[PATCH AUTOSEL 5.4 1/7] scsi: qla1280: Fix hw revision numbering for ISP1020/1040

[Sasha Levin <sashal@kernel.org>]

From: Magnus Lindholm <linmag7@gmail.com>

[ Upstream commit c064de86d2a3909222d5996c5047f64c7a8f791b ]

Fix the hardware revision numbering for Qlogic ISP1020/1040 boards.  HWMASK
suggests that the revision number only needs four bits, this is consistent
with how NetBSD does things in their ISP driver. Verified on a IPS1040B
which is seen as rev 5 not as BIT_4.

Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20241113225636.2276-1-linmag7@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla1280.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index a1a8aefc7cc39..9d4c997c3c820 100644
--- a/drivers/scsi/qla1280.h
+++ b/drivers/scsi/qla1280.h
@@ -117,12 +117,12 @@ struct device_reg {
 	uint16_t id_h;		/* ID high */
 	uint16_t cfg_0;		/* Configuration 0 */
 #define ISP_CFG0_HWMSK   0x000f	/* Hardware revision mask */
-#define ISP_CFG0_1020    BIT_0	/* ISP1020 */
-#define ISP_CFG0_1020A	 BIT_1	/* ISP1020A */
-#define ISP_CFG0_1040	 BIT_2	/* ISP1040 */
-#define ISP_CFG0_1040A	 BIT_3	/* ISP1040A */
-#define ISP_CFG0_1040B	 BIT_4	/* ISP1040B */
-#define ISP_CFG0_1040C	 BIT_5	/* ISP1040C */
+#define ISP_CFG0_1020	 1	/* ISP1020 */
+#define ISP_CFG0_1020A	 2	/* ISP1020A */
+#define ISP_CFG0_1040	 3	/* ISP1040 */
+#define ISP_CFG0_1040A	 4	/* ISP1040A */
+#define ISP_CFG0_1040B	 5	/* ISP1040B */
+#define ISP_CFG0_1040C	 6	/* ISP1040C */
 	uint16_t cfg_1;		/* Configuration 1 */
 #define ISP_CFG1_F128    BIT_6  /* 128-byte FIFO threshold */
 #define ISP_CFG1_F64     BIT_4|BIT_5 /* 128-byte FIFO threshold */
-- 
2.43.0