[PATCH net-next v2 17/21] motorcomm:yt6801: Update the Makefile and Kconfig in the motorcomm

[Frank Sae <Frank.Sae@motor-comm.com>]

1. Add the YT6801 and NET_VENDOR_MOTORCOMM entry in the Kconfig.
2. Add the CONFIG_YT6801 entry in the Makefile.

Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
---
 drivers/net/ethernet/motorcomm/Kconfig  | 27 +++++++++++++++++++++++++
 drivers/net/ethernet/motorcomm/Makefile |  6 ++++++
 2 files changed, 33 insertions(+)
 create mode 100644 drivers/net/ethernet/motorcomm/Kconfig
 create mode 100644 drivers/net/ethernet/motorcomm/Makefile

diff --git a/drivers/net/ethernet/motorcomm/Kconfig b/drivers/net/ethernet/motorcomm/Kconfig
new file mode 100644
index 000000000..e85d11687
--- /dev/null
+++ b/drivers/net/ethernet/motorcomm/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Motorcomm network device configuration
+#
+
+config NET_VENDOR_MOTORCOMM
+	bool "Motorcomm devices"
+	default y
+	help
+	  If you have a network (Ethernet) device belonging to this class,
+	  say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Synopsys devices. If you say Y, you will be asked
+	  for your specific device in the following questions.
+
+if NET_VENDOR_MOTORCOMM
+
+config YT6801
+	tristate "Motorcomm(R) 6801 PCI-Express Gigabit Ethernet support"
+	depends on PCI && NET
+	help
+	  This driver supports Motorcomm(R) 6801 gigabit ethernet family of
+	  adapters.
+
+endif # NET_VENDOR_MOTORCOMM
diff --git a/drivers/net/ethernet/motorcomm/Makefile b/drivers/net/ethernet/motorcomm/Makefile
new file mode 100644
index 000000000..511940680
--- /dev/null
+++ b/drivers/net/ethernet/motorcomm/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Motorcomm network device drivers.
+#
+
+obj-$(CONFIG_YT6801) += yt6801/
-- 
2.34.1