From: Frank Wunderlich <linux@fw-web.de>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: Frank Wunderlich <frank-w@public-files.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH v3 13/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add dt overlays for sd + emmc
Date: Tue, 17 Dec 2024 10:12:27 +0100 [thread overview]
Message-ID: <20241217091238.16032-14-linux@fw-web.de> (raw)
In-Reply-To: <20241217091238.16032-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
Bananapi R4 can use the mmc controller either with sd card or the onboard
emmc. The used device is selected through hardware-switches and probed in
bootloader.
Add devicetree overlays for both mmc configurations.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
arch/arm64/boot/dts/mediatek/Makefile | 3 ++
.../mt7988a-bananapi-bpi-r4-emmc.dtso | 33 +++++++++++++++++++
.../mediatek/mt7988a-bananapi-bpi-r4-sd.dtso | 31 +++++++++++++++++
3 files changed, 67 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 8fd7b2bb7a15..33e244898849 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -21,6 +21,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-sd.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
@@ -90,3 +92,4 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
# Device tree overlays support
DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@
DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4 := -@
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
new file mode 100644
index 000000000000..3e320b2f83d5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_emmc_51>;
+ pinctrl-1 = <&mmc0_pins_emmc_51>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ hs400-ds-delay = <0x12814>;
+ vqmmc-supply = <®_1p8v>;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
new file mode 100644
index 000000000000..663c6345dd31
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_sdcard>;
+ pinctrl-1 = <&mmc0_pins_sdcard>;
+ cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ max-frequency = <52000000>;
+ cap-sd-highspeed;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ no-mmc;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
--
2.43.0
next prev parent reply other threads:[~2024-12-17 9:13 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-17 9:12 [PATCH v3 00/22] continue mt7988 devicetree work Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 01/22] arm64: dts: mediatek: mt7988: Add reserved memory Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 02/22] arm64: dts: mediatek: mt7988: Add mmc support Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 03/22] arm64: dts: mediatek: mt7988: Add lvts node Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 04/22] arm64: dts: mediatek: mt7988: Add thermal-zone Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 05/22] arm64: dts: mediatek: mt7988: Add missing clock-div property for i2c Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 06/22] arm64: dts: mediatek: mt7988: Add mcu-sys node for cpu Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 07/22] arm64: dts: mediatek: mt7988: Add CPU OPP table for clock scaling Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 08/22] arm64: dts: mediatek: mt7988: Disable usb controllers by default Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 09/22] arm64: dts: mediatek: mt7988: Add t-phy for ssusb1 Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 10/22] arm64: dts: mediatek: mt7988: Add pcie nodes Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 11/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable watchdog Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 12/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add fixed regulators for 1v8 and 3v3 Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich [this message]
2024-12-17 9:12 ` [PATCH v3 14/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add thermal configuration Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 15/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 16/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 17/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 18/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 19/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1 Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 20/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4 Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 21/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 22/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie Frank Wunderlich
2024-12-18 14:10 ` [PATCH v3 00/22] continue mt7988 devicetree work AngeloGioacchino Del Regno
2025-01-02 12:46 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241217091238.16032-14-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox