From: Andrew Davis <afd@ti.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: <linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Andrew Davis <afd@ti.com>
Subject: [PATCH 2/5] power: supply: ds2782: Free IDA with devm action
Date: Mon, 2 Dec 2024 15:15:16 -0600 [thread overview]
Message-ID: <20241202211519.199635-2-afd@ti.com> (raw)
In-Reply-To: <20241202211519.199635-1-afd@ti.com>
This helps prevent mistakes like freeing out of order in cleanup functions
and forgetting to free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
---
drivers/power/supply/ds2782_battery.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/power/supply/ds2782_battery.c b/drivers/power/supply/ds2782_battery.c
index 10428d781c18b..28ad11c8f82de 100644
--- a/drivers/power/supply/ds2782_battery.c
+++ b/drivers/power/supply/ds2782_battery.c
@@ -57,7 +57,6 @@ struct ds278x_info {
struct power_supply_desc battery_desc;
const struct ds278x_battery_ops *ops;
struct delayed_work bat_work;
- int id;
int rsns;
int capacity;
int status; /* State Of Charge */
@@ -314,14 +313,11 @@ static void ds278x_power_supply_init(struct power_supply_desc *battery)
static void ds278x_battery_remove(struct i2c_client *client)
{
struct ds278x_info *info = i2c_get_clientdata(client);
- int id = info->id;
power_supply_unregister(info->battery);
cancel_delayed_work_sync(&info->bat_work);
kfree(info->battery_desc.name);
kfree(info);
-
- ida_free(&battery_id, id);
}
#ifdef CONFIG_PM_SLEEP
@@ -365,6 +361,13 @@ static const struct ds278x_battery_ops ds278x_ops[] = {
}
};
+static void ds278x_free_ida(void *data)
+{
+ int num = (uintptr_t)data;
+
+ ida_free(&battery_id, num);
+}
+
static int ds278x_battery_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
@@ -387,12 +390,13 @@ static int ds278x_battery_probe(struct i2c_client *client)
num = ida_alloc(&battery_id, GFP_KERNEL);
if (num < 0)
return num;
+ ret = devm_add_action_or_reset(&client->dev, ds278x_free_ida, (void *)(uintptr_t)num);
+ if (ret)
+ return ret;
info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info) {
- ret = -ENOMEM;
- goto fail_info;
- }
+ if (!info)
+ return -ENOMEM;
info->battery_desc.name = kasprintf(GFP_KERNEL, "%s-%d",
client->name, num);
@@ -406,7 +410,6 @@ static int ds278x_battery_probe(struct i2c_client *client)
i2c_set_clientdata(client, info);
info->client = client;
- info->id = num;
info->ops = &ds278x_ops[id->driver_data];
ds278x_power_supply_init(&info->battery_desc);
psy_cfg.drv_data = info;
@@ -432,8 +435,6 @@ static int ds278x_battery_probe(struct i2c_client *client)
kfree(info->battery_desc.name);
fail_name:
kfree(info);
-fail_info:
- ida_free(&battery_id, num);
return ret;
}
--
2.39.2
next prev parent reply other threads:[~2024-12-02 21:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-02 21:15 [PATCH 1/5] power: supply: ds2782: Switch to simpler IDA interface Andrew Davis
2024-12-02 21:15 ` Andrew Davis [this message]
2024-12-02 21:15 ` [PATCH 3/5] power: supply: ds2782: Use devm based memory allocators Andrew Davis
2024-12-02 21:15 ` [PATCH 4/5] power: supply: ds2782: Use devm_power_supply_register() helper Andrew Davis
2024-12-02 21:15 ` [PATCH 5/5] power: supply: ds2782: Use devm_delayed_work_autocancel() helper Andrew Davis
2024-12-05 1:36 ` [PATCH 1/5] power: supply: ds2782: Switch to simpler IDA interface Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241202211519.199635-2-afd@ti.com \
--to=afd@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox