From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: netdev@vger.kernel.org, nicolas.ferre@atmel.com
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH RFT v2 2/2] macb: kill PHY reset code
Date: Fri, 29 Apr 2016 01:15:24 +0300 [thread overview]
Message-ID: <2024144.Eda96jDyaz@wasted.cogentembedded.com> (raw)
In-Reply-To: <19240252.825Vlx6L0H@wasted.cogentembedded.com>
With the 'phylib' now being aware of the "reset-gpios" PHY node property,
there should be no need to frob the PHY reset in this driver anymore...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
drivers/net/ethernet/cadence/macb.c | 17 -----------------
drivers/net/ethernet/cadence/macb.h | 1 -
2 files changed, 18 deletions(-)
Index: net-next/drivers/net/ethernet/cadence/macb.c
===================================================================
--- net-next.orig/drivers/net/ethernet/cadence/macb.c
+++ net-next/drivers/net/ethernet/cadence/macb.c
@@ -2884,7 +2884,6 @@ static int macb_probe(struct platform_de
= macb_clk_init;
int (*init)(struct platform_device *) = macb_init;
struct device_node *np = pdev->dev.of_node;
- struct device_node *phy_node;
const struct macb_config *macb_config = NULL;
struct clk *pclk, *hclk = NULL, *tx_clk = NULL;
unsigned int queue_mask, num_queues;
@@ -2977,18 +2976,6 @@ static int macb_probe(struct platform_de
else
macb_get_hwaddr(bp);
- /* Power up the PHY if there is a GPIO reset */
- phy_node = of_get_next_available_child(np, NULL);
- if (phy_node) {
- int gpio = of_get_named_gpio(phy_node, "reset-gpios", 0);
-
- if (gpio_is_valid(gpio)) {
- bp->reset_gpio = gpio_to_desc(gpio);
- gpiod_direction_output(bp->reset_gpio, 1);
- }
- }
- of_node_put(phy_node);
-
err = of_get_phy_mode(np);
if (err < 0) {
pdata = dev_get_platdata(&pdev->dev);
@@ -3054,10 +3041,6 @@ static int macb_remove(struct platform_d
mdiobus_unregister(bp->mii_bus);
mdiobus_free(bp->mii_bus);
- /* Shutdown the PHY if there is a GPIO reset */
- if (bp->reset_gpio)
- gpiod_set_value(bp->reset_gpio, 0);
-
unregister_netdev(dev);
clk_disable_unprepare(bp->tx_clk);
clk_disable_unprepare(bp->hclk);
Index: net-next/drivers/net/ethernet/cadence/macb.h
===================================================================
--- net-next.orig/drivers/net/ethernet/cadence/macb.h
+++ net-next/drivers/net/ethernet/cadence/macb.h
@@ -832,7 +832,6 @@ struct macb {
unsigned int dma_burst_length;
phy_interface_t phy_interface;
- struct gpio_desc *reset_gpio;
/* AT91RM9200 transmit */
struct sk_buff *skb; /* holds skb until xmit interrupt completes */
next prev parent reply other threads:[~2016-04-28 22:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-28 22:09 [PATCH RFT v2 0/2] Teach phylib hard-resetting devices Sergei Shtylyov
2016-04-28 22:15 ` Sergei Shtylyov [this message]
2016-04-29 9:36 ` [PATCH RFT v2 2/2] macb: kill PHY reset code Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024144.Eda96jDyaz@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox