Re: [PATCH 3/3] arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp)

[Pengyu Luo <mitltlatltl@gmail.com>]

On Fri, Dec 13, 2024 at 1:13 AM Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> wrote:

[...]

>> +
>> +		/* /lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin
>> +		 * there is no calibrate data for huawei,
>> +		 * but they have the same subsystem-device id
>> +		 */
>> +		qcom,ath11k-calibration-variant = "LE_X13S";
> 
> Oh, this can be taken care of! See [2], [3].

[...]

Hi, Konrad

I want to distrub you again.

Finally, I found something, after I enabled ath11k boot dbg, I got my
id_string='bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=255`

With qca-swiss-army-knife (see [1])

$ ./ath11k-bdencoder -e board-2.bin | grep -i "$id_string"
bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=255.bin created size: 60048

It have already been here. So that means I don't need to extract from
Windows. I just extract it from linux-firmware then give it a variant
name and send patches to ath11k, right?

Pengyu

[1] https://github.com/qca/qca-swiss-army-knife