[PATCH v8 10/14] arm64: dts: qcom: sdm845-starqltechn: add display PMIC

[Dzmitry Sankouski <dsankouski@gmail.com>]

Add support for s2dos05 display / touchscreen PMIC

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v7:
- move i2c21 node before gpio-keys

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
- refactor: 'i' < 'm', so put tlmm i2c node before motor*

Changes in v5:
- simplify regulator names
- remove single buck index
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 7ed5aa23ba71..c4d8d7c0bf36 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -40,6 +40,9 @@ framebuffer: framebuffer@9d400000 {
 			height = <2960>;
 			stride = <(1440 * 4)>;
 			format = "a8r8g8b8";
+			vci-supply = <&s2dos05_ldo4>;
+			vddr-supply = <&s2dos05_buck>;
+			vdd3-supply = <&s2dos05_ldo1>;
 		};
 	};
 
@@ -96,6 +99,66 @@ memory@a1300000 {
 		};
 	};
 
+	i2c21 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@60 {
+			compatible = "samsung,s2dos05";
+			reg = <0x60>;
+
+			regulators {
+				s2dos05_ldo1: ldo1 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-name = "ldo1";
+				};
+
+				s2dos05_ldo2: ldo2 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-name = "ldo2";
+				};
+
+				s2dos05_ldo3: ldo3 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-name = "ldo3";
+				};
+
+				s2dos05_ldo4: ldo4 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <3775000>;
+					regulator-name = "ldo4";
+				};
+
+				s2dos05_buck: buck {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <2100000>;
+					regulator-name = "buck";
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -556,6 +619,20 @@ &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */
 
+	i2c21_sda_state: i2c21-sda-state {
+		pins = "gpio127";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c21_scl_state: i2c21-scl-state {
+		pins = "gpio128";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	motor_pwm_default_state: motor-pwm-active-state {
 		pins = "gpio57";
 		function = "gcc_gp1";

-- 
2.39.5