From: Fenghua Yu <fenghua.yu@intel.com>
To: "Vinod Koul" <vkoul@kernel.org>, "Dave Jiang" <dave.jiang@intel.com>
Cc: dmaengine@vger.kernel.org,
"linux-kernel" <linux-kernel@vger.kernel.org>,
Fenghua Yu <fenghua.yu@intel.com>
Subject: [PATCH v2 1/5] dmaengine: idxd: Add idxd_pci_probe_alloc() helper
Date: Fri, 22 Nov 2024 15:30:24 -0800 [thread overview]
Message-ID: <20241122233028.2762809-2-fenghua.yu@intel.com> (raw)
In-Reply-To: <20241122233028.2762809-1-fenghua.yu@intel.com>
Add the idxd_pci_probe_alloc() helper to probe IDXD PCI device with or
without allocating and setting idxd software values.
The idxd_pci_probe() function is refactored to call this helper and
always probe the IDXD device with allocating and setting the software
values.
This helper will be called later in the Function Level Reset (FLR)
process without modifying the idxd software data.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
drivers/dma/idxd/idxd.h | 2 +
drivers/dma/idxd/init.c | 102 ++++++++++++++++++++++++----------------
2 files changed, 64 insertions(+), 40 deletions(-)
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index d84e21daa991..1f93dd6db28f 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -742,6 +742,8 @@ void idxd_unmask_error_interrupts(struct idxd_device *idxd);
/* device control */
int idxd_device_drv_probe(struct idxd_dev *idxd_dev);
+int idxd_pci_probe_alloc(struct idxd_device *idxd, struct pci_dev *pdev,
+ const struct pci_device_id *id);
void idxd_device_drv_remove(struct idxd_dev *idxd_dev);
int idxd_drv_enable_wq(struct idxd_wq *wq);
void idxd_drv_disable_wq(struct idxd_wq *wq);
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index 234c1c658ec7..6679105336ca 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -723,67 +723,84 @@ static void idxd_cleanup(struct idxd_device *idxd)
idxd_disable_sva(idxd->pdev);
}
-static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+/*
+ * Probe idxd PCI device.
+ * If idxd is not given, need to allocate idxd and set up its data.
+ *
+ * If idxd is given, idxd was allocated and setup already. Just need to
+ * configure device without re-allocating and re-configuring idxd data.
+ * This is useful for recovering from FLR.
+ */
+int idxd_pci_probe_alloc(struct idxd_device *idxd, struct pci_dev *pdev,
+ const struct pci_device_id *id)
{
- struct device *dev = &pdev->dev;
- struct idxd_device *idxd;
- struct idxd_driver_data *data = (struct idxd_driver_data *)id->driver_data;
+ bool alloc_idxd = idxd ? false : true;
+ struct idxd_driver_data *data;
+ struct device *dev;
int rc;
+ pdev = idxd ? idxd->pdev : pdev;
+ dev = &pdev->dev;
+ data = id ? (struct idxd_driver_data *)id->driver_data : NULL;
rc = pci_enable_device(pdev);
if (rc)
return rc;
- dev_dbg(dev, "Alloc IDXD context\n");
- idxd = idxd_alloc(pdev, data);
- if (!idxd) {
- rc = -ENOMEM;
- goto err_idxd_alloc;
- }
+ if (alloc_idxd) {
+ dev_dbg(dev, "Alloc IDXD context\n");
+ idxd = idxd_alloc(pdev, data);
+ if (!idxd) {
+ rc = -ENOMEM;
+ goto err_idxd_alloc;
+ }
- dev_dbg(dev, "Mapping BARs\n");
- idxd->reg_base = pci_iomap(pdev, IDXD_MMIO_BAR, 0);
- if (!idxd->reg_base) {
- rc = -ENOMEM;
- goto err_iomap;
- }
+ dev_dbg(dev, "Mapping BARs\n");
+ idxd->reg_base = pci_iomap(pdev, IDXD_MMIO_BAR, 0);
+ if (!idxd->reg_base) {
+ rc = -ENOMEM;
+ goto err_iomap;
+ }
- dev_dbg(dev, "Set DMA masks\n");
- rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (rc)
- goto err;
+ dev_dbg(dev, "Set DMA masks\n");
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (rc)
+ goto err;
+ }
dev_dbg(dev, "Set PCI master\n");
pci_set_master(pdev);
pci_set_drvdata(pdev, idxd);
- idxd->hw.version = ioread32(idxd->reg_base + IDXD_VER_OFFSET);
- rc = idxd_probe(idxd);
- if (rc) {
- dev_err(dev, "Intel(R) IDXD DMA Engine init failed\n");
- goto err;
- }
+ if (alloc_idxd) {
+ idxd->hw.version = ioread32(idxd->reg_base + IDXD_VER_OFFSET);
+ rc = idxd_probe(idxd);
+ if (rc) {
+ dev_err(dev, "Intel(R) IDXD DMA Engine init failed\n");
+ goto err;
+ }
- if (data->load_device_defaults) {
- rc = data->load_device_defaults(idxd);
- if (rc)
- dev_warn(dev, "IDXD loading device defaults failed\n");
- }
+ if (data->load_device_defaults) {
+ rc = data->load_device_defaults(idxd);
+ if (rc)
+ dev_warn(dev, "IDXD loading device defaults failed\n");
+ }
- rc = idxd_register_devices(idxd);
- if (rc) {
- dev_err(dev, "IDXD sysfs setup failed\n");
- goto err_dev_register;
- }
+ rc = idxd_register_devices(idxd);
+ if (rc) {
+ dev_err(dev, "IDXD sysfs setup failed\n");
+ goto err_dev_register;
+ }
- rc = idxd_device_init_debugfs(idxd);
- if (rc)
- dev_warn(dev, "IDXD debugfs failed to setup\n");
+ rc = idxd_device_init_debugfs(idxd);
+ if (rc)
+ dev_warn(dev, "IDXD debugfs failed to setup\n");
+ }
dev_info(&pdev->dev, "Intel(R) Accelerator Device (v%x)\n",
idxd->hw.version);
- idxd->user_submission_safe = data->user_submission_safe;
+ if (data)
+ idxd->user_submission_safe = data->user_submission_safe;
return 0;
@@ -798,6 +815,11 @@ static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return rc;
}
+static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ return idxd_pci_probe_alloc(NULL, pdev, id);
+}
+
void idxd_wqs_quiesce(struct idxd_device *idxd)
{
struct idxd_wq *wq;
--
2.37.1
next prev parent reply other threads:[~2024-11-22 23:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-22 23:30 [PATCH v2 0/5] Enable FLR for IDXD halt Fenghua Yu
2024-11-22 23:30 ` Fenghua Yu [this message]
2024-11-22 23:30 ` [PATCH v2 2/5] dmaengine: idxd: Binding and unbinding IDXD device and driver Fenghua Yu
2024-11-22 23:30 ` [PATCH v2 3/5] dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers Fenghua Yu
2024-11-22 23:30 ` [PATCH v2 4/5] dmaengine: idxd: Refactor halt handler Fenghua Yu
2024-11-22 23:30 ` [PATCH v2 5/5] dmaengine: idxd: Enable Function Level Reset (FLR) for halt Fenghua Yu
2024-12-02 22:15 ` [PATCH v2 0/5] Enable FLR for IDXD halt Dave Jiang
2024-12-24 10:42 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241122233028.2762809-2-fenghua.yu@intel.com \
--to=fenghua.yu@intel.com \
--cc=dave.jiang@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox