From: Kurt Borja <kuurtb@gmail.com>
To: platform-driver-x86@vger.kernel.org
Cc: Dell.Client.Kernel@dell.com, hdegoede@redhat.com,
ilpo.jarvinen@linux.intel.com, linux-kernel@vger.kernel.org,
mario.limonciello@amd.com, w_armin@gmx.de,
Kurt Borja <kuurtb@gmail.com>, Armin Wolf <W_Armin@gmx.de>
Subject: [PATCH v2 04/20] alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation
Date: Sun, 29 Dec 2024 14:44:51 -0500 [thread overview]
Message-ID: <20241229194506.8268-6-kuurtb@gmail.com> (raw)
In-Reply-To: <20241229194506.8268-2-kuurtb@gmail.com>
Devices with hdmi_mux, amplifier or deepslp quirks create a sysfs group
for each available feature. To accomplish this, helper create/remove
functions were called on module init, but they had the following
problems:
- Create helpers called remove helpers on failure, which in turn tried
to remove the sysfs group that failed to be created
- If group creation failed mid way, previous successfully created groups
were not cleaned up
- Module exit only removed hdmi_mux group
To improve this, drop all helpers and let the platform driver manage these
sysfs groups, while controlling visibility with their respective quirks.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
drivers/platform/x86/dell/alienware-wmi.c | 114 ++++++++--------------
1 file changed, 38 insertions(+), 76 deletions(-)
diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 273ce9b10765..e010c94555e8 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -417,12 +417,6 @@ static struct platform_zone *zone_data;
static struct platform_profile_handler pp_handler;
static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-static struct platform_driver platform_driver = {
- .driver = {
- .name = "alienware-wmi",
- }
-};
-
static struct attribute_group zone_attribute_group = {
.name = "rgb_zones",
};
@@ -804,6 +798,12 @@ static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
toggle_hdmi_source);
+static bool hdmi_group_visible(struct kobject *kobj)
+{
+ return quirks->hdmi_mux;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
+
static struct attribute *hdmi_attrs[] = {
&dev_attr_cable.attr,
&dev_attr_source.attr,
@@ -812,25 +812,10 @@ static struct attribute *hdmi_attrs[] = {
static const struct attribute_group hdmi_attribute_group = {
.name = "hdmi",
+ .is_visible = SYSFS_GROUP_VISIBLE(hdmi),
.attrs = hdmi_attrs,
};
-static void remove_hdmi(struct platform_device *dev)
-{
- if (quirks->hdmi_mux > 0)
- sysfs_remove_group(&dev->dev.kobj, &hdmi_attribute_group);
-}
-
-static int create_hdmi(struct platform_device *dev)
-{
- int ret;
-
- ret = sysfs_create_group(&dev->dev.kobj, &hdmi_attribute_group);
- if (ret)
- remove_hdmi(dev);
- return ret;
-}
-
/*
* Alienware GFX amplifier support
* - Currently supports reading cable status
@@ -859,6 +844,12 @@ static ssize_t show_amplifier_status(struct device *dev,
static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
+static bool amplifier_group_visible(struct kobject *kobj)
+{
+ return quirks->amplifier;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
+
static struct attribute *amplifier_attrs[] = {
&dev_attr_status.attr,
NULL,
@@ -866,25 +857,10 @@ static struct attribute *amplifier_attrs[] = {
static const struct attribute_group amplifier_attribute_group = {
.name = "amplifier",
+ .is_visible = SYSFS_GROUP_VISIBLE(amplifier),
.attrs = amplifier_attrs,
};
-static void remove_amplifier(struct platform_device *dev)
-{
- if (quirks->amplifier > 0)
- sysfs_remove_group(&dev->dev.kobj, &lifier_attribute_group);
-}
-
-static int create_amplifier(struct platform_device *dev)
-{
- int ret;
-
- ret = sysfs_create_group(&dev->dev.kobj, &lifier_attribute_group);
- if (ret)
- remove_amplifier(dev);
- return ret;
-}
-
/*
* Deep Sleep Control support
* - Modifies BIOS setting for deep sleep control allowing extra wakeup events
@@ -937,6 +913,12 @@ static ssize_t toggle_deepsleep(struct device *dev,
static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
+static bool deepsleep_group_visible(struct kobject *kobj)
+{
+ return quirks->deepslp;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
+
static struct attribute *deepsleep_attrs[] = {
&dev_attr_deepsleep.attr,
NULL,
@@ -944,25 +926,10 @@ static struct attribute *deepsleep_attrs[] = {
static const struct attribute_group deepsleep_attribute_group = {
.name = "deepsleep",
+ .is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
.attrs = deepsleep_attrs,
};
-static void remove_deepsleep(struct platform_device *dev)
-{
- if (quirks->deepslp > 0)
- sysfs_remove_group(&dev->dev.kobj, &deepsleep_attribute_group);
-}
-
-static int create_deepsleep(struct platform_device *dev)
-{
- int ret;
-
- ret = sysfs_create_group(&dev->dev.kobj, &deepsleep_attribute_group);
- if (ret)
- remove_deepsleep(dev);
- return ret;
-}
-
/*
* Thermal Profile control
* - Provides thermal profile control through the Platform Profile API
@@ -1172,6 +1139,23 @@ static void remove_thermal_profile(void)
platform_profile_remove(&pp_handler);
}
+/*
+ * Platform Driver
+ */
+static const struct attribute_group *alienfx_groups[] = {
+ &hdmi_attribute_group,
+ &lifier_attribute_group,
+ &deepsleep_attribute_group,
+ NULL
+};
+
+static struct platform_driver platform_driver = {
+ .driver = {
+ .name = "alienware-wmi",
+ .dev_groups = alienfx_groups,
+ },
+};
+
static int __init alienware_wmi_init(void)
{
int ret;
@@ -1211,24 +1195,6 @@ static int __init alienware_wmi_init(void)
if (ret)
goto fail_platform_device2;
- if (quirks->hdmi_mux > 0) {
- ret = create_hdmi(platform_device);
- if (ret)
- goto fail_prep_hdmi;
- }
-
- if (quirks->amplifier > 0) {
- ret = create_amplifier(platform_device);
- if (ret)
- goto fail_prep_amplifier;
- }
-
- if (quirks->deepslp > 0) {
- ret = create_deepsleep(platform_device);
- if (ret)
- goto fail_prep_deepsleep;
- }
-
if (quirks->thermal) {
ret = create_thermal_profile(platform_device);
if (ret)
@@ -1245,9 +1211,6 @@ static int __init alienware_wmi_init(void)
alienware_zone_exit(platform_device);
remove_thermal_profile();
fail_prep_thermal_profile:
-fail_prep_deepsleep:
-fail_prep_amplifier:
-fail_prep_hdmi:
platform_device_del(platform_device);
fail_platform_device2:
platform_device_put(platform_device);
@@ -1262,7 +1225,6 @@ module_init(alienware_wmi_init);
static void __exit alienware_wmi_exit(void)
{
alienware_zone_exit(platform_device);
- remove_hdmi(platform_device);
remove_thermal_profile();
platform_device_unregister(platform_device);
platform_driver_unregister(&platform_driver);
--
2.47.1
next prev parent reply other threads:[~2024-12-29 19:46 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-29 19:44 [PATCH v2 00/20] alienware-wmi driver rework Kurt Borja
2024-12-29 19:44 ` [PATCH v2 01/20] alienware-wmi: Remove unnecessary check at module exit Kurt Borja
2024-12-29 19:44 ` [PATCH v2 02/20] alienware-wmi: Move Lighting Control State Kurt Borja
2024-12-29 19:44 ` [PATCH v2 03/20] alienware-wmi: Modify parse_rgb() signature Kurt Borja
2024-12-29 19:44 ` Kurt Borja [this message]
2024-12-29 19:44 ` [PATCH v2 05/20] alienware-wmi: Improve rgb-zones group creation Kurt Borja
2025-01-02 15:44 ` Armin Wolf
2025-01-02 18:33 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 06/20] alienware_wmi: General cleanup of WMAX methods Kurt Borja
2025-01-02 15:50 ` Armin Wolf
2024-12-29 19:44 ` [PATCH v2 07/20] alienware-wmi: Add a state container for LED control feature Kurt Borja
2025-01-02 16:07 ` Armin Wolf
2025-01-02 18:45 ` Kurt Borja
2025-01-02 19:20 ` Armin Wolf
2025-01-02 19:40 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 08/20] alienware-wmi: Add WMI Drivers Kurt Borja
2025-01-02 16:16 ` Armin Wolf
2025-01-02 18:49 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 09/20] alienware-wmi: Add a state container for thermal control methods Kurt Borja
2025-01-02 16:19 ` Armin Wolf
2025-01-02 18:52 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 10/20] alienware-wmi: Refactor LED " Kurt Borja
2025-01-02 16:29 ` Armin Wolf
2025-01-02 19:36 ` Kurt Borja
2024-12-29 19:44 ` [PATCH v2 11/20] alienware-wmi: Refactor hdmi, amplifier, deepslp methods Kurt Borja
2024-12-29 19:44 ` [PATCH v2 12/20] alienware-wmi: Refactor thermal control methods Kurt Borja
2024-12-29 19:45 ` [PATCH v2 13/20] alienware-wmi: Split DMI table Kurt Borja
2025-01-02 16:36 ` Armin Wolf
2025-01-02 19:37 ` Kurt Borja
2024-12-29 19:45 ` [PATCH v2 14/20] MAINTAINERS: Update ALIENWARE WMI DRIVER entry Kurt Borja
2024-12-29 19:45 ` [PATCH v2 15/20] platform/x86: Rename alienware-wmi.c Kurt Borja
2024-12-29 19:45 ` [PATCH v2 16/20] platform/x86: Add alienware-wmi.h Kurt Borja
2025-01-02 16:43 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 17/20] platform-x86: Split the alienware-wmi driver Kurt Borja
2025-01-02 16:49 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 18/20] platform/x86: dell: Modify Makefile alignment Kurt Borja
2024-12-29 19:45 ` [PATCH v2 19/20] platform/x86: Update alienware-wmi config entries Kurt Borja
2025-01-02 16:57 ` Armin Wolf
2024-12-29 19:45 ` [PATCH v2 20/20] alienware-wmi: Update header and module information Kurt Borja
2025-01-02 15:50 ` [PATCH v2 00/20] alienware-wmi driver rework Armin Wolf
2025-01-02 19:41 ` Kurt Borja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241229194506.8268-6-kuurtb@gmail.com \
--to=kuurtb@gmail.com \
--cc=Dell.Client.Kernel@dell.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=w_armin@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox