS_HAVE_STATUS_VOUT
+		| PMBUS_HAVE_STATUS_INPUT
+		| PMBUS_HAVE_STATUS_TEMP,
+#if IS_ENABLED(CONFIG_SENSORS_ADP1050_REGULATOR)
+	.num_regulators = 1,
+	.reg_desc = adp1050_reg_desc,
+#endif
+};
+
 static int adp1050_probe(struct i2c_client *client)
 {
-	return pmbus_do_probe(client, &adp1050_info);
+	const struct pmbus_driver_info *info;
+
+	info = device_get_match_data(&client->dev);
+	if (!info)
+		return -ENODEV;
+
+	return pmbus_do_probe(client, info);
 }
 
 static const struct i2c_device_id adp1050_id[] = {
-	{"adp1050"},
+	{ .name = "adp1050", .driver_data = (kernel_ulong_t)&adp1050_info},
+	{ .name = "adp1051", .driver_data = (kernel_ulong_t)&adp1051_info},
+	{ .name = "adp1055", .driver_data = (kernel_ulong_t)&adp1055_info},
+	{ .name = "ltp8800", .driver_data = (kernel_ulong_t)&ltp8800_info},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, adp1050_id);
 
 static const struct of_device_id adp1050_of_match[] = {
-	{ .compatible = "adi,adp1050"},
+	{ .compatible = "adi,adp1050", .data = &adp1050_info},
+	{ .compatible = "adi,adp1051", .data = &adp1051_info},
+	{ .compatible = "adi,adp1055", .data = &adp1055_info},
+	{ .compatible = "adi,ltp8800", .data = &ltp8800_info},
 	{}
 };
 MODULE_DEVICE_TABLE(of, adp1050_of_match);
-- 
2.39.5