Re: [PATCH v6 0/5] Fix USB suspend on TI J7200 (cdns3-ti, cdns3, xhci)

[Peter Chen <peter.chen@kernel.org>]

On 24-12-10 18:13:34, Théo Lebrun wrote:
> Currently, system-wide suspend is broken on J7200 because of a
> controller reset. The TI wrapper does not get re-initialised at resume
> and the first register access from cdns core fails.
> 
> We address that in two ways:
> 
>  - In the cdns3-ti wrapper, if a reset has occured at resume,
>    we reconfigure the hardware.
> 
>  - We add a xhci->lost_power flag. Identical to the XHCI_RESET_ON_RESUME
>    quirk, expect that it can be set at runtime.
> 
>    At resume, to summarise, we do:
>       xhci->lost_power = cdns_power_is_lost(cdns);

Is it possible you go to change xhci quirks runtime?

Peter
> 
> The previous revision merged both XHCI_RESET_ON_RESUME quirk and
> xhci->lost_power concepts into a single one (the quirk was the default
> value of the flag). Now, we separate those. It simplifies things
> because no additional compatible is required; we can detect everything
> at runtime.
> 
> Have a nice day,
> Théo
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
> Changes in v6:
> - Drop two upstreamed patches:
>   8e3dc6a51cca ("dt-bindings: usb: ti,j721e-usb: fix compatible list")
>   d7fad3c5c53e ("arm64: dts: ti: k3-am64: add USB fallback compatible to J721E")
> - dt-bindings: fix dt-schema syntax in compatible property.
> - Change the approach about xhci->lost_power and the
>   XHCI_RESET_ON_RESUME quirk. They are now separate and are checked
>   independently at resume. The quirk stays the same, the flag can be
>   detected at resume.
> - Drop many patches, now that we don't add a new compatible for J7200:
>   dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
>   usb: cdns3: add quirk to platform data for reset-on-resume
>   usb: cdns3-ti: grab auxdata from match data
>   usb: cdns3-ti: add J7200 support with reset-on-resume behavior
>   arm64: dts: ti: k3-j7200: use J7200-specific USB compatible
> - Link to v5: https://lore.kernel.org/r/20240726-s2r-cdns-v5-0-8664bfb032ac@bootlin.com
> 
> Changes in v5:
> - dt-bindings: take Reviewed-by Rob and Conor for the first
>   patch: "dt-bindings: usb: ti,j721e-usb: fix compatible list".
> - cdns3-ti:
>   - We now do have HW init code inside cdns_ti_reset_and_init_hw().
>   - It gets called at probe unconditionally and from ->runtime_resume()
>     if a reset is detected (using the W1 register).
>   - Auxdata patches have been reworked now that there is default auxdata
>     since commit b50a2da03bd9 ("usb: cdns3-ti: Add workaround for
>     Errata i2409"). We now have a patch that moves auxdata to match
>     data: "usb: cdns3-ti: grab auxdata from match data".
> - cdns3/xhci: those are three new patches.
>   - First, we rename "hibernated" to "lost_power" in arguments to
>     the role ->resume() callbacks.
>   - Then we add the xhci->lost_power flag, and only have it always copy
>     the value from XHCI_RESET_ON_RESUME.
>   - Finally, we set the flag from the host role driver.
> - Link to v4: https://lore.kernel.org/lkml/20240307-j7200-usb-suspend-v4-0-5ec7615431f3@bootlin.com/
> 
> Changes in v4:
> - dt-bindings: usb: ti,j721e-usb:
>   - Remove ti,am64-usb single compatible entry.
>   - Reverse ordering of compatible pair j721e + am64
>     (becoming am64 + j721e).
>   - Add j7200 + j721e compatible pair (versus only j7200). It is the
>     same thing as am64: only the integration differs with base j721e
>     compatible.
>   - NOT taking trailers from Conor as patches changed substantially.
> - arm64: dts: ti: j3-j7200:
>   - Use j7200 + j721e compatible pair (versus only j7200 previously).
> - arm64: dts: ti: j3-am64:
>   - Fix to use am64 + j721e compatible pair (versus only am64).
>     This is a new patch.
> - Link to v3: https://lore.kernel.org/r/20240223-j7200-usb-suspend-v3-0-b41c9893a130@bootlin.com
> 
> Changes in v3:
> - dt-bindings: use an enum to list compatibles instead of the previous
>   odd construct. This is done in a separate patch from the one adding
>   J7200 compatible.
> - dt-bindings: dropped Acked-by Conor as the changes were modified a lot.
> - Add runtime PM back. Put the init sequence in ->runtime_resume(). It
>   gets called at probe for all compatibles and at resume for J7200.
> - Introduce a cdns_ti_match_data struct rather than rely on compatible
>   from code.
> - Reorder code changes. Add infrastructure based on match data THEN add
>   compatible and its match data.
> - DTSI: use only J7200 compatible rather than both J7200 then J721E.
> - Link to v2: https://lore.kernel.org/r/20231120-j7200-usb-suspend-v2-0-038c7e4a3df4@bootlin.com
> 
> Changes in v2:
> - Remove runtime PM from cdns3-ti; it brings nothing. That means our
>   cdns3-ti suspend/resume patch is simpler; there is no need to handle
>   runtime PM at suspend/resume.
> - Do not add cdns3 host role suspend/resume callbacks; they are not
>   needed as core detects reset on resume & calls cdns_drd_host_on when
>   needed.
> - cdns3-ti: Move usb2_refclk_rate_code assignment closer to the value
>   computation.
> - cdns3/host.c: do not pass XHCI_SUSPEND_RESUME_CLKS quirk to xHCI; it
>   is unneeded on our platform.
> - Link to v1: https://lore.kernel.org/r/20231113-j7200-usb-suspend-v1-0-ad1ee714835c@bootlin.com
> 
> ---
> Théo Lebrun (5):
>       usb: cdns3-ti: move reg writes to separate function
>       usb: cdns3-ti: run HW init at resume() if HW was reset
>       usb: cdns3: rename hibernated argument of role->resume() to lost_power
>       xhci: introduce xhci->lost_power flag
>       usb: cdns3: host: transmit lost_power signal from wrapper to XHCI
> 
>  drivers/usb/cdns3/cdns3-gadget.c |   4 +-
>  drivers/usb/cdns3/cdns3-ti.c     | 109 +++++++++++++++++++++++++--------------
>  drivers/usb/cdns3/cdnsp-gadget.c |   2 +-
>  drivers/usb/cdns3/core.h         |   2 +-
>  drivers/usb/cdns3/host.c         |  10 ++++
>  drivers/usb/host/xhci.c          |   3 +-
>  drivers/usb/host/xhci.h          |   6 +++
>  7 files changed, 93 insertions(+), 43 deletions(-)
> ---
> base-commit: d1869e31ecb0bb7397c6a04c29f281864e9257e3
> change-id: 20240726-s2r-cdns-4b180cd960ff
> 
> Best regards,
> -- 
> Théo Lebrun <theo.lebrun@bootlin.com>
>