[PATCH AUTOSEL 6.1 01/15] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU

[PATCH AUTOSEL 6.1 01/15] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU

[Sasha Levin]

From: Esben Haabendal <esben@geanix.com>

[ Upstream commit 58414a31c5713afb5449fd74a26a843d34cc62e8 ]

When PINCTRL_IMX_SCU was selected by PINCTRL_IMX8DXL or PINCTRL_IMX8QM
combined with COMPILE_TEST on a non-arm platforms, the IMX_SCU
dependency could not be enabled.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410031439.GyTSa0kX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410030852.q0Hukplf-lkp@intel.com/
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/20241003-imx-pinctrl-compile-test-fix-v1-1-145ca1948cc3@geanix.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/freescale/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 7a32f77792d9a..86110fc3c1465 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -9,7 +9,7 @@ config PINCTRL_IMX
 
 config PINCTRL_IMX_SCU
 	tristate
-	depends on IMX_SCU
+	depends on IMX_SCU || COMPILE_TEST
 	select PINCTRL_IMX
 
 config PINCTRL_IMX1_CORE
-- 
2.43.0

[PATCH AUTOSEL 6.1 02/15] tracing/ftrace: disable preemption in syscall probe

[Sasha Levin]

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

[ Upstream commit 13d750c2c03e9861e15268574ed2c239cca9c9d5 ]

In preparation for allowing system call enter/exit instrumentation to
handle page faults, make sure that ftrace can handle this change by
explicitly disabling preemption within the ftrace system call tracepoint
probes to respect the current expectations within ftrace ring buffer
code.

This change does not yet allow ftrace to take page faults per se within
its probe, but allows its existing probes to adapt to the upcoming
change.

Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: https://lore.kernel.org/20241009010718.2050182-3-mathieu.desnoyers@efficios.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/trace_events.h  | 36 +++++++++++++++++++++++++++++++----
 kernel/trace/trace_syscalls.c | 12 ++++++++++++
 2 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/include/trace/trace_events.h b/include/trace/trace_events.h
index c2f9cabf154d1..fa0d51cad57a8 100644
--- a/include/trace/trace_events.h
+++ b/include/trace/trace_events.h
@@ -244,6 +244,9 @@ static struct trace_event_fields trace_event_fields_##call[] = {	\
 	tstruct								\
 	{} };
 
+#undef DECLARE_EVENT_SYSCALL_CLASS
+#define DECLARE_EVENT_SYSCALL_CLASS DECLARE_EVENT_CLASS
+
 #undef DEFINE_EVENT_PRINT
 #define DEFINE_EVENT_PRINT(template, name, proto, args, print)
 
@@ -374,11 +377,11 @@ static inline notrace int trace_event_get_offsets_##call(		\
 
 #include "stages/stage6_event_callback.h"
 
-#undef DECLARE_EVENT_CLASS
-#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
-									\
+
+#undef __DECLARE_EVENT_CLASS
+#define __DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \
 static notrace void							\
-trace_event_raw_event_##call(void *__data, proto)			\
+do_trace_event_raw_event_##call(void *__data, proto)			\
 {									\
 	struct trace_event_file *trace_file = __data;			\
 	struct trace_event_data_offsets_##call __maybe_unused __data_offsets;\
@@ -403,6 +406,29 @@ trace_event_raw_event_##call(void *__data, proto)			\
 									\
 	trace_event_buffer_commit(&fbuffer);				\
 }
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+__DECLARE_EVENT_CLASS(call, PARAMS(proto), PARAMS(args), PARAMS(tstruct), \
+		      PARAMS(assign), PARAMS(print))			\
+static notrace void							\
+trace_event_raw_event_##call(void *__data, proto)			\
+{									\
+	do_trace_event_raw_event_##call(__data, args);			\
+}
+
+#undef DECLARE_EVENT_SYSCALL_CLASS
+#define DECLARE_EVENT_SYSCALL_CLASS(call, proto, args, tstruct, assign, print) \
+__DECLARE_EVENT_CLASS(call, PARAMS(proto), PARAMS(args), PARAMS(tstruct), \
+		      PARAMS(assign), PARAMS(print))			\
+static notrace void							\
+trace_event_raw_event_##call(void *__data, proto)			\
+{									\
+	preempt_disable_notrace();					\
+	do_trace_event_raw_event_##call(__data, args);			\
+	preempt_enable_notrace();					\
+}
+
 /*
  * The ftrace_test_probe is compiled out, it is only here as a build time check
  * to make sure that if the tracepoint handling changes, the ftrace probe will
@@ -418,6 +444,8 @@ static inline void ftrace_test_probe_##call(void)			\
 
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
+#undef __DECLARE_EVENT_CLASS
+
 #include "stages/stage7_class_define.h"
 
 #undef DECLARE_EVENT_CLASS
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 942ddbdace4a4..e39c5ca76eabb 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -299,6 +299,12 @@ static void ftrace_syscall_enter(void *data, struct pt_regs *regs, long id)
 	int syscall_nr;
 	int size;
 
+	/*
+	 * Syscall probe called with preemption enabled, but the ring
+	 * buffer and per-cpu data require preemption to be disabled.
+	 */
+	guard(preempt_notrace)();
+
 	syscall_nr = trace_get_syscall_nr(current, regs);
 	if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
 		return;
@@ -338,6 +344,12 @@ static void ftrace_syscall_exit(void *data, struct pt_regs *regs, long ret)
 	struct trace_event_buffer fbuffer;
 	int syscall_nr;
 
+	/*
+	 * Syscall probe called with preemption enabled, but the ring
+	 * buffer and per-cpu data require preemption to be disabled.
+	 */
+	guard(preempt_notrace)();
+
 	syscall_nr = trace_get_syscall_nr(current, regs);
 	if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
 		return;
-- 
2.43.0

[PATCH AUTOSEL 6.1 03/15] tracing: Use atomic64_inc_return() in trace_clock_counter()

[Sasha Levin]

From: Uros Bizjak <ubizjak@gmail.com>

[ Upstream commit eb887c4567d1b0e7684c026fe7df44afa96589e6 ]

Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241007085651.48544-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index 4702efb00ff21..4cb2ebc439be6 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -154,5 +154,5 @@ static atomic64_t trace_counter;
  */
 u64 notrace trace_clock_counter(void)
 {
-	return atomic64_add_return(1, &trace_counter);
+	return atomic64_inc_return(&trace_counter);
 }
-- 
2.43.0

[PATCH AUTOSEL 6.1 04/15] tools/rtla: fix collision with glibc sched_attr/sched_set_attr

[Sasha Levin]

From: Jan Stancek <jstancek@redhat.com>

[ Upstream commit 0eecee340672c4b512f6f4a8c6add26df05d130c ]

glibc commit 21571ca0d703 ("Linux: Add the sched_setattr
and sched_getattr functions") now also provides 'struct sched_attr'
and sched_setattr() which collide with the ones from rtla.

  In file included from src/trace.c:11:
  src/utils.h:49:8: error: redefinition of ‘struct sched_attr’
     49 | struct sched_attr {
        |        ^~~~~~~~~~
  In file included from /usr/include/bits/sched.h:60,
                   from /usr/include/sched.h:43,
                   from /usr/include/tracefs/tracefs.h:10,
                   from src/trace.c:4:
  /usr/include/linux/sched/types.h:98:8: note: originally defined here
     98 | struct sched_attr {
        |        ^~~~~~~~~~

Define 'struct sched_attr' conditionally, similar to what strace did:
  https://lore.kernel.org/all/20240930222913.3981407-1-raj.khem@gmail.com/
and rename rtla's version of sched_setattr() to avoid collision.

Link: https://lore.kernel.org/8088f66a7a57c1b209cd8ae0ae7c336a7f8c930d.1728572865.git.jstancek@redhat.com
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/tracing/rtla/src/utils.c | 4 ++--
 tools/tracing/rtla/src/utils.h | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/tools/tracing/rtla/src/utils.c b/tools/tracing/rtla/src/utils.c
index 8c8d63c7196cf..02194773ef12d 100644
--- a/tools/tracing/rtla/src/utils.c
+++ b/tools/tracing/rtla/src/utils.c
@@ -238,7 +238,7 @@ long parse_ns_duration(char *val)
 
 #define SCHED_DEADLINE		6
 
-static inline int sched_setattr(pid_t pid, const struct sched_attr *attr,
+static inline int syscall_sched_setattr(pid_t pid, const struct sched_attr *attr,
 				unsigned int flags) {
 	return syscall(__NR_sched_setattr, pid, attr, flags);
 }
@@ -248,7 +248,7 @@ int __set_sched_attr(int pid, struct sched_attr *attr)
 	int flags = 0;
 	int retval;
 
-	retval = sched_setattr(pid, attr, flags);
+	retval = syscall_sched_setattr(pid, attr, flags);
 	if (retval < 0) {
 		err_msg("Failed to set sched attributes to the pid %d: %s\n",
 			pid, strerror(errno));
diff --git a/tools/tracing/rtla/src/utils.h b/tools/tracing/rtla/src/utils.h
index 92da41aaf4c4c..e445ccf15e701 100644
--- a/tools/tracing/rtla/src/utils.h
+++ b/tools/tracing/rtla/src/utils.h
@@ -44,6 +44,7 @@ update_sum(unsigned long long *a, unsigned long long *b)
 	*a += *b;
 }
 
+#ifndef SCHED_ATTR_SIZE_VER0
 struct sched_attr {
 	uint32_t size;
 	uint32_t sched_policy;
@@ -54,6 +55,7 @@ struct sched_attr {
 	uint64_t sched_deadline;
 	uint64_t sched_period;
 };
+#endif /* SCHED_ATTR_SIZE_VER0 */
 
 int parse_prio(char *arg, struct sched_attr *sched_param);
 int set_comm_sched_attr(const char *comm_prefix, struct sched_attr *attr);
-- 
2.43.0

[PATCH AUTOSEL 6.1 05/15] scsi: hisi_sas: Add cond_resched() for no forced preemption model

[Sasha Levin]

From: Yihang Li <liyihang9@huawei.com>

[ Upstream commit 2233c4a0b948211743659b24c13d6bd059fa75fc ]

For no forced preemption model kernel, in the scenario where the
expander is connected to 12 high performance SAS SSDs, the following
call trace may occur:

[  214.409199][  C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211]
[  214.568533][  C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[  214.575224][  C240] pc : fput_many+0x8c/0xdc
[  214.579480][  C240] lr : fput+0x1c/0xf0
[  214.583302][  C240] sp : ffff80002de2b900
[  214.587298][  C240] x29: ffff80002de2b900 x28: ffff1082aa412000
[  214.593291][  C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000
[  214.599284][  C240] x25: ffff1062bbac5c40 x24: 0000000000001000
[  214.605277][  C240] x23: 000000000000000a x22: 0000000000000001
[  214.611270][  C240] x21: 0000000000001000 x20: 0000000000000000
[  214.617262][  C240] x19: ffff3062a41ae580 x18: 0000000000010000
[  214.623255][  C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0
[  214.629248][  C240] x15: ffffffffffffffff x14: 0000000003ffffff
[  214.635241][  C240] x13: 000000000000ffff x12: 000000000000029c
[  214.641234][  C240] x11: 0000000000000006 x10: ffff80003a9f7fd0
[  214.647226][  C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001
[  214.653219][  C240] x7 : 0000000000000002 x6 : 0000000000000080
[  214.659212][  C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554
[  214.665205][  C240] x3 : 0000000000000002 x2 : 0000000000000020
[  214.671198][  C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8
[  214.677191][  C240] Call trace:
[  214.680320][  C240]  fput_many+0x8c/0xdc
[  214.684230][  C240]  fput+0x1c/0xf0
[  214.687707][  C240]  aio_complete_rw+0xd8/0x1fc
[  214.692225][  C240]  blkdev_bio_end_io+0x98/0x140
[  214.696917][  C240]  bio_endio+0x160/0x1bc
[  214.701001][  C240]  blk_update_request+0x1c8/0x3bc
[  214.705867][  C240]  scsi_end_request+0x3c/0x1f0
[  214.710471][  C240]  scsi_io_completion+0x7c/0x1a0
[  214.715249][  C240]  scsi_finish_command+0x104/0x140
[  214.720200][  C240]  scsi_softirq_done+0x90/0x180
[  214.724892][  C240]  blk_mq_complete_request+0x5c/0x70
[  214.730016][  C240]  scsi_mq_done+0x48/0xac
[  214.734194][  C240]  sas_scsi_task_done+0xbc/0x16c [libsas]
[  214.739758][  C240]  slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw]
[  214.746185][  C240]  cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw]
[  214.752179][  C240]  irq_thread_fn+0x34/0xa4
[  214.756435][  C240]  irq_thread+0xc4/0x130
[  214.760520][  C240]  kthread+0x108/0x13c
[  214.764430][  C240]  ret_from_fork+0x10/0x18

This is because in the hisi_sas driver, both the hardware interrupt
handler and the interrupt thread are executed on the same CPU. In the
performance test scenario, function irq_wait_for_interrupt() will always
return 0 if lots of interrupts occurs and the CPU will be continuously
consumed. As a result, the CPU cannot run the watchdog thread. When the
watchdog time exceeds the specified time, call trace occurs.

To fix it, add cond_resched() to execute the watchdog thread.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://lore.kernel.org/r/20241008021822.2617339-8-liyihang9@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 7ae56a2fe2325..05dcd925a3fab 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2410,6 +2410,7 @@ static irqreturn_t  cq_thread_v3_hw(int irq_no, void *p)
 	/* update rd_point */
 	cq->rd_point = rd_point;
 	hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
+	cond_resched();
 
 	return IRQ_HANDLED;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.1 06/15] scsi: ufs: core: Make DMA mask configuration more flexible

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 78bc671bd1501e2f6c571e063301a4fdc5db53b2 ]

Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with
ufs_hba_variant_ops::set_dma_mask.  Update the Renesas driver
accordingly.  This patch enables supporting other configurations than
32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/core/ufshcd.c      | 4 ++--
 drivers/ufs/host/ufs-renesas.c | 9 ++++++++-
 include/ufs/ufshcd.h           | 9 +++------
 3 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index a1809aa9a8892..df94c563b808a 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -2230,8 +2230,6 @@ static inline int ufshcd_hba_capabilities(struct ufs_hba *hba)
 	int err;
 
 	hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES);
-	if (hba->quirks & UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS)
-		hba->capabilities &= ~MASK_64_ADDRESSING_SUPPORT;
 
 	/* nutrs and nutmrs are 0 based values */
 	hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1;
@@ -9648,6 +9646,8 @@ EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
  */
 static int ufshcd_set_dma_mask(struct ufs_hba *hba)
 {
+	if (hba->vops && hba->vops->set_dma_mask)
+		return hba->vops->set_dma_mask(hba);
 	if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) {
 		if (!dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(64)))
 			return 0;
diff --git a/drivers/ufs/host/ufs-renesas.c b/drivers/ufs/host/ufs-renesas.c
index ab0652d8705ac..481ad0a3a6c7c 100644
--- a/drivers/ufs/host/ufs-renesas.c
+++ b/drivers/ufs/host/ufs-renesas.c
@@ -7,6 +7,7 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -364,14 +365,20 @@ static int ufs_renesas_init(struct ufs_hba *hba)
 		return -ENOMEM;
 	ufshcd_set_variant(hba, priv);
 
-	hba->quirks |= UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS | UFSHCD_QUIRK_HIBERN_FASTAUTO;
+	hba->quirks |= UFSHCD_QUIRK_HIBERN_FASTAUTO;
 
 	return 0;
 }
 
+static int ufs_renesas_set_dma_mask(struct ufs_hba *hba)
+{
+	return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32));
+}
+
 static const struct ufs_hba_variant_ops ufs_renesas_vops = {
 	.name		= "renesas",
 	.init		= ufs_renesas_init,
+	.set_dma_mask	= ufs_renesas_set_dma_mask,
 	.setup_clocks	= ufs_renesas_setup_clocks,
 	.hce_enable_notify = ufs_renesas_hce_enable_notify,
 	.dbg_register_dump = ufs_renesas_dbg_register_dump,
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index b54f22840dabf..c4b1e6dca2397 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -272,6 +272,8 @@ struct ufs_pwr_mode_info {
  * @name: variant name
  * @init: called when the driver is initialized
  * @exit: called to cleanup everything done in init
+ * @set_dma_mask: For setting another DMA mask than indicated by the 64AS
+ *	capability bit.
  * @get_ufs_hci_version: called to get UFS HCI version
  * @clk_scale_notify: notifies that clks are scaled up/down
  * @setup_clocks: called before touching any of the controller registers
@@ -303,6 +305,7 @@ struct ufs_hba_variant_ops {
 	int	(*init)(struct ufs_hba *);
 	void    (*exit)(struct ufs_hba *);
 	u32	(*get_ufs_hci_version)(struct ufs_hba *);
+	int	(*set_dma_mask)(struct ufs_hba *);
 	int	(*clk_scale_notify)(struct ufs_hba *, bool,
 				    enum ufs_notify_change_status);
 	int	(*setup_clocks)(struct ufs_hba *, bool,
@@ -582,12 +585,6 @@ enum ufshcd_quirks {
 	 */
 	UFSHCD_QUIRK_SKIP_PH_CONFIGURATION		= 1 << 16,
 
-	/*
-	 * This quirk needs to be enabled if the host controller has
-	 * 64-bit addressing supported capability but it doesn't work.
-	 */
-	UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS		= 1 << 17,
-
 	/*
 	 * This quirk needs to be enabled if the host controller has
 	 * auto-hibernate capability but it's FASTAUTO only.
-- 
2.43.0

[PATCH AUTOSEL 6.1 07/15] mfd: axp20x: Allow multiple regulators

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit e37ec32188701efa01455b9be42a392adab06ce4 ]

At the moment trying to register a second AXP chip makes the probe fail,
as some sysfs registration fails due to a duplicate name:

...
[    3.688215] axp20x-i2c 0-0035: AXP20X driver loaded
[    3.695610] axp20x-i2c 0-0036: AXP20x variant AXP323 found
[    3.706151] sysfs: cannot create duplicate filename '/bus/platform/devices/axp20x-regulator'
[    3.714718] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc1-00026-g50bf2e2c079d-dirty #192
[    3.724020] Hardware name: Avaota A1 (DT)
[    3.728029] Call trace:
[    3.730477]  dump_backtrace+0x94/0xec
[    3.734146]  show_stack+0x18/0x24
[    3.737462]  dump_stack_lvl+0x80/0xf4
[    3.741128]  dump_stack+0x18/0x24
[    3.744444]  sysfs_warn_dup+0x64/0x80
[    3.748109]  sysfs_do_create_link_sd+0xf0/0xf8
[    3.752553]  sysfs_create_link+0x20/0x40
[    3.756476]  bus_add_device+0x64/0x104
[    3.760229]  device_add+0x310/0x760
[    3.763717]  platform_device_add+0x10c/0x238
[    3.767990]  mfd_add_device+0x4ec/0x5c8
[    3.771829]  mfd_add_devices+0x88/0x11c
[    3.775666]  axp20x_device_probe+0x70/0x184
[    3.779851]  axp20x_i2c_probe+0x9c/0xd8
...

This is because we use PLATFORM_DEVID_NONE for the mfd_add_devices()
call, which would number the child devices in the same 0-based way, even
for the second (or any other) instance.

Use PLATFORM_DEVID_AUTO instead, which automatically assigns
non-conflicting device numbers.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-4-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/axp20x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 880c41fa7021b..3c2582bc2d923 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -1000,7 +1000,7 @@ int axp20x_device_probe(struct axp20x_dev *axp20x)
 		}
 	}
 
-	ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
+	ret = mfd_add_devices(axp20x->dev, PLATFORM_DEVID_AUTO, axp20x->cells,
 			      axp20x->nr_cells, NULL, 0, NULL);
 
 	if (ret) {
-- 
2.43.0

[PATCH AUTOSEL 6.1 08/15] leds: class: Protect brightness_show() with led_cdev->led_access mutex

[Sasha Levin]

From: Mukesh Ojha <quic_mojha@quicinc.com>

[ Upstream commit 4ca7cd938725a4050dcd62ae9472e931d603118d ]

There is NULL pointer issue observed if from Process A where hid device
being added which results in adding a led_cdev addition and later a
another call to access of led_cdev attribute from Process B can result
in NULL pointer issue.

Use mutex led_cdev->led_access to protect access to led->cdev and its
attribute inside brightness_show() and max_brightness_show() and also
update the comment for mutex that it should be used to protect the led
class device fields.

	Process A 				Process B

 kthread+0x114
 worker_thread+0x244
 process_scheduled_works+0x248
 uhid_device_add_worker+0x24
 hid_add_device+0x120
 device_add+0x268
 bus_probe_device+0x94
 device_initial_probe+0x14
 __device_attach+0xfc
 bus_for_each_drv+0x10c
 __device_attach_driver+0x14c
 driver_probe_device+0x3c
 __driver_probe_device+0xa0
 really_probe+0x190
 hid_device_probe+0x130
 ps_probe+0x990
 ps_led_register+0x94
 devm_led_classdev_register_ext+0x58
 led_classdev_register_ext+0x1f8
 device_create_with_groups+0x48
 device_create_groups_vargs+0xc8
 device_add+0x244
 kobject_uevent+0x14
 kobject_uevent_env[jt]+0x224
 mutex_unlock[jt]+0xc4
 __mutex_unlock_slowpath+0xd4
 wake_up_q+0x70
 try_to_wake_up[jt]+0x48c
 preempt_schedule_common+0x28
 __schedule+0x628
 __switch_to+0x174
						el0t_64_sync+0x1a8/0x1ac
						el0t_64_sync_handler+0x68/0xbc
						el0_svc+0x38/0x68
						do_el0_svc+0x1c/0x28
						el0_svc_common+0x80/0xe0
						invoke_syscall+0x58/0x114
						__arm64_sys_read+0x1c/0x2c
						ksys_read+0x78/0xe8
						vfs_read+0x1e0/0x2c8
						kernfs_fop_read_iter+0x68/0x1b4
						seq_read_iter+0x158/0x4ec
						kernfs_seq_show+0x44/0x54
						sysfs_kf_seq_show+0xb4/0x130
						dev_attr_show+0x38/0x74
						brightness_show+0x20/0x4c
						dualshock4_led_get_brightness+0xc/0x74

[ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
[ 3313.874301][ T4013] Mem abort info:
[ 3313.874303][ T4013]   ESR = 0x0000000096000006
[ 3313.874305][ T4013]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 3313.874307][ T4013]   SET = 0, FnV = 0
[ 3313.874309][ T4013]   EA = 0, S1PTW = 0
[ 3313.874311][ T4013]   FSC = 0x06: level 2 translation fault
[ 3313.874313][ T4013] Data abort info:
[ 3313.874314][ T4013]   ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 3313.874316][ T4013]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 3313.874318][ T4013]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000
..

[ 3313.874332][ T4013] Dumping ftrace buffer:
[ 3313.874334][ T4013]    (ftrace buffer empty)
..
..
[ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader
[ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74
[ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60
[ 3313.874656][ T4013] sp : ffffffc0b910bbd0
..
..
[ 3313.874685][ T4013] Call trace:
[ 3313.874687][ T4013]  dualshock4_led_get_brightness+0xc/0x74
[ 3313.874690][ T4013]  brightness_show+0x20/0x4c
[ 3313.874692][ T4013]  dev_attr_show+0x38/0x74
[ 3313.874696][ T4013]  sysfs_kf_seq_show+0xb4/0x130
[ 3313.874700][ T4013]  kernfs_seq_show+0x44/0x54
[ 3313.874703][ T4013]  seq_read_iter+0x158/0x4ec
[ 3313.874705][ T4013]  kernfs_fop_read_iter+0x68/0x1b4
[ 3313.874708][ T4013]  vfs_read+0x1e0/0x2c8
[ 3313.874711][ T4013]  ksys_read+0x78/0xe8
[ 3313.874714][ T4013]  __arm64_sys_read+0x1c/0x2c
[ 3313.874718][ T4013]  invoke_syscall+0x58/0x114
[ 3313.874721][ T4013]  el0_svc_common+0x80/0xe0
[ 3313.874724][ T4013]  do_el0_svc+0x1c/0x28
[ 3313.874727][ T4013]  el0_svc+0x38/0x68
[ 3313.874730][ T4013]  el0t_64_sync_handler+0x68/0xbc
[ 3313.874732][ T4013]  el0t_64_sync+0x1a8/0x1ac

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Anish Kumar <yesanishhere@gmail.com>
Link: https://lore.kernel.org/r/20241103160527.82487-1-quic_mojha@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/led-class.c | 14 +++++++++++---
 include/linux/leds.h     |  2 +-
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 7391d2cf1370a..93fdca5c7dc5d 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -28,11 +28,14 @@ static ssize_t brightness_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	unsigned int brightness;
 
-	/* no lock needed for this */
+	mutex_lock(&led_cdev->led_access);
 	led_update_brightness(led_cdev);
+	brightness = led_cdev->brightness;
+	mutex_unlock(&led_cdev->led_access);
 
-	return sprintf(buf, "%u\n", led_cdev->brightness);
+	return sprintf(buf, "%u\n", brightness);
 }
 
 static ssize_t brightness_store(struct device *dev,
@@ -69,8 +72,13 @@ static ssize_t max_brightness_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	unsigned int max_brightness;
+
+	mutex_lock(&led_cdev->led_access);
+	max_brightness = led_cdev->max_brightness;
+	mutex_unlock(&led_cdev->led_access);
 
-	return sprintf(buf, "%u\n", led_cdev->max_brightness);
+	return sprintf(buf, "%u\n", max_brightness);
 }
 static DEVICE_ATTR_RO(max_brightness);
 
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 79ab2dfd3c72f..01fccb1c50010 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -161,7 +161,7 @@ struct led_classdev {
 	struct kernfs_node	*brightness_hw_changed_kn;
 #endif
 
-	/* Ensures consistent access to the LED Flash Class device */
+	/* Ensures consistent access to the LED class device */
 	struct mutex		led_access;
 };
 
-- 
2.43.0

[PATCH AUTOSEL 6.1 09/15] scsi: st: Don't modify unknown block number in MTIOCGET

[Sasha Levin]

From: Kai Mäkisara <Kai.Makisara@kolumbus.fi>

[ Upstream commit 5bb2d6179d1a8039236237e1e94cfbda3be1ed9e ]

Struct mtget field mt_blkno -1 means it is unknown. Don't add anything to
it.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219419#c14
Link: https://lore.kernel.org/r/20241106095723.63254-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/st.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index b90a440e135dc..b91da7b51814a 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3754,7 +3754,7 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
 		    ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
 		mt_status.mt_blkno = STps->drv_block;
 		mt_status.mt_fileno = STps->drv_file;
-		if (STp->block_size != 0) {
+		if (STp->block_size != 0 && mt_status.mt_blkno >= 0) {
 			if (STps->rw == ST_WRITING)
 				mt_status.mt_blkno +=
 				    (STp->buffer)->buffer_bytes / STp->block_size;
-- 
2.43.0

[PATCH AUTOSEL 6.1 10/15] scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset

[Sasha Levin]

From: Kai Mäkisara <Kai.Makisara@kolumbus.fi>

[ Upstream commit 0b120edb37dc9dd8ca82893d386922eb6b16f860 ]

Most drives rewind the tape when the device is reset. Reading and writing
are not allowed until something is done to make the tape position match the
user's expectation (e.g., rewind the tape). Add MTIOCGET and MTLOAD to
operations allowed after reset. MTIOCGET is modified to not touch the tape
if pos_unknown is non-zero. The tape location is known after MTLOAD.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219419#c14
Link: https://lore.kernel.org/r/20241106095723.63254-3-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/st.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index b91da7b51814a..b3caa3b9722d1 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3504,6 +3504,7 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
 	int i, cmd_nr, cmd_type, bt;
 	int retval = 0;
 	unsigned int blk;
+	bool cmd_mtiocget;
 	struct scsi_tape *STp = file->private_data;
 	struct st_modedef *STm;
 	struct st_partstat *STps;
@@ -3617,6 +3618,7 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
 			 */
 			if (mtc.mt_op != MTREW &&
 			    mtc.mt_op != MTOFFL &&
+			    mtc.mt_op != MTLOAD &&
 			    mtc.mt_op != MTRETEN &&
 			    mtc.mt_op != MTERASE &&
 			    mtc.mt_op != MTSEEK &&
@@ -3730,17 +3732,28 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
 		goto out;
 	}
 
+	cmd_mtiocget = cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET);
+
 	if ((i = flush_buffer(STp, 0)) < 0) {
-		retval = i;
-		goto out;
-	}
-	if (STp->can_partitions &&
-	    (i = switch_partition(STp)) < 0) {
-		retval = i;
-		goto out;
+		if (cmd_mtiocget && STp->pos_unknown) {
+			/* flush fails -> modify status accordingly */
+			reset_state(STp);
+			STp->pos_unknown = 1;
+		} else { /* return error */
+			retval = i;
+			goto out;
+		}
+	} else { /* flush_buffer succeeds */
+		if (STp->can_partitions) {
+			i = switch_partition(STp);
+			if (i < 0) {
+				retval = i;
+				goto out;
+			}
+		}
 	}
 
-	if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
+	if (cmd_mtiocget) {
 		struct mtget mt_status;
 
 		if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
-- 
2.43.0

[PATCH AUTOSEL 6.1 11/15] pinctrl: qcom-pmic-gpio: add support for PM8937

[Sasha Levin]

From: Barnabás Czémán <barnabas.czeman@mainlining.org>

[ Upstream commit 89265a58ff24e3885c2c9ca722bc3aaa47018be9 ]

PM8937 has 8 GPIO-s with holes on GPIO3, GPIO4 and GPIO6.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-2-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 6d43c2123e69a..6c3da790c7901 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1219,6 +1219,8 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 },
 	{ .compatible = "qcom,pm8450-gpio", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
+	/* pm8937 has 8 GPIOs with holes on 3, 4 and 6 */
+	{ .compatible = "qcom,pm8937-gpio", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
 	/* pm8950 has 8 GPIOs with holes on 3 */
 	{ .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
-- 
2.43.0

[PATCH AUTOSEL 6.1 12/15] pinctrl: qcom: spmi-mpp: Add PM8937 compatible

[Sasha Levin]

From: Barnabás Czémán <barnabas.czeman@mainlining.org>

[ Upstream commit f755261190e88f5d19fe0a3b762f0bbaff6bd438 ]

The PM8937 provides 4 MPPs.
Add a compatible to support them.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-4-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 6937157f50b3c..148cc107b7aff 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -964,6 +964,7 @@ static const struct of_device_id pmic_mpp_of_match[] = {
 	{ .compatible = "qcom,pm8226-mpp", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8841-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8916-mpp", .data = (void *) 4 },
+	{ .compatible = "qcom,pm8937-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8941-mpp", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8950-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pmi8950-mpp", .data = (void *) 4 },
-- 
2.43.0

[PATCH AUTOSEL 6.1 13/15] nvdimm: rectify the illogical code within nd_dax_probe()

[Sasha Levin]

From: Yi Yang <yiyang13@huawei.com>

[ Upstream commit b61352101470f8b68c98af674e187cfaa7c43504 ]

When nd_dax is NULL, nd_pfn is consequently NULL as well. Nevertheless,
it is inadvisable to perform pointer arithmetic or address-taking on a
NULL pointer.
Introduce the nd_dax_devinit() function to enhance the code's logic and
improve its readability.

Signed-off-by: Yi Yang <yiyang13@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20241108085526.527957-1-yiyang13@huawei.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/dax_devs.c | 4 ++--
 drivers/nvdimm/nd.h       | 7 +++++++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/nvdimm/dax_devs.c b/drivers/nvdimm/dax_devs.c
index 7f4a9d28b6702..5cafca6ba1da3 100644
--- a/drivers/nvdimm/dax_devs.c
+++ b/drivers/nvdimm/dax_devs.c
@@ -106,12 +106,12 @@ int nd_dax_probe(struct device *dev, struct nd_namespace_common *ndns)
 
 	nvdimm_bus_lock(&ndns->dev);
 	nd_dax = nd_dax_alloc(nd_region);
-	nd_pfn = &nd_dax->nd_pfn;
-	dax_dev = nd_pfn_devinit(nd_pfn, ndns);
+	dax_dev = nd_dax_devinit(nd_dax, ndns);
 	nvdimm_bus_unlock(&ndns->dev);
 	if (!dax_dev)
 		return -ENOMEM;
 	pfn_sb = devm_kmalloc(dev, sizeof(*pfn_sb), GFP_KERNEL);
+	nd_pfn = &nd_dax->nd_pfn;
 	nd_pfn->pfn_sb = pfn_sb;
 	rc = nd_pfn_validate(nd_pfn, DAX_SIG);
 	dev_dbg(dev, "dax: %s\n", rc == 0 ? dev_name(dax_dev) : "<none>");
diff --git a/drivers/nvdimm/nd.h b/drivers/nvdimm/nd.h
index ec5219680092d..cce728f5409d6 100644
--- a/drivers/nvdimm/nd.h
+++ b/drivers/nvdimm/nd.h
@@ -601,6 +601,13 @@ struct nd_dax *to_nd_dax(struct device *dev);
 int nd_dax_probe(struct device *dev, struct nd_namespace_common *ndns);
 bool is_nd_dax(struct device *dev);
 struct device *nd_dax_create(struct nd_region *nd_region);
+static inline struct device *nd_dax_devinit(struct nd_dax *nd_dax,
+					    struct nd_namespace_common *ndns)
+{
+	if (!nd_dax)
+		return NULL;
+	return nd_pfn_devinit(&nd_dax->nd_pfn, ndns);
+}
 #else
 static inline int nd_dax_probe(struct device *dev,
 		struct nd_namespace_common *ndns)
-- 
2.43.0

[PATCH AUTOSEL 6.1 14/15] smb: client: memcpy() with surrounding object base address

[Sasha Levin]

From: Kees Cook <kees@kernel.org>

[ Upstream commit f69b0187f8745a7a9584f6b13f5e792594b88b2e ]

Like commit f1f047bd7ce0 ("smb: client: Fix -Wstringop-overflow issues"),
adjust the memcpy() destination address to be based off the surrounding
object rather than based off the 4-byte "Protocol" member. This avoids a
build-time warning when compiling under CONFIG_FORTIFY_SOURCE with GCC 15:

In function 'fortify_memcpy_chk',
    inlined from 'CIFSSMBSetPathInfo' at ../fs/smb/client/cifssmb.c:5358:2:
../include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  571 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/cifssmb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c
index 67c5fc2b2db94..6077fe1dcc9ce 100644
--- a/fs/smb/client/cifssmb.c
+++ b/fs/smb/client/cifssmb.c
@@ -5349,7 +5349,7 @@ CIFSSMBSetPathInfo(const unsigned int xid, struct cifs_tcon *tcon,
 	param_offset = offsetof(struct smb_com_transaction2_spi_req,
 				InformationLevel) - 4;
 	offset = param_offset + params;
-	data_offset = (char *) (&pSMB->hdr.Protocol) + offset;
+	data_offset = (char *)pSMB + offsetof(typeof(*pSMB), hdr.Protocol) + offset;
 	pSMB->ParameterOffset = cpu_to_le16(param_offset);
 	pSMB->DataOffset = cpu_to_le16(offset);
 	pSMB->SetupCount = 1;
-- 
2.43.0

[PATCH AUTOSEL 6.1 15/15] verification/dot2: Improve dot parser robustness

[Sasha Levin]

From: Gabriele Monaco <gmonaco@redhat.com>

[ Upstream commit 571f8b3f866a6d990a50fe5c89fe0ea78784d70b ]

This patch makes the dot parser used by dot2c and dot2k slightly more
robust, namely:
* allows parsing files with the gv extension (GraphViz)
* correctly parses edges with any indentation
    * used to work only with a single character (e.g. '\t')
Additionally it fixes a couple of warnings reported by pylint such as
wrong indentation and comparison to False instead of `not ...`

Link: https://lore.kernel.org/20241017064238.41394-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/verification/dot2/automata.py | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/tools/verification/dot2/automata.py b/tools/verification/dot2/automata.py
index baffeb960ff0b..bdeb98baa8b06 100644
--- a/tools/verification/dot2/automata.py
+++ b/tools/verification/dot2/automata.py
@@ -29,11 +29,11 @@ class Automata:
 
     def __get_model_name(self):
         basename = ntpath.basename(self.__dot_path)
-        if basename.endswith(".dot") == False:
+        if not basename.endswith(".dot") and not basename.endswith(".gv"):
             print("not a dot file")
             raise Exception("not a dot file: %s" % self.__dot_path)
 
-        model_name = basename[0:-4]
+        model_name = ntpath.splitext(basename)[0]
         if model_name.__len__() == 0:
             raise Exception("not a dot file: %s" % self.__dot_path)
 
@@ -68,9 +68,9 @@ class Automata:
     def __get_cursor_begin_events(self):
         cursor = 0
         while self.__dot_lines[cursor].split()[0] != "{node":
-           cursor += 1
+            cursor += 1
         while self.__dot_lines[cursor].split()[0] == "{node":
-           cursor += 1
+            cursor += 1
         # skip initial state transition
         cursor += 1
         return cursor
@@ -94,11 +94,11 @@ class Automata:
                 initial_state = state[7:]
             else:
                 states.append(state)
-                if self.__dot_lines[cursor].__contains__("doublecircle") == True:
+                if "doublecircle" in self.__dot_lines[cursor]:
                     final_states.append(state)
                     has_final_states = True
 
-                if self.__dot_lines[cursor].__contains__("ellipse") == True:
+                if "ellipse" in self.__dot_lines[cursor]:
                     final_states.append(state)
                     has_final_states = True
 
@@ -110,7 +110,7 @@ class Automata:
         # Insert the initial state at the bein og the states
         states.insert(0, initial_state)
 
-        if has_final_states == False:
+        if not has_final_states:
             final_states.append(initial_state)
 
         return states, initial_state, final_states
@@ -120,7 +120,7 @@ class Automata:
         cursor = self.__get_cursor_begin_events()
 
         events = []
-        while self.__dot_lines[cursor][1] == '"':
+        while self.__dot_lines[cursor].lstrip()[0] == '"':
             # transitions have the format:
             # "all_fired" -> "both_fired" [ label = "disable_irq" ];
             #  ------------ event is here ------------^^^^^
@@ -161,7 +161,7 @@ class Automata:
         # and we are back! Let's fill the matrix
         cursor = self.__get_cursor_begin_events()
 
-        while self.__dot_lines[cursor][1] == '"':
+        while self.__dot_lines[cursor].lstrip()[0] == '"':
             if self.__dot_lines[cursor].split()[1] == "->":
                 line = self.__dot_lines[cursor].split()
                 origin_state = line[0].replace('"','').replace(',','_')
-- 
2.43.0