From: Naman Jain <namjain@linux.microsoft.com>
To: "K . Y . Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Wei Liu <wei.liu@kernel.org>, Dexuan Cui <decui@microsoft.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org,
Saurabh Sengar <ssengar@linux.microsoft.com>
Subject: [PATCH] uio_hv_generic: Add a check for HV_NIC for send, receive buffers setup
Date: Mon, 25 Nov 2024 12:50:15 +0000 [thread overview]
Message-ID: <20241125125015.1500-1-namjain@linux.microsoft.com> (raw)
Support for send and receive buffers was added for networking usecases
in UIO devices. There is no known usecase of these buffers for devices
other than HV_NIC. Add a check for HV_NIC in probe function to avoid
memory allocation and GPADL setup which would save 47 MB memory per
device type.
While at it, fix some of the syntax related issues in the touched code
which are reported by "--strict" option of checkpatch.
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
---
drivers/uio/uio_hv_generic.c | 86 ++++++++++++++++++------------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c
index 3976360d0096..1b19b5647495 100644
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -296,51 +296,51 @@ hv_uio_probe(struct hv_device *dev,
pdata->info.mem[MON_PAGE_MAP].size = PAGE_SIZE;
pdata->info.mem[MON_PAGE_MAP].memtype = UIO_MEM_LOGICAL;
- pdata->recv_buf = vzalloc(RECV_BUFFER_SIZE);
- if (pdata->recv_buf == NULL) {
- ret = -ENOMEM;
- goto fail_free_ring;
+ if (channel->device_id == HV_NIC) {
+ pdata->recv_buf = vzalloc(RECV_BUFFER_SIZE);
+ if (!pdata->recv_buf) {
+ ret = -ENOMEM;
+ goto fail_free_ring;
+ }
+
+ ret = vmbus_establish_gpadl(channel, pdata->recv_buf,
+ RECV_BUFFER_SIZE, &pdata->recv_gpadl);
+ if (ret) {
+ if (!pdata->recv_gpadl.decrypted)
+ vfree(pdata->recv_buf);
+ goto fail_close;
+ }
+
+ /* put Global Physical Address Label in name */
+ snprintf(pdata->recv_name, sizeof(pdata->recv_name),
+ "recv:%u", pdata->recv_gpadl.gpadl_handle);
+ pdata->info.mem[RECV_BUF_MAP].name = pdata->recv_name;
+ pdata->info.mem[RECV_BUF_MAP].addr = (uintptr_t)pdata->recv_buf;
+ pdata->info.mem[RECV_BUF_MAP].size = RECV_BUFFER_SIZE;
+ pdata->info.mem[RECV_BUF_MAP].memtype = UIO_MEM_VIRTUAL;
+
+ pdata->send_buf = vzalloc(SEND_BUFFER_SIZE);
+ if (!pdata->send_buf) {
+ ret = -ENOMEM;
+ goto fail_close;
+ }
+
+ ret = vmbus_establish_gpadl(channel, pdata->send_buf,
+ SEND_BUFFER_SIZE, &pdata->send_gpadl);
+ if (ret) {
+ if (!pdata->send_gpadl.decrypted)
+ vfree(pdata->send_buf);
+ goto fail_close;
+ }
+
+ snprintf(pdata->send_name, sizeof(pdata->send_name),
+ "send:%u", pdata->send_gpadl.gpadl_handle);
+ pdata->info.mem[SEND_BUF_MAP].name = pdata->send_name;
+ pdata->info.mem[SEND_BUF_MAP].addr = (uintptr_t)pdata->send_buf;
+ pdata->info.mem[SEND_BUF_MAP].size = SEND_BUFFER_SIZE;
+ pdata->info.mem[SEND_BUF_MAP].memtype = UIO_MEM_VIRTUAL;
}
- ret = vmbus_establish_gpadl(channel, pdata->recv_buf,
- RECV_BUFFER_SIZE, &pdata->recv_gpadl);
- if (ret) {
- if (!pdata->recv_gpadl.decrypted)
- vfree(pdata->recv_buf);
- goto fail_close;
- }
-
- /* put Global Physical Address Label in name */
- snprintf(pdata->recv_name, sizeof(pdata->recv_name),
- "recv:%u", pdata->recv_gpadl.gpadl_handle);
- pdata->info.mem[RECV_BUF_MAP].name = pdata->recv_name;
- pdata->info.mem[RECV_BUF_MAP].addr
- = (uintptr_t)pdata->recv_buf;
- pdata->info.mem[RECV_BUF_MAP].size = RECV_BUFFER_SIZE;
- pdata->info.mem[RECV_BUF_MAP].memtype = UIO_MEM_VIRTUAL;
-
- pdata->send_buf = vzalloc(SEND_BUFFER_SIZE);
- if (pdata->send_buf == NULL) {
- ret = -ENOMEM;
- goto fail_close;
- }
-
- ret = vmbus_establish_gpadl(channel, pdata->send_buf,
- SEND_BUFFER_SIZE, &pdata->send_gpadl);
- if (ret) {
- if (!pdata->send_gpadl.decrypted)
- vfree(pdata->send_buf);
- goto fail_close;
- }
-
- snprintf(pdata->send_name, sizeof(pdata->send_name),
- "send:%u", pdata->send_gpadl.gpadl_handle);
- pdata->info.mem[SEND_BUF_MAP].name = pdata->send_name;
- pdata->info.mem[SEND_BUF_MAP].addr
- = (uintptr_t)pdata->send_buf;
- pdata->info.mem[SEND_BUF_MAP].size = SEND_BUFFER_SIZE;
- pdata->info.mem[SEND_BUF_MAP].memtype = UIO_MEM_VIRTUAL;
-
pdata->info.priv = pdata;
pdata->device = dev;
base-commit: 85a2dd7d7c8152cb125712a1ecae1d0a6ccac250
--
2.25.1
next reply other threads:[~2024-11-25 12:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-25 12:50 Naman Jain [this message]
2024-11-26 16:33 ` [PATCH] uio_hv_generic: Add a check for HV_NIC for send, receive buffers setup Saurabh Singh Sengar
2024-11-27 6:51 ` Naman Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241125125015.1500-1-namjain@linux.microsoft.com \
--to=namjain@linux.microsoft.com \
--cc=decui@microsoft.com \
--cc=gregkh@linuxfoundation.org \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ssengar@linux.microsoft.com \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox