From: Kurt Borja <kuurtb@gmail.com>
To: platform-driver-x86@vger.kernel.org
Cc: Dell.Client.Kernel@dell.com, hdegoede@redhat.com,
ilpo.jarvinen@linux.intel.com, linux-kernel@vger.kernel.org,
mario.limonciello@amd.com, w_armin@gmx.de,
Kurt Borja <kuurtb@gmail.com>, Armin Wolf <W_Armin@gmx.de>
Subject: [PATCH v2 11/20] alienware-wmi: Refactor hdmi, amplifier, deepslp methods
Date: Sun, 29 Dec 2024 14:44:58 -0500 [thread overview]
Message-ID: <20241229194506.8268-13-kuurtb@gmail.com> (raw)
In-Reply-To: <20241229194506.8268-2-kuurtb@gmail.com>
Refactor show/store methods for hdmi, amplifier, deepslp sysfs groups to
use alienware_wmi_command() instead of alienware_wmax_command() which
uses deprecated WMI methods.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
drivers/platform/x86/dell/alienware-wmi.c | 85 +++++++++++++----------
1 file changed, 50 insertions(+), 35 deletions(-)
diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 494a3772065c..ea276d32cf14 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -698,51 +698,58 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
+ struct alienfx_platdata *pdata = dev_get_platdata(dev);
struct wmax_basic_args in_args = {
.arg = 0,
};
- acpi_status status;
u32 out_data;
- status =
- alienware_wmax_command(&in_args, sizeof(in_args),
- WMAX_METHOD_HDMI_CABLE, &out_data);
- if (ACPI_SUCCESS(status)) {
+ int ret;
+
+ ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
+ &in_args, sizeof(in_args), &out_data);
+
+ if (!ret) {
if (out_data == 0)
return sysfs_emit(buf, "[unconnected] connected unknown\n");
else if (out_data == 1)
return sysfs_emit(buf, "unconnected [connected] unknown\n");
}
- pr_err("alienware-wmi: unknown HDMI cable status: %d\n", status);
+
+ pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret);
return sysfs_emit(buf, "unconnected connected [unknown]\n");
}
static ssize_t source_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
+ struct alienfx_platdata *pdata = dev_get_platdata(dev);
struct wmax_basic_args in_args = {
.arg = 0,
};
- acpi_status status;
u32 out_data;
- status =
- alienware_wmax_command(&in_args, sizeof(in_args),
- WMAX_METHOD_HDMI_STATUS, &out_data);
+ int ret;
- if (ACPI_SUCCESS(status)) {
+ ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
+ &in_args, sizeof(in_args), &out_data);
+
+ if (!ret) {
if (out_data == 1)
return sysfs_emit(buf, "[input] gpu unknown\n");
else if (out_data == 2)
return sysfs_emit(buf, "input [gpu] unknown\n");
}
- pr_err("alienware-wmi: unknown HDMI source status: %u\n", status);
+
+ pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret);
return sysfs_emit(buf, "input gpu [unknown]\n");
}
static ssize_t source_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct alienfx_platdata *pdata = dev_get_platdata(dev);
struct wmax_basic_args args;
- acpi_status status;
+ int ret;
+
if (strcmp(buf, "gpu\n") == 0)
args.arg = 1;
else if (strcmp(buf, "input\n") == 0)
@@ -751,12 +758,12 @@ static ssize_t source_store(struct device *dev, struct device_attribute *attr,
args.arg = 3;
pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
- status = alienware_wmax_command(&args, sizeof(args),
- WMAX_METHOD_HDMI_SOURCE, NULL);
+ ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE, &args,
+ sizeof(args), NULL);
+
+ if (ret < 0)
+ pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret);
- if (ACPI_FAILURE(status))
- pr_err("alienware-wmi: HDMI toggle failed: results: %u\n",
- status);
return count;
}
@@ -791,21 +798,24 @@ static const struct attribute_group hdmi_attribute_group = {
static ssize_t status_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
+ struct alienfx_platdata *pdata = dev_get_platdata(dev);
struct wmax_basic_args in_args = {
.arg = 0,
};
- acpi_status status;
u32 out_data;
- status =
- alienware_wmax_command(&in_args, sizeof(in_args),
- WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
- if (ACPI_SUCCESS(status)) {
+ int ret;
+
+ ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
+ &in_args, sizeof(in_args), &out_data);
+
+ if (!ret) {
if (out_data == 0)
return sysfs_emit(buf, "[unconnected] connected unknown\n");
else if (out_data == 1)
return sysfs_emit(buf, "unconnected [connected] unknown\n");
}
- pr_err("alienware-wmi: unknown amplifier cable status: %d\n", status);
+
+ pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret);
return sysfs_emit(buf, "unconnected connected [unknown]\n");
}
@@ -837,14 +847,17 @@ static const struct attribute_group amplifier_attribute_group = {
static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
+ struct alienfx_platdata *pdata = dev_get_platdata(dev);
struct wmax_basic_args in_args = {
.arg = 0,
};
- acpi_status status;
u32 out_data;
- status = alienware_wmax_command(&in_args, sizeof(in_args),
- WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
- if (ACPI_SUCCESS(status)) {
+ int ret;
+
+ ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
+ &in_args, sizeof(in_args), &out_data);
+
+ if (!ret) {
if (out_data == 0)
return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
else if (out_data == 1)
@@ -852,15 +865,17 @@ static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
else if (out_data == 2)
return sysfs_emit(buf, "disabled s5 [s5_s4]\n");
}
- pr_err("alienware-wmi: unknown deep sleep status: %d\n", status);
+
+ pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret);
return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
}
static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct alienfx_platdata *pdata = dev_get_platdata(dev);
struct wmax_basic_args args;
- acpi_status status;
+ int ret;
if (strcmp(buf, "disabled\n") == 0)
args.arg = 0;
@@ -870,12 +885,12 @@ static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr
args.arg = 2;
pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
- status = alienware_wmax_command(&args, sizeof(args),
- WMAX_METHOD_DEEP_SLEEP_CONTROL, NULL);
+ ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
+ &args, sizeof(args), NULL);
+
+ if (!ret)
+ pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret);
- if (ACPI_FAILURE(status))
- pr_err("alienware-wmi: deep sleep control failed: results: %u\n",
- status);
return count;
}
--
2.47.1
next prev parent reply other threads:[~2024-12-29 19:47 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-29 19:44 [PATCH v2 00/20] alienware-wmi driver rework Kurt Borja
2024-12-29 19:44 ` [PATCH v2 01/20] alienware-wmi: Remove unnecessary check at module exit Kurt Borja
2024-12-29 19:44 ` [PATCH v2 02/20] alienware-wmi: Move Lighting Control State Kurt Borja
2024-12-29 19:44 ` [PATCH v2 03/20] alienware-wmi: Modify parse_rgb() signature Kurt Borja
2024-12-29 19:44 ` [PATCH v2 04/20] alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation Kurt Borja
2024-12-29 19:44 ` [PATCH v2 05/20] alienware-wmi: Improve rgb-zones " Kurt Borja
2025-01-02 15:44 ` Armin Wolf
2025-01-02 18:33 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 06/20] alienware_wmi: General cleanup of WMAX methods Kurt Borja
2025-01-02 15:50 ` Armin Wolf
2024-12-29 19:44 ` [PATCH v2 07/20] alienware-wmi: Add a state container for LED control feature Kurt Borja
2025-01-02 16:07 ` Armin Wolf
2025-01-02 18:45 ` Kurt Borja
2025-01-02 19:20 ` Armin Wolf
2025-01-02 19:40 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 08/20] alienware-wmi: Add WMI Drivers Kurt Borja
2025-01-02 16:16 ` Armin Wolf
2025-01-02 18:49 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 09/20] alienware-wmi: Add a state container for thermal control methods Kurt Borja
2025-01-02 16:19 ` Armin Wolf
2025-01-02 18:52 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 10/20] alienware-wmi: Refactor LED " Kurt Borja
2025-01-02 16:29 ` Armin Wolf
2025-01-02 19:36 ` Kurt Borja
2024-12-29 19:44 ` Kurt Borja [this message]
2024-12-29 19:44 ` [PATCH v2 12/20] alienware-wmi: Refactor thermal " Kurt Borja
2024-12-29 19:45 ` [PATCH v2 13/20] alienware-wmi: Split DMI table Kurt Borja
2025-01-02 16:36 ` Armin Wolf
2025-01-02 19:37 ` Kurt Borja
2024-12-29 19:45 ` [PATCH v2 14/20] MAINTAINERS: Update ALIENWARE WMI DRIVER entry Kurt Borja
2024-12-29 19:45 ` [PATCH v2 15/20] platform/x86: Rename alienware-wmi.c Kurt Borja
2024-12-29 19:45 ` [PATCH v2 16/20] platform/x86: Add alienware-wmi.h Kurt Borja
2025-01-02 16:43 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 17/20] platform-x86: Split the alienware-wmi driver Kurt Borja
2025-01-02 16:49 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 18/20] platform/x86: dell: Modify Makefile alignment Kurt Borja
2024-12-29 19:45 ` [PATCH v2 19/20] platform/x86: Update alienware-wmi config entries Kurt Borja
2025-01-02 16:57 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 20/20] alienware-wmi: Update header and module information Kurt Borja
2025-01-02 15:50 ` [PATCH v2 00/20] alienware-wmi driver rework Armin Wolf
2025-01-02 19:41 ` Kurt Borja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241229194506.8268-13-kuurtb@gmail.com \
--to=kuurtb@gmail.com \
--cc=Dell.Client.Kernel@dell.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=w_armin@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox