From: Peter Zijlstra <peterz@infradead.org>
To: jpoimboe@kernel.org
Cc: chenhuacai@kernel.org, kernel@xen0n.name, x86@kernel.org,
peterz@infradead.org, loongarch@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 04/16] objtool: Convert instrumentation_{begin,end}() to ANNOTATE
Date: Thu, 28 Nov 2024 10:38:55 +0100 [thread overview]
Message-ID: <20241128094311.245980207@infradead.org> (raw)
In-Reply-To: 20241128093851.469225872@infradead.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
include/linux/instrumentation.h | 11 +++-----
include/linux/objtool.h | 12 ++++++--
include/linux/objtool_types.h | 2 +
tools/include/linux/objtool_types.h | 2 +
tools/objtool/check.c | 49 +++++++-----------------------------
5 files changed, 28 insertions(+), 48 deletions(-)
--- a/include/linux/instrumentation.h
+++ b/include/linux/instrumentation.h
@@ -4,14 +4,14 @@
#ifdef CONFIG_NOINSTR_VALIDATION
+#include <linux/objtool.h>
#include <linux/stringify.h>
/* Begin/end of an instrumentation safe region */
#define __instrumentation_begin(c) ({ \
asm volatile(__stringify(c) ": nop\n\t" \
- ".pushsection .discard.instr_begin\n\t" \
- ".long " __stringify(c) "b - .\n\t" \
- ".popsection\n\t" : : "i" (c)); \
+ __ASM_ANNOTATE(__ASM_BREF(c), ANNOTYPE_INSTR_BEGIN)\
+ : : "i" (c)); \
})
#define instrumentation_begin() __instrumentation_begin(__COUNTER__)
@@ -48,9 +48,8 @@
*/
#define __instrumentation_end(c) ({ \
asm volatile(__stringify(c) ": nop\n\t" \
- ".pushsection .discard.instr_end\n\t" \
- ".long " __stringify(c) "b - .\n\t" \
- ".popsection\n\t" : : "i" (c)); \
+ __ASM_ANNOTATE(__ASM_BREF(c), ANNOTYPE_INSTR_END) \
+ : : "i" (c)); \
})
#define instrumentation_end() __instrumentation_end(__COUNTER__)
#else /* !CONFIG_NOINSTR_VALIDATION */
--- a/include/linux/objtool.h
+++ b/include/linux/objtool.h
@@ -51,13 +51,18 @@
".long 998b\n\t" \
".popsection\n\t"
-#define ASM_ANNOTATE(type) \
- "911:\n\t" \
+#define __ASM_BREF(label) label ## b
+
+#define __ASM_ANNOTATE(label, type) \
".pushsection .discard.annotate_insn,\"M\",@progbits,8\n\t" \
- ".long 911b - .\n\t" \
+ ".long " __stringify(label) " - .\n\t" \
".long " __stringify(type) "\n\t" \
".popsection\n\t"
+#define ASM_ANNOTATE(type) \
+ "911:\n\t" \
+ __ASM_ANNOTATE(911b, type)
+
#define ANNOTATE_NOENDBR ASM_ANNOTATE(ANNOTYPE_NOENDBR)
#else /* __ASSEMBLY__ */
@@ -161,6 +166,7 @@
#define UNWIND_HINT(type, sp_reg, sp_offset, signal) "\n\t"
#define STACK_FRAME_NON_STANDARD(func)
#define STACK_FRAME_NON_STANDARD_FP(func)
+#define __ASM_ANNOTATE(label, type)
#define ASM_ANNOTATE(type)
#define ANNOTATE_NOENDBR
#define ASM_REACHABLE
--- a/include/linux/objtool_types.h
+++ b/include/linux/objtool_types.h
@@ -59,5 +59,7 @@ struct unwind_hint {
*/
#define ANNOTYPE_NOENDBR 1
#define ANNOTYPE_RETPOLINE_SAFE 2
+#define ANNOTYPE_INSTR_BEGIN 3
+#define ANNOTYPE_INSTR_END 4
#endif /* _LINUX_OBJTOOL_TYPES_H */
--- a/tools/include/linux/objtool_types.h
+++ b/tools/include/linux/objtool_types.h
@@ -59,5 +59,7 @@ struct unwind_hint {
*/
#define ANNOTYPE_NOENDBR 1
#define ANNOTYPE_RETPOLINE_SAFE 2
+#define ANNOTYPE_INSTR_BEGIN 3
+#define ANNOTYPE_INSTR_END 4
#endif /* _LINUX_OBJTOOL_TYPES_H */
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -2440,48 +2440,19 @@ static int __annotate_retpoline_safe(int
return 0;
}
-static int read_instr_hints(struct objtool_file *file)
+static int __annotate_instr(int type, struct instruction *insn)
{
- struct section *rsec;
- struct instruction *insn;
- struct reloc *reloc;
-
- rsec = find_section_by_name(file->elf, ".rela.discard.instr_end");
- if (!rsec)
- return 0;
-
- for_each_reloc(rsec, reloc) {
- if (reloc->sym->type != STT_SECTION) {
- WARN("unexpected relocation symbol type in %s", rsec->name);
- return -1;
- }
-
- insn = find_insn(file, reloc->sym->sec, reloc_addend(reloc));
- if (!insn) {
- WARN("bad .discard.instr_end entry");
- return -1;
- }
+ switch (type) {
+ case ANNOTYPE_INSTR_BEGIN:
+ insn->instr++;
+ break;
+ case ANNOTYPE_INSTR_END:
insn->instr--;
- }
-
- rsec = find_section_by_name(file->elf, ".rela.discard.instr_begin");
- if (!rsec)
- return 0;
+ break;
- for_each_reloc(rsec, reloc) {
- if (reloc->sym->type != STT_SECTION) {
- WARN("unexpected relocation symbol type in %s", rsec->name);
- return -1;
- }
-
- insn = find_insn(file, reloc->sym->sec, reloc_addend(reloc));
- if (!insn) {
- WARN("bad .discard.instr_begin entry");
- return -1;
- }
-
- insn->instr++;
+ default:
+ break;
}
return 0;
@@ -2730,7 +2701,7 @@ static int decode_sections(struct objtoo
if (ret)
return ret;
- ret = read_instr_hints(file);
+ ret = read_annotate(file, __annotate_instr);
if (ret)
return ret;
next prev parent reply other threads:[~2024-11-28 9:44 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-28 9:38 [PATCH v2 00/16] objtool: Rewrite annotations Peter Zijlstra
2024-11-28 9:38 ` [PATCH v2 01/16] objtool: Generic annotation infrastructure Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:38 ` [PATCH v2 02/16] objtool: Convert ANNOTATE_NOENDBR to ANNOTATE Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:38 ` [PATCH v2 03/16] objtool: Convert ANNOTATE_RETPOLINE_SAFE " Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:38 ` Peter Zijlstra [this message]
2024-12-02 11:15 ` [tip: objtool/core] objtool: Convert instrumentation_{begin,end}() " tip-bot2 for Peter Zijlstra
2024-11-28 9:38 ` [PATCH v2 05/16] objtool: Convert VALIDATE_UNRET_BEGIN " Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:38 ` [PATCH v2 06/16] objtool: Convert ANNOTATE_IGNORE_ALTERNATIVE " Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:38 ` [PATCH v2 07/16] objtool: Convert ANNOTATE_INTRA_FUNCTION_CALL " Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:38 ` [PATCH v2 08/16] objtool: Collapse annotate sequences Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:39 ` [PATCH v2 09/16] objtool: Collect more annotations in objtool.h Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:39 ` [PATCH v2 10/16] unreachable: Unify Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:39 ` [PATCH v2 11/16] x86: Convert unreachable() to BUG() Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-12-16 9:32 ` Peter Zijlstra
2024-12-24 9:47 ` [tip: objtool/core] x86/mm: " tip-bot2 for Peter Zijlstra
2024-11-28 9:39 ` [PATCH v2 12/16] loongarch: Use ASM_REACHABLE Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:39 ` [PATCH v2 13/16] objtool: Remove annotate_{,un}reachable() Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:39 ` [PATCH v2 14/16] objtool: Convert {.UN}REACHABLE to ANNOTATE Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:39 ` [PATCH v2 15/16] objtool: Fix ANNOTATE_REACHABLE to be a normal annotation Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 9:39 ` [PATCH v2 16/16] objtool: Warn about unknown annotation types Peter Zijlstra
2024-12-02 11:15 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2024-11-28 18:44 ` [PATCH v2 00/16] objtool: Rewrite annotations Josh Poimboeuf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241128094311.245980207@infradead.org \
--to=peterz@infradead.org \
--cc=chenhuacai@kernel.org \
--cc=jpoimboe@kernel.org \
--cc=kernel@xen0n.name \
--cc=linux-kernel@vger.kernel.org \
--cc=loongarch@lists.linux.dev \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox