From: Kurt Borja <kuurtb@gmail.com>
To: platform-driver-x86@vger.kernel.org
Cc: Dell.Client.Kernel@dell.com, hdegoede@redhat.com,
ilpo.jarvinen@linux.intel.com, linux-kernel@vger.kernel.org,
mario.limonciello@amd.com, w_armin@gmx.de,
Kurt Borja <kuurtb@gmail.com>, Armin Wolf <W_Armin@gmx.de>
Subject: [PATCH v2 09/20] alienware-wmi: Add a state container for thermal control methods
Date: Sun, 29 Dec 2024 14:44:56 -0500 [thread overview]
Message-ID: <20241229194506.8268-11-kuurtb@gmail.com> (raw)
In-Reply-To: <20241229194506.8268-2-kuurtb@gmail.com>
Refactor all thermal control methods to use the newly defined awcc_priv
state container instead of global variables.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
drivers/platform/x86/dell/alienware-wmi.c | 66 ++++++++++++++++-------
1 file changed, 47 insertions(+), 19 deletions(-)
diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 87a7997579c9..512384635c4c 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -403,6 +403,12 @@ struct wmax_u32_args {
u8 arg3;
};
+struct awcc_priv {
+ struct wmi_device *wdev;
+ struct platform_profile_handler pp_handler;
+ enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+};
+
struct alienfx_priv {
struct platform_device *pdev;
struct quirk_entry *quirks;
@@ -416,9 +422,6 @@ struct alienfx_platdata {
struct wmi_device *wdev;
};
-static struct platform_profile_handler pp_handler;
-static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-
static u8 interface;
/*
@@ -1051,6 +1054,8 @@ static int thermal_profile_get(struct platform_profile_handler *pprof,
static int thermal_profile_set(struct platform_profile_handler *pprof,
enum platform_profile_option profile)
{
+ struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
+
if (quirks->gmode) {
u32 gmode_status;
int ret;
@@ -1071,11 +1076,12 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
}
}
- return wmax_thermal_control(supported_thermal_profiles[profile]);
+ return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
}
static int create_thermal_profile(struct wmi_device *wdev)
{
+ struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
enum platform_profile_option profile;
enum wmax_thermal_mode mode;
u8 sys_desc[4];
@@ -1105,33 +1111,55 @@ static int create_thermal_profile(struct wmi_device *wdev)
mode = out_data & WMAX_THERMAL_MODE_MASK;
profile = wmax_mode_to_platform_profile[mode];
- supported_thermal_profiles[profile] = out_data;
+ priv->supported_thermal_profiles[profile] = out_data;
- set_bit(profile, pp_handler.choices);
+ set_bit(profile, priv->pp_handler.choices);
}
- if (bitmap_empty(pp_handler.choices, PLATFORM_PROFILE_LAST))
+ if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
return -ENODEV;
if (quirks->gmode) {
- supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+ priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
WMAX_THERMAL_MODE_GMODE;
- set_bit(PLATFORM_PROFILE_PERFORMANCE, pp_handler.choices);
+ set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
}
- pp_handler.profile_get = thermal_profile_get;
- pp_handler.profile_set = thermal_profile_set;
- pp_handler.name = "alienware-wmi";
- pp_handler.dev = &wdev->dev;
+ priv->pp_handler.profile_get = thermal_profile_get;
+ priv->pp_handler.profile_set = thermal_profile_set;
+ priv->pp_handler.name = "alienware-wmi";
+ priv->pp_handler.dev = &wdev->dev;
- return platform_profile_register(&pp_handler);
+ return platform_profile_register(&priv->pp_handler);
}
-static void remove_thermal_profile(void)
+static int alienware_awcc_setup(struct wmi_device *wdev)
{
- if (quirks->thermal)
- platform_profile_remove(&pp_handler);
+ struct awcc_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(&wdev->dev, priv);
+ priv->wdev = wdev;
+
+ ret = create_thermal_profile(wdev);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void alienware_awcc_exit(struct wmi_device *wdev)
+{
+ struct awcc_priv *priv;
+
+ priv = dev_get_drvdata(&wdev->dev);
+
+ platform_profile_remove(&priv->pp_handler);
}
/*
@@ -1271,7 +1299,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
int ret;
if (quirks->thermal) {
- ret = create_thermal_profile(wdev);
+ ret = alienware_awcc_setup(wdev);
} else {
ret = alienware_alienfx_setup(&pdata);
if (ret < 0)
@@ -1287,7 +1315,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
static void wmax_wmi_remove(struct wmi_device *wdev)
{
if (quirks->thermal)
- remove_thermal_profile();
+ alienware_awcc_exit(wdev);
else
alienware_alienfx_exit(wdev);
}
--
2.47.1
next prev parent reply other threads:[~2024-12-29 19:47 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-29 19:44 [PATCH v2 00/20] alienware-wmi driver rework Kurt Borja
2024-12-29 19:44 ` [PATCH v2 01/20] alienware-wmi: Remove unnecessary check at module exit Kurt Borja
2024-12-29 19:44 ` [PATCH v2 02/20] alienware-wmi: Move Lighting Control State Kurt Borja
2024-12-29 19:44 ` [PATCH v2 03/20] alienware-wmi: Modify parse_rgb() signature Kurt Borja
2024-12-29 19:44 ` [PATCH v2 04/20] alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation Kurt Borja
2024-12-29 19:44 ` [PATCH v2 05/20] alienware-wmi: Improve rgb-zones " Kurt Borja
2025-01-02 15:44 ` Armin Wolf
2025-01-02 18:33 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 06/20] alienware_wmi: General cleanup of WMAX methods Kurt Borja
2025-01-02 15:50 ` Armin Wolf
2024-12-29 19:44 ` [PATCH v2 07/20] alienware-wmi: Add a state container for LED control feature Kurt Borja
2025-01-02 16:07 ` Armin Wolf
2025-01-02 18:45 ` Kurt Borja
2025-01-02 19:20 ` Armin Wolf
2025-01-02 19:40 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 08/20] alienware-wmi: Add WMI Drivers Kurt Borja
2025-01-02 16:16 ` Armin Wolf
2025-01-02 18:49 ` Kurt Borja
2024-12-29 19:44 ` Kurt Borja [this message]
2025-01-02 16:19 ` [PATCH v2 09/20] alienware-wmi: Add a state container for thermal control methods Armin Wolf
2025-01-02 18:52 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 10/20] alienware-wmi: Refactor LED " Kurt Borja
2025-01-02 16:29 ` Armin Wolf
2025-01-02 19:36 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 11/20] alienware-wmi: Refactor hdmi, amplifier, deepslp methods Kurt Borja
2024-12-29 19:44 ` [PATCH v2 12/20] alienware-wmi: Refactor thermal control methods Kurt Borja
2024-12-29 19:45 ` [PATCH v2 13/20] alienware-wmi: Split DMI table Kurt Borja
2025-01-02 16:36 ` Armin Wolf
2025-01-02 19:37 ` Kurt Borja
2024-12-29 19:45 ` [PATCH v2 14/20] MAINTAINERS: Update ALIENWARE WMI DRIVER entry Kurt Borja
2024-12-29 19:45 ` [PATCH v2 15/20] platform/x86: Rename alienware-wmi.c Kurt Borja
2024-12-29 19:45 ` [PATCH v2 16/20] platform/x86: Add alienware-wmi.h Kurt Borja
2025-01-02 16:43 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 17/20] platform-x86: Split the alienware-wmi driver Kurt Borja
2025-01-02 16:49 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 18/20] platform/x86: dell: Modify Makefile alignment Kurt Borja
2024-12-29 19:45 ` [PATCH v2 19/20] platform/x86: Update alienware-wmi config entries Kurt Borja
2025-01-02 16:57 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 20/20] alienware-wmi: Update header and module information Kurt Borja
2025-01-02 15:50 ` [PATCH v2 00/20] alienware-wmi driver rework Armin Wolf
2025-01-02 19:41 ` Kurt Borja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241229194506.8268-11-kuurtb@gmail.com \
--to=kuurtb@gmail.com \
--cc=Dell.Client.Kernel@dell.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=w_armin@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox