[PATCH v5 1/9] dt-bindings: display: bindings for starfive,JH7110 display pipeline

[keith zhao <keith.zhao@starfivetech.com>]

- Added bindings to support the display subsystem on the JH7110 SoC.

- Included the DC8200 display controller and Inno HDMI controller.

- Created innosilicon,inno-hdmi.yaml schema containing common properties
  for the Inno DesignWare HDMI TX controller.
  This isn't a full device tree binding specification,
  but is intended to be referenced by platform-specific bindings
  for the IP core.

Signed-off-by: keith zhao <keith.zhao@starfivetech.com>
---
 .../display/bridge/innosilicon,inno-hdmi.yaml |  45 +++++
 .../display/rockchip/rockchip,inno-hdmi.yaml  |  27 +--
 .../starfive/starfive,jh7110-dc8200.yaml      | 176 ++++++++++++++++++
 .../starfive/starfive,jh7110-inno-hdmi.yaml   |  91 +++++++++
 .../soc/starfive/starfive,jh7110-syscon.yaml  |   1 +
 MAINTAINERS                                   |   8 +
 6 files changed, 323 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml
new file mode 100644
index 000000000000..f2543aebc312
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/innosilicon,inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Innosilicon HDMI TX IP
+
+maintainers:
+  - keith zhao <keith.zhao@starfivetech.com>
+
+description: |
+  Innosilicon HDMI TX is an HDMI transmission device integrated into the zap SoC.
+  This document specifies the device tree properties for the INNO HDMI IP core.
+  It is intended to be referenced by platform-specific device tree bindings,
+  which will determine the necessity of each property.
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a display controller node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
index 5b87b0f1963e..589dedfcbee0 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
@@ -16,12 +16,6 @@ properties:
       - rockchip,rk3036-inno-hdmi
       - rockchip,rk3128-inno-hdmi
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   clocks:
     minItems: 1
     items:
@@ -40,24 +34,6 @@ properties:
   "#sound-dai-cells":
     const: 0
 
-  ports:
-    $ref: /schemas/graph.yaml#/properties/ports
-
-    properties:
-      port@0:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Port node with one endpoint connected to a vop node.
-
-      port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Port node with one endpoint connected to a hdmi-connector node.
-
-    required:
-      - port@0
-      - port@1
-
 required:
   - compatible
   - reg
@@ -69,6 +45,7 @@ required:
   - ports
 
 allOf:
+  - $ref: ../bridge/innosilicon,inno-hdmi.yaml#
   - $ref: /schemas/sound/dai-common.yaml#
   - if:
       properties:
@@ -95,7 +72,7 @@ allOf:
       required:
         - power-domains
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
new file mode 100644
index 000000000000..5f57c405e857
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 SoC Display Controller (DC8200)
+
+description:
+  The STARFIVE JH7110 SoC uses the display controller based on Verisilicon
+  IP(DC8200) to transfer the image data from a video memory buffer to an
+  external LCD interface.
+
+  pipe0 binds HDMI for primary display,
+  pipe1 binds DSI for external display.
+
+          +------------------------------+
+          |                              |
+          |                              |
+  +----+  |   +-------------------+      |   +-------+   +------+   +------+
+  |    +----->+  dc controller 0  +--->----->+HDMICtl| ->+ PHY  +-->+PANEL0+
+  |AXI |  |   +-------------------+      |   +-------+   +------+   +------+
+  |    |  |                              |
+  |    |  |                              |
+  |    |  |                              |
+  |    |  |                              |
+  |APB |  |   +-------------------+         +---------+    +------+  +-------+
+  |    +----->+  dc controller 1  +--->---->+ dsiTx   +--->+DPHY  +->+ PANEL1+
+  |    |  |   +-------------------+         +---------+    +------+  +-------+
+  +----+  |                              |
+          +------------------------------+
+
+maintainers:
+  - keith zhao <keith.zhao@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-dc8200
+
+  reg:
+    items:
+      - description: host interface
+      - description: display physical base
+
+  reg-names:
+    items:
+      - const: host
+      - const: base
+
+  clocks:
+    items:
+      - description: Clock for display system noc bus.
+      - description: Core clock for display controller.
+      - description: Clock for axi bus to access ddr.
+      - description: Clock for ahb bus to R/W the phy regs.
+      - description: Pixel clock for display channel 0.
+      - description: Pixel clock for display channel 1.
+      - description: Pixel clock from hdmi.
+      - description: Pixel clock for soc .
+
+  clock-names:
+    items:
+      - const: noc_bus
+      - const: dc_core
+      - const: axi_core
+      - const: ahb
+      - const: channel0
+      - const: channel1
+      - const: hdmi_tx
+      - const: dc_parent
+
+  resets:
+    items:
+      - description: Reset for axi bus.
+      - description: Reset for ahb bus.
+      - description: Core reset of display controller.
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: core
+
+  interrupts:
+    items:
+      - description: The interrupt will be generated when DC finish one frame
+
+  starfive,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the general register files syscon
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          channel 0 output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          channel 1 output
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+    dc8200: lcd-controller@29400000 {
+        compatible = "starfive,jh7110-dc8200";
+        reg = <0x29400000 0x100>,
+              <0x29400800 0x2000>;
+        reg-names = "host", "base";
+
+        interrupts = <95>;
+        clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_DISP_AXI>,
+                 <&voutcrg JH7110_VOUTCLK_DC8200_CORE>,
+                 <&voutcrg JH7110_VOUTCLK_DC8200_AXI>,
+                 <&voutcrg JH7110_VOUTCLK_DC8200_AHB>,
+                 <&voutcrg JH7110_VOUTCLK_DC8200_PIX0>,
+                 <&voutcrg JH7110_VOUTCLK_DC8200_PIX1>,
+                 <&hdmitx0_pixelclk>,
+                 <&voutcrg JH7110_VOUTCLK_DC8200_PIX>;
+        clock-names = "noc_bus", "dc_core", "axi_core", "ahb",
+                      "channel0", "channel1", "hdmi_tx", "dc_parent";
+        resets = <&voutcrg JH7110_VOUTRST_DC8200_AXI>,
+                 <&voutcrg JH7110_VOUTRST_DC8200_AHB>,
+                 <&voutcrg JH7110_VOUTRST_DC8200_CORE>;
+        reset-names = "axi", "ahb", "core";
+
+        starfive,syscon = <&vout_syscon>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            dc_out0: port@0 {
+                reg = <0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                dc_out_dpi0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&hdmi_enc>;
+                };
+
+            };
+
+            dc_out1: port@1 {
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                dc_out_dpi1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&dsi_enc>;
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
new file mode 100644
index 000000000000..62cb62885d71
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 Innosilicon HDMI controller
+
+maintainers:
+  - keith zhao <keith.zhao@starfivetech.com>
+
+description: |
+  Innosilicon HDMI TX IP is designed for transmitting video and audio data
+  from a video source device to a display device.
+  It contains a digital controller and a physical layer.
+
+allOf:
+  - $ref: ../bridge/innosilicon,inno-hdmi.yaml#
+
+properties:
+  compatible:
+    const: "starfive,jh7110-inno-hdmi"
+
+  clocks:
+    items:
+      - description: System clock of HDMI module.
+      - description: Mclk clock of HDMI audio.
+      - description: Bclk clock of HDMI audio.
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: mclk
+      - const: bclk
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    hdmi: hdmi@29590000 {
+        compatible = "starfive,jh7110-inno-hdmi";
+        reg = <0x29590000 0x4000>;
+        interrupts = <99>;
+        clocks = <&voutcrg 17>, <&voutcrg 15>, <&voutcrg 16>;
+        clock-names = "sysclk", "mclk","bclk";
+        resets = <&voutcrg 9>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            hdmi_in: port@0 {
+                reg = <0>;
+                hdmi_in_vop: endpoint {
+                    remote-endpoint = <&dc_out_dpi0>;
+                };
+            };
+
+            hdmi_out: port@1 {
+                reg = <1>;
+                hdmi_out_con: endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
+            };
+        };
+    };
+
+    hdmi-out {
+        compatible = "hdmi-connector";
+        type = "a";
+
+        port {
+            hdmi_con_in: endpoint {
+                remote-endpoint = <&hdmi_out_con>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
index 0039319e91fe..cf9b657d0e8a 100644
--- a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
+++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
@@ -24,6 +24,7 @@ properties:
           - enum:
               - starfive,jh7110-aon-syscon
               - starfive,jh7110-stg-syscon
+              - starfive,jh7110-vout-syscon
           - const: syscon
 
   reg:
diff --git a/MAINTAINERS b/MAINTAINERS
index 84086d47db69..f787dd625497 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7432,6 +7432,14 @@ T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	Documentation/devicetree/bindings/display/ste,mcde.yaml
 F:	drivers/gpu/drm/mcde/
 
+DRM DRIVERS FOR STARFIVE
+M:	Keith Zhao <keith.zhao@starfivetech.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
+F:	Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml
+F:	Documentation/devicetree/bindings/display/starfive/
+
 DRM DRIVER FOR SYNAPTICS R63353 PANELS
 M:	Michael Trimarchi <michael@amarulasolutions.com>
 S:	Maintained
-- 
2.34.1