From: Frank Sae <Frank.Sae@motor-comm.com>
To: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
xiaogang.fan@motor-comm.com, fei.zhang@motor-comm.com,
hua.sun@motor-comm.com, Frank.Sae@motor-comm.com
Subject: [PATCH net-next v2 00/21] net:yt6801: Add Motorcomm yt6801 PCIe driver
Date: Wed, 20 Nov 2024 18:56:04 +0800 [thread overview]
Message-ID: <20241120105625.22508-1-Frank.Sae@motor-comm.com> (raw)
This series includes adding Motorcomm YT6801 Gigabit ethernet driver
and adding yt6801 ethernet driver entry in MAINTAINERS file.
YT6801 integrates a YT8531S phy.
v1 -> v2:
- Split this driver into multiple patches.
- Reorganize this driver code and remove redundant code
- Remove PHY handling code and use phylib.
- Remove writing ASPM config
- Use generic power management instead of pci_driver.suspend()/resume()
- Add Space before closing "*/"
Frank Sae (21):
motorcomm:yt6801: Add support for a pci table in this module
motorcomm:yt6801: Implement pci_driver shutdown
motorcomm:yt6801: Implement the fxgmac_drv_probe function
motorcomm:yt6801: Implement the .ndo_open function
motorcomm:yt6801: Implement the fxgmac_start function
motorcomm:yt6801: Implement the poll functions
motorcomm:yt6801: Implement the fxgmac_init function
motorcomm:yt6801: Implement the fxgmac_read_mac_addr function
motorcomm:yt6801: Implement some hw_ops function
motorcomm:yt6801: Implement .ndo_start_xmit function
motorcomm:yt6801: Implement some net_device_ops function
motorcomm:yt6801: Implement .ndo_tx_timeout and .ndo_change_mtu
functions
motorcomm:yt6801: Implement some ethtool_ops function
motorcomm:yt6801: Implement the WOL function of ethtool_ops
motorcomm:yt6801: Implement pci_driver suspend and resume
motorcomm:yt6801: Add a Makefile in the motorcomm folder
motorcomm:yt6801: Update the Makefile and Kconfig in the motorcomm
motorcomm:yt6801: Update the Makefile and Kconfig in the ethernet
ethernet: Update the index.rst in the ethernet documentation folder
motorcomm:yt6801: Add a yt6801.rst in the ethernet documentation
folder
MAINTAINERS：Add the motorcomm ethernet driver entry
.../device_drivers/ethernet/index.rst | 1 +
.../ethernet/motorcomm/yt6801.rst | 20 +
MAINTAINERS | 8 +
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/motorcomm/Kconfig | 27 +
drivers/net/ethernet/motorcomm/Makefile | 6 +
.../net/ethernet/motorcomm/yt6801/Makefile | 9 +
.../net/ethernet/motorcomm/yt6801/yt6801.h | 617 +++
.../ethernet/motorcomm/yt6801/yt6801_desc.c | 638 ++++
.../ethernet/motorcomm/yt6801/yt6801_desc.h | 39 +
.../motorcomm/yt6801/yt6801_ethtool.c | 907 +++++
.../net/ethernet/motorcomm/yt6801/yt6801_hw.c | 3383 +++++++++++++++++
.../ethernet/motorcomm/yt6801/yt6801_net.c | 2908 ++++++++++++++
.../ethernet/motorcomm/yt6801/yt6801_net.h | 32 +
.../ethernet/motorcomm/yt6801/yt6801_pci.c | 191 +
.../ethernet/motorcomm/yt6801/yt6801_type.h | 1398 +++++++
17 files changed, 10186 insertions(+)
create mode 100644 Documentation/networking/device_drivers/ethernet/motorcomm/yt6801.rst
create mode 100644 drivers/net/ethernet/motorcomm/Kconfig
create mode 100644 drivers/net/ethernet/motorcomm/Makefile
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/Makefile
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801.h
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801_desc.c
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801_desc.h
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801_ethtool.c
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801_hw.c
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801_net.c
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801_net.h
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801_pci.c
create mode 100644 drivers/net/ethernet/motorcomm/yt6801/yt6801_type.h
--
2.34.1
next reply other threads:[~2024-11-20 10:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-20 10:56 Frank Sae [this message]
2024-11-20 10:56 ` [PATCH net-next v2 03/21] motorcomm:yt6801: Implement the fxgmac_drv_probe function Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 04/21] motorcomm:yt6801: Implement the .ndo_open function Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 05/21] motorcomm:yt6801: Implement the fxgmac_start function Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 08/21] motorcomm:yt6801: Implement the fxgmac_read_mac_addr function Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 12/21] motorcomm:yt6801: Implement .ndo_tx_timeout and .ndo_change_mtu functions Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 13/21] motorcomm:yt6801: Implement some ethtool_ops function Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 14/21] motorcomm:yt6801: Implement the WOL function of ethtool_ops Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 15/21] motorcomm:yt6801: Implement pci_driver suspend and resume Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 16/21] motorcomm:yt6801: Add a Makefile in the motorcomm folder Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 17/21] motorcomm:yt6801: Update the Makefile and Kconfig in the motorcomm Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 18/21] motorcomm:yt6801: Update the Makefile and Kconfig in the ethernet Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 19/21] ethernet: Update the index.rst in the ethernet documentation folder Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 20/21] motorcomm:yt6801: Add a yt6801.rst " Frank Sae
2024-11-20 10:56 ` [PATCH net-next v2 21/21] MAINTAINERS：Add the motorcomm ethernet driver entry Frank Sae
2024-11-20 11:14 ` [PATCH net-next v2 11/21] motorcomm:yt6801: Implement some net_device_ops function Frank Sae
2024-11-20 11:14 ` [PATCH net-next v2 09/21] motorcomm:yt6801: Implement some hw_ops function Frank Sae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241120105625.22508-1-Frank.Sae@motor-comm.com \
--to=frank.sae@motor-comm.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fei.zhang@motor-comm.com \
--cc=hua.sun@motor-comm.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=xiaogang.fan@motor-comm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox