From: Kurt Borja <kuurtb@gmail.com>
To: kuurtb@gmail.com
Cc: Dell.Client.Kernel@dell.com, hdegoede@redhat.com,
ilpo.jarvinen@linux.intel.com, linux-kernel@vger.kernel.org,
mario.limonciello@amd.com, platform-driver-x86@vger.kernel.org,
w_armin@gmx.de
Subject: [RFC PATCH 12/21] alienware-wmi: Refactor hdmi, amplifier, deepslp
Date: Wed, 4 Dec 2024 21:43:35 -0300 [thread overview]
Message-ID: <20241205004334.2185959-2-kuurtb@gmail.com> (raw)
In-Reply-To: <20241205002733.2183537-3-kuurtb@gmail.com>
Refactor show/store methods for hdmi, amplifier, deepslp sysfs groups to
use alienware_wmi_command() instead of alienware_wmax_command() which
uses deprecated WMI methods.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
drivers/platform/x86/dell/alienware-wmi.c | 51 ++++++++++++++++-------
1 file changed, 36 insertions(+), 15 deletions(-)
diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 93287bbffb97..8a21342cabd6 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -682,14 +682,18 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
static ssize_t show_hdmi_cable(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct alienfx_platdata *pdata;
acpi_status status;
u32 out_data;
struct wmax_basic_args in_args = {
.arg = 0,
};
- status =
- alienware_wmax_command(&in_args, sizeof(in_args),
- WMAX_METHOD_HDMI_CABLE, &out_data);
+
+ pdata = dev_get_platdata(dev);
+
+ status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
+ &in_args, sizeof(in_args), &out_data);
+
if (ACPI_SUCCESS(status)) {
if (out_data == 0)
return sysfs_emit(buf, "[unconnected] connected unknown\n");
@@ -703,14 +707,17 @@ static ssize_t show_hdmi_cable(struct device *dev,
static ssize_t show_hdmi_source(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct alienfx_platdata *pdata;
acpi_status status;
u32 out_data;
struct wmax_basic_args in_args = {
.arg = 0,
};
- status =
- alienware_wmax_command(&in_args, sizeof(in_args),
- WMAX_METHOD_HDMI_STATUS, &out_data);
+
+ pdata = dev_get_platdata(dev);
+
+ status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
+ &in_args, sizeof(in_args), &out_data);
if (ACPI_SUCCESS(status)) {
if (out_data == 1)
@@ -726,8 +733,12 @@ static ssize_t toggle_hdmi_source(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct alienfx_platdata *pdata;
acpi_status status;
struct wmax_basic_args args;
+
+ pdata = dev_get_platdata(dev);
+
if (strcmp(buf, "gpu\n") == 0)
args.arg = 1;
else if (strcmp(buf, "input\n") == 0)
@@ -736,8 +747,8 @@ static ssize_t toggle_hdmi_source(struct device *dev,
args.arg = 3;
pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
- status = alienware_wmax_command(&args, sizeof(args),
- WMAX_METHOD_HDMI_SOURCE, NULL);
+ status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE,
+ &args, sizeof(args), NULL);
if (ACPI_FAILURE(status))
pr_err("alienware-wmi: HDMI toggle failed: results: %u\n",
@@ -775,14 +786,17 @@ static const struct attribute_group hdmi_attribute_group = {
static ssize_t show_amplifier_status(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct alienfx_platdata *pdata;
acpi_status status;
u32 out_data;
struct wmax_basic_args in_args = {
.arg = 0,
};
- status =
- alienware_wmax_command(&in_args, sizeof(in_args),
- WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
+
+ pdata = dev_get_platdata(dev);
+
+ status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
+ &in_args, sizeof(in_args), &out_data);
if (ACPI_SUCCESS(status)) {
if (out_data == 0)
return sysfs_emit(buf, "[unconnected] connected unknown\n");
@@ -819,13 +833,17 @@ static const struct attribute_group amplifier_attribute_group = {
static ssize_t show_deepsleep_status(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct alienfx_platdata *pdata;
acpi_status status;
u32 out_data;
struct wmax_basic_args in_args = {
.arg = 0,
};
- status = alienware_wmax_command(&in_args, sizeof(in_args),
- WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
+
+ pdata = dev_get_platdata(dev);
+
+ status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
+ &in_args, sizeof(in_args), &out_data);
if (ACPI_SUCCESS(status)) {
if (out_data == 0)
return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
@@ -842,9 +860,12 @@ static ssize_t toggle_deepsleep(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct alienfx_platdata *pdata;
acpi_status status;
struct wmax_basic_args args;
+ pdata = dev_get_platdata(dev);
+
if (strcmp(buf, "disabled\n") == 0)
args.arg = 0;
else if (strcmp(buf, "s5\n") == 0)
@@ -853,8 +874,8 @@ static ssize_t toggle_deepsleep(struct device *dev,
args.arg = 2;
pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
- status = alienware_wmax_command(&args, sizeof(args),
- WMAX_METHOD_DEEP_SLEEP_CONTROL, NULL);
+ status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
+ &args, sizeof(args), NULL);
if (ACPI_FAILURE(status))
pr_err("alienware-wmi: deep sleep control failed: results: %u\n",
--
2.47.1
next prev parent reply other threads:[~2024-12-05 0:44 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-05 0:27 [RFC PATCH 00/21] alienware-wmi driver rework Kurt Borja
2024-12-05 0:38 ` [RFC PATCH 01/21] alienware-wmi: Modify parse_rgb() signature Kurt Borja
2024-12-05 0:38 ` [RFC PATCH 02/21] alienware-wmi: Move Lighting Control State Kurt Borja
2024-12-05 0:39 ` [RFC PATCH 03/21] alienware-wmi: Remove unnecessary check at module exit Kurt Borja
2024-12-05 0:39 ` [RFC PATCH 04/21] alienware-wmi: Improve sysfs groups creation Kurt Borja
2024-12-05 0:40 ` [RFC PATCH 05/21] alienware-wmi: Refactor rgb-zones sysfs group creation Kurt Borja
2024-12-05 10:17 ` Ilpo Järvinen
2024-12-05 12:48 ` Kurt Borja
2024-12-05 13:18 ` Ilpo Järvinen
2024-12-05 13:34 ` Kurt Borja
2024-12-05 0:40 ` [RFC PATCH 06/21] alienware-wmi: Add state container and alienfx_probe() Kurt Borja
2024-12-05 0:40 ` [RFC PATCH 07/21] alienware-wmi: Migrate to state container pattern Kurt Borja
2024-12-05 0:41 ` [RFC PATCH 08/21] alienware-wmi: Add WMI Drivers Kurt Borja
2024-12-05 0:41 ` [RFC PATCH 09/21] alienware-wmi: Initialize WMI drivers Kurt Borja
2024-12-05 0:42 ` [RFC PATCH 10/21] alienware-wmi: Add alienfx OPs to platdata Kurt Borja
2024-12-05 11:05 ` Ilpo Järvinen
2024-12-05 12:50 ` Kurt Borja
2024-12-05 0:43 ` [RFC PATCH 11/21] alienware-wmi: Refactor LED control methods Kurt Borja
2024-12-05 0:43 ` Kurt Borja [this message]
2024-12-05 0:44 ` [RFC PATCH 13/21] alienware-wmi: Add a state container for AWCC Kurt Borja
2024-12-05 0:44 ` [RFC PATCH 14/21] alienware-wmi: Migrate thermal methods to wmidev Kurt Borja
2024-12-05 0:44 ` [RFC PATCH 15/21] alienware-wmi: Refactor sysfs visibility methods Kurt Borja
2024-12-05 0:45 ` [RFC PATCH 16/21] alienware-wmi: Make running control state part of platdata Kurt Borja
2024-12-05 11:32 ` Ilpo Järvinen
2024-12-05 13:10 ` Kurt Borja
2024-12-05 14:06 ` Ilpo Järvinen
2024-12-07 2:10 ` Kurt Borja
2024-12-05 0:46 ` [RFC PATCH 17/21] alienware-wmi: Drop thermal methods dependency on quirks Kurt Borja
2024-12-05 11:14 ` Ilpo Järvinen
2024-12-05 12:56 ` Kurt Borja
2024-12-05 0:46 ` [RFC PATCH 18/21] platform-x86: Add header file for alienware-wmi Kurt Borja
2024-12-05 0:47 ` [RFC PATCH 19/21] platform-x86: Rename alienare-wmi Kurt Borja
2024-12-05 11:16 ` Ilpo Järvinen
2024-12-05 12:57 ` Kurt Borja
2024-12-05 0:47 ` [RFC PATCH 20/21] platform-x86: Split the alienware-wmi module Kurt Borja
2024-12-05 0:48 ` [RFC PATCH 21/21] platform-x86: Add config entries to alienware-wmi Kurt Borja
2024-12-06 23:26 ` [RFC PATCH 00/21] alienware-wmi driver rework Armin Wolf
2024-12-07 1:59 ` Kurt Borja
2024-12-07 3:20 ` Armin Wolf
2024-12-07 3:47 ` Kurt Borja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241205004334.2185959-2-kuurtb@gmail.com \
--to=kuurtb@gmail.com \
--cc=Dell.Client.Kernel@dell.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=w_armin@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox