[PATCH v3 09/22] arm64: dts: mediatek: mt7988: Add t-phy for ssusb1

Frank Wunderlich
2024-12-17T09:12:59Z

USB controller needs phys for working properly.
On mt7988 ssusb0 uses a xs-phy, ssusb uses t-phy.
For now add the t-phy for ssusb1. We can reuse the mt7986 compatible
here.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index f8b01f3fff32..209d170bce7f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -349,6 +349,8 @@ usb@11200000 {
<&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>,
<&infracfg CLK_INFRA_USB_XHCI_CK_P1>;
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+ phys = <&tphyu2port0 PHY_TYPE_USB2>,
+ <&tphyu3port0 PHY_TYPE_USB3>;
status = "disabled";
};

@@ -371,6 +373,29 @@ mmc0: mmc@11230000 {
status = "disabled";
};

+ t-phy@11c50000 {
+ compatible = "mediatek,mt7986-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ tphyu2port0: usb-phy@11c50000 {
+ reg = <0 0x11c50000 0 0x700>;
+ clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+
+ tphyu3port0: usb-phy@11c50700 {
+ reg = <0 0x11c50700 0 0x900>;
+ clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
clock-controller@11f40000 {
compatible = "mediatek,mt7988-xfi-pll";
reg = <0 0x11f40000 0 0x1000>;
--
2.43.0