Re: [PATCH v6 05/17] spi: add offload TX/RX streaming APIs

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 11 Dec 2024 14:54:42 -0600
David Lechner <dlechner@baylibre.com> wrote:

> Most configuration of SPI offloads is handled opaquely using the offload
> pointer that is passed to the various offload functions. However, there
> are some offload features that need to be controlled on a per transfer
> basis.
> 
> This patch adds a flag field to struct spi_transfer to allow specifying
> such features. The first feature to be added is the ability to stream
> data to/from a hardware sink/source rather than using a tx or rx buffer.
> Additional flags can be added in the future as needed.
> 
> A flags field is also added to the offload struct for providers to
> indicate which flags are supported. This allows for generic checking of
> offload capabilities during __spi_validate() so that each offload
> provider doesn't have to implement their own validation.
> 
> As a first users of this streaming capability, getter functions are
> added to get a DMA channel that is directly connected to the offload.
> Peripheral drivers will use this to get a DMA channel and configure it
> to suit their needs.
> 
> Signed-off-by: David Lechner <dlechner@baylibre.com>

Really really minor comment inline.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index ff1add2ecb91f18cf82e6f1e9595584c11adf9d8..4a871db9ee636aba64c866ebdd8bb1dbf82e0f42 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -31,6 +31,7 @@
>  #include <linux/ptp_clock_kernel.h>
>  #include <linux/sched/rt.h>
>  #include <linux/slab.h>
> +#include <linux/spi/offload/types.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spi/spi-mem.h>
>  #include <uapi/linux/sched/types.h>
> @@ -4163,6 +4164,15 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
>  
>  		if (_spi_xfer_word_delay_update(xfer, spi))
>  			return -EINVAL;
> +
> +		/* make sure controller supports required offload features */
Comment syntax seems inconsistent with local code. 

		/* Make sure controller supports required offload features. */

> +		if (xfer->offload_flags) {
> +			if (!message->offload)
> +				return -EINVAL;
> +
> +			if (xfer->offload_flags & ~message->offload->xfer_flags)
> +				return -EINVAL;
> +		}
>  	}
>  
>  	message->status = -EINPROGRESS;