[PATCH v3 00/20] platform/x86: alienware-wmi driver rework

[PATCH v3 00/20] platform/x86: alienware-wmi driver rework

[Kurt Borja]

Hello :) 

I rebased this series on top of review-ilpo-next to pick up
alienware-wmi's latest commit.

~ Kurt
---
v2 -> v3:

[5/20]
 - Use traditional if statement in zone_attr_visible and return attr->mode

[7/20]
 - Remove quirks from priv

[8/20]
 - Call alienware_alienfx_exit if device_add_groups fails
 - Call device_remove_groups on .remove
 - Return ret on alienware_wmi_init()

[9/20]
 - Directly return create_thermal_profile in alienware_awcc_setup()
 - Assign priv on declaration in alienware_awcc_exit()

[10/20]
 - Fix alienware_wmi_command()

[13/20]
 - Rename x_series_features -> generic_quirks
 - Rename g_series_features -> g_series_quirks
 - Keep previous module parameter logic
 - Additionally rename *quirks -> *alienfx

[16/20]
 - Export *alienfx as an extern variable on alienware-wmi.h
 - Move pr_fmt to alienware-wmi.h

[17/20]
 - 2024 -> 2025

[20/20]
 - 2024 -> 2025

[*/20]
 - Add platform/x86 prefix to commit messages

v2: https://lore.kernel.org/platform-driver-x86/20241229194506.8268-2-kuurtb@gmail.com/

Kurt Borja (20):
  platform/x86: alienware-wmi: Remove unnecessary check at module exit
  platform/x86: alienware-wmi: Move Lighting Control State
  platform/x86: alienware-wmi: Modify parse_rgb() signature
  platform/x86: alienware-wmi: Improve hdmi_mux, amplifier and deepslp
    group creation
  platform/x86: alienware-wmi: Improve rgb-zones group creation
  platform/x86: alienware_wmi: General cleanup of WMAX methods
  platform/x86: alienware-wmi: Add a state container for LED control
    feature
  platform/x86: alienware-wmi: Add WMI Drivers
  platform/x86: alienware-wmi: Add a state container for thermal control
    methods
  platform/x86: alienware-wmi: Refactor LED control methods
  platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods
  platform/x86: alienware-wmi: Refactor thermal control methods
  platform/x86: alienware-wmi: Split DMI table
  MAINTAINERS: Update ALIENWARE WMI DRIVER entry
  platform/x86: Rename alienware-wmi.c
  platform/x86: Add alienware-wmi.h
  platform/x86: Split the alienware-wmi driver
  platform/x86: dell: Modify Makefile alignment
  platform/x86: Update alienware-wmi config entries
  platform/x86: alienware-wmi: Update header and module information

 MAINTAINERS                                   |    4 +-
 drivers/platform/x86/dell/Kconfig             |   30 +-
 drivers/platform/x86/dell/Makefile            |   45 +-
 .../platform/x86/dell/alienware-wmi-base.c    |  488 +++++++
 .../platform/x86/dell/alienware-wmi-legacy.c  |   98 ++
 .../platform/x86/dell/alienware-wmi-wmax.c    |  767 ++++++++++
 drivers/platform/x86/dell/alienware-wmi.c     | 1261 -----------------
 drivers/platform/x86/dell/alienware-wmi.h     |  104 ++
 8 files changed, 1509 insertions(+), 1288 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
 delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi.h


base-commit: 6b228cfc52a6e9b7149cf51e247076963d6561cd
-- 
2.47.1

[PATCH v3 01/20] platform/x86: alienware-wmi: Remove unnecessary check at module exit

[Kurt Borja]

Module initialization fails if platform device fails to register so it's
always not NULL at exit.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 7b3ee2d6a23d..7212d75396b9 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -1250,12 +1250,10 @@ module_init(alienware_wmi_init);
 
 static void __exit alienware_wmi_exit(void)
 {
-	if (platform_device) {
-		alienware_zone_exit(platform_device);
-		remove_hdmi(platform_device);
-		platform_device_unregister(platform_device);
-		platform_driver_unregister(&platform_driver);
-	}
+	alienware_zone_exit(platform_device);
+	remove_hdmi(platform_device);
+	platform_device_unregister(platform_device);
+	platform_driver_unregister(&platform_driver);
 }
 
 module_exit(alienware_wmi_exit);
-- 
2.47.1

[PATCH v3 02/20] platform/x86: alienware-wmi: Move Lighting Control State

[Kurt Borja]

Place Lighting Control State logic next to other attributes of the same
sysfs group.

While at it, rename:

store_control_state()	-> lighting_control_state_store()
show_control_state()	-> lighting_control_state_show()

Replace DEVICE_ATTR() with DEVICE_ATTR_RW() and do a general style
cleanup.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 74 ++++++++++++-----------
 1 file changed, 39 insertions(+), 35 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 7212d75396b9..ec64a8f22301 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -545,6 +545,45 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
 	return ret ? ret : count;
 }
 
+/*
+ * Lighting control state device attribute (Global)
+ */
+static ssize_t lighting_control_state_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	if (lighting_control_state == LEGACY_BOOTING)
+		return sysfs_emit(buf, "[booting] running suspend\n");
+	else if (lighting_control_state == LEGACY_SUSPEND)
+		return sysfs_emit(buf, "booting running [suspend]\n");
+
+	return sysfs_emit(buf, "booting [running] suspend\n");
+}
+
+static ssize_t lighting_control_state_store(struct device *dev,
+					    struct device_attribute *attr,
+					    const char *buf, size_t count)
+{
+	u8 val;
+
+	if (strcmp(buf, "booting\n") == 0)
+		val = LEGACY_BOOTING;
+	else if (strcmp(buf, "suspend\n") == 0)
+		val = LEGACY_SUSPEND;
+	else if (interface == LEGACY)
+		val = LEGACY_RUNNING;
+	else
+		val = WMAX_RUNNING;
+
+	lighting_control_state = val;
+	pr_debug("alienware-wmi: updated control state to %d\n",
+		 lighting_control_state);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(lighting_control_state);
+
 /*
  * LED Brightness (Global)
  */
@@ -589,41 +628,6 @@ static struct led_classdev global_led = {
 	.name = "alienware::global_brightness",
 };
 
-/*
- * Lighting control state device attribute (Global)
- */
-static ssize_t show_control_state(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	if (lighting_control_state == LEGACY_BOOTING)
-		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
-		return sysfs_emit(buf, "booting running [suspend]\n");
-	return sysfs_emit(buf, "booting [running] suspend\n");
-}
-
-static ssize_t store_control_state(struct device *dev,
-				   struct device_attribute *attr,
-				   const char *buf, size_t count)
-{
-	long unsigned int val;
-	if (strcmp(buf, "booting\n") == 0)
-		val = LEGACY_BOOTING;
-	else if (strcmp(buf, "suspend\n") == 0)
-		val = LEGACY_SUSPEND;
-	else if (interface == LEGACY)
-		val = LEGACY_RUNNING;
-	else
-		val = WMAX_RUNNING;
-	lighting_control_state = val;
-	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
-	return count;
-}
-
-static DEVICE_ATTR(lighting_control_state, 0644, show_control_state,
-		   store_control_state);
-
 static int alienware_zone_init(struct platform_device *dev)
 {
 	u8 zone;
-- 
2.47.1

[PATCH v3 03/20] platform/x86: alienware-wmi: Modify parse_rgb() signature

[Kurt Borja]

parse_rgb() now takes struct color_platform instead of struct
platform_zone to support upcoming refactor.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index ec64a8f22301..e54e3cc45691 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -434,7 +434,7 @@ static u8 global_brightness;
 /*
  * Helpers used for zone control
  */
-static int parse_rgb(const char *buf, struct platform_zone *zone)
+static int parse_rgb(const char *buf, struct color_platform *colors)
 {
 	long unsigned int rgb;
 	int ret;
@@ -454,7 +454,7 @@ static int parse_rgb(const char *buf, struct platform_zone *zone)
 	repackager.package = rgb & 0x0f0f0f0f;
 	pr_debug("alienware-wmi: r: %d g:%d b: %d\n",
 		 repackager.cp.red, repackager.cp.green, repackager.cp.blue);
-	zone->colors = repackager.cp;
+	*colors = repackager.cp;
 	return 0;
 }
 
@@ -538,7 +538,7 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
 		pr_err("alienware-wmi: invalid target zone\n");
 		return 1;
 	}
-	ret = parse_rgb(buf, target_zone);
+	ret = parse_rgb(buf, &target_zone->colors);
 	if (ret)
 		return ret;
 	ret = alienware_update_led(target_zone);
-- 
2.47.1

[PATCH v3 04/20] platform/x86: alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation

[Kurt Borja]

Devices with hdmi_mux, amplifier or deepslp quirks create a sysfs group
for each available feature. To accomplish this, helper create/remove
functions were called on module init, but they had the following
problems:

 - Create helpers called remove helpers on failure, which in turn tried
   to remove the sysfs group that failed to be created
 - If group creation failed mid way, previous successfully created groups
   were not cleaned up
 - Module exit only removed hdmi_mux group

To improve this, drop all helpers and let the platform driver manage these
sysfs groups, while controlling visibility with their respective quirks.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 114 ++++++++--------------
 1 file changed, 38 insertions(+), 76 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index e54e3cc45691..16a131cc9f11 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -417,12 +417,6 @@ static struct platform_zone *zone_data;
 static struct platform_profile_handler pp_handler;
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
-static struct platform_driver platform_driver = {
-	.driver = {
-		.name = "alienware-wmi",
-	}
-};
-
 static struct attribute_group zone_attribute_group = {
 	.name = "rgb_zones",
 };
@@ -804,6 +798,12 @@ static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
 static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
 		   toggle_hdmi_source);
 
+static bool hdmi_group_visible(struct kobject *kobj)
+{
+	return quirks->hdmi_mux;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
+
 static struct attribute *hdmi_attrs[] = {
 	&dev_attr_cable.attr,
 	&dev_attr_source.attr,
@@ -812,25 +812,10 @@ static struct attribute *hdmi_attrs[] = {
 
 static const struct attribute_group hdmi_attribute_group = {
 	.name = "hdmi",
+	.is_visible = SYSFS_GROUP_VISIBLE(hdmi),
 	.attrs = hdmi_attrs,
 };
 
-static void remove_hdmi(struct platform_device *dev)
-{
-	if (quirks->hdmi_mux > 0)
-		sysfs_remove_group(&dev->dev.kobj, &hdmi_attribute_group);
-}
-
-static int create_hdmi(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &hdmi_attribute_group);
-	if (ret)
-		remove_hdmi(dev);
-	return ret;
-}
-
 /*
  * Alienware GFX amplifier support
  * - Currently supports reading cable status
@@ -859,6 +844,12 @@ static ssize_t show_amplifier_status(struct device *dev,
 
 static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
 
+static bool amplifier_group_visible(struct kobject *kobj)
+{
+	return quirks->amplifier;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
+
 static struct attribute *amplifier_attrs[] = {
 	&dev_attr_status.attr,
 	NULL,
@@ -866,25 +857,10 @@ static struct attribute *amplifier_attrs[] = {
 
 static const struct attribute_group amplifier_attribute_group = {
 	.name = "amplifier",
+	.is_visible = SYSFS_GROUP_VISIBLE(amplifier),
 	.attrs = amplifier_attrs,
 };
 
-static void remove_amplifier(struct platform_device *dev)
-{
-	if (quirks->amplifier > 0)
-		sysfs_remove_group(&dev->dev.kobj, &amplifier_attribute_group);
-}
-
-static int create_amplifier(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &amplifier_attribute_group);
-	if (ret)
-		remove_amplifier(dev);
-	return ret;
-}
-
 /*
  * Deep Sleep Control support
  * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
@@ -937,6 +913,12 @@ static ssize_t toggle_deepsleep(struct device *dev,
 
 static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
 
+static bool deepsleep_group_visible(struct kobject *kobj)
+{
+	return quirks->deepslp;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
+
 static struct attribute *deepsleep_attrs[] = {
 	&dev_attr_deepsleep.attr,
 	NULL,
@@ -944,25 +926,10 @@ static struct attribute *deepsleep_attrs[] = {
 
 static const struct attribute_group deepsleep_attribute_group = {
 	.name = "deepsleep",
+	.is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
 	.attrs = deepsleep_attrs,
 };
 
-static void remove_deepsleep(struct platform_device *dev)
-{
-	if (quirks->deepslp > 0)
-		sysfs_remove_group(&dev->dev.kobj, &deepsleep_attribute_group);
-}
-
-static int create_deepsleep(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &deepsleep_attribute_group);
-	if (ret)
-		remove_deepsleep(dev);
-	return ret;
-}
-
 /*
  * Thermal Profile control
  *  - Provides thermal profile control through the Platform Profile API
@@ -1166,6 +1133,23 @@ static int create_thermal_profile(struct platform_device *platform_device)
 	return devm_platform_profile_register(&pp_handler);
 }
 
+/*
+ * Platform Driver
+ */
+static const struct attribute_group *alienfx_groups[] = {
+	&hdmi_attribute_group,
+	&amplifier_attribute_group,
+	&deepsleep_attribute_group,
+	NULL
+};
+
+static struct platform_driver platform_driver = {
+	.driver = {
+		.name = "alienware-wmi",
+		.dev_groups = alienfx_groups,
+	},
+};
+
 static int __init alienware_wmi_init(void)
 {
 	int ret;
@@ -1205,24 +1189,6 @@ static int __init alienware_wmi_init(void)
 	if (ret)
 		goto fail_platform_device2;
 
-	if (quirks->hdmi_mux > 0) {
-		ret = create_hdmi(platform_device);
-		if (ret)
-			goto fail_prep_hdmi;
-	}
-
-	if (quirks->amplifier > 0) {
-		ret = create_amplifier(platform_device);
-		if (ret)
-			goto fail_prep_amplifier;
-	}
-
-	if (quirks->deepslp > 0) {
-		ret = create_deepsleep(platform_device);
-		if (ret)
-			goto fail_prep_deepsleep;
-	}
-
 	if (quirks->thermal) {
 		ret = create_thermal_profile(platform_device);
 		if (ret)
@@ -1238,9 +1204,6 @@ static int __init alienware_wmi_init(void)
 fail_prep_zones:
 	alienware_zone_exit(platform_device);
 fail_prep_thermal_profile:
-fail_prep_deepsleep:
-fail_prep_amplifier:
-fail_prep_hdmi:
 	platform_device_del(platform_device);
 fail_platform_device2:
 	platform_device_put(platform_device);
@@ -1255,7 +1218,6 @@ module_init(alienware_wmi_init);
 static void __exit alienware_wmi_exit(void)
 {
 	alienware_zone_exit(platform_device);
-	remove_hdmi(platform_device);
 	platform_device_unregister(platform_device);
 	platform_driver_unregister(&platform_driver);
 }
-- 
2.47.1

[PATCH v3 05/20] platform/x86: alienware-wmi: Improve rgb-zones group creation

[Kurt Borja]

Define zone_attrs statically and initialize zone_attribute_group with
platform driver's .dev_groups.

Drop match_zone() and instead pass a `location` argument to previous
show/store methods to access the correct `zone` LED state. On top of
that rename zone_set() -> zone_store() to be more consistent with sysfs
conventions.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 212 +++++++++++-----------
 1 file changed, 105 insertions(+), 107 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 16a131cc9f11..418abf46b593 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -376,12 +376,6 @@ struct color_platform {
 	u8 red;
 } __packed;
 
-struct platform_zone {
-	u8 location;
-	struct device_attribute *attr;
-	struct color_platform colors;
-};
-
 struct wmax_brightness_args {
 	u32 led_mask;
 	u32 percentage;
@@ -411,16 +405,10 @@ struct wmax_u32_args {
 };
 
 static struct platform_device *platform_device;
-static struct device_attribute *zone_dev_attrs;
-static struct attribute **zone_attrs;
-static struct platform_zone *zone_data;
+static struct color_platform colors[4];
 static struct platform_profile_handler pp_handler;
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
-static struct attribute_group zone_attribute_group = {
-	.name = "rgb_zones",
-};
-
 static u8 interface;
 static u8 lighting_control_state;
 static u8 global_brightness;
@@ -452,24 +440,10 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
 	return 0;
 }
 
-static struct platform_zone *match_zone(struct device_attribute *attr)
-{
-	u8 zone;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		if ((struct device_attribute *)zone_data[zone].attr == attr) {
-			pr_debug("alienware-wmi: matched zone location: %d\n",
-				 zone_data[zone].location);
-			return &zone_data[zone];
-		}
-	}
-	return NULL;
-}
-
 /*
  * Individual RGB zone control
  */
-static int alienware_update_led(struct platform_zone *zone)
+static int alienware_update_led(u8 location)
 {
 	int method_id;
 	acpi_status status;
@@ -478,8 +452,8 @@ static int alienware_update_led(struct platform_zone *zone)
 	struct legacy_led_args legacy_args;
 	struct wmax_led_args wmax_basic_args;
 	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << zone->location;
-		wmax_basic_args.colors = zone->colors;
+		wmax_basic_args.led_mask = 1 << location;
+		wmax_basic_args.colors = colors[location];
 		wmax_basic_args.state = lighting_control_state;
 		guid = WMAX_CONTROL_GUID;
 		method_id = WMAX_METHOD_ZONE_CONTROL;
@@ -487,7 +461,7 @@ static int alienware_update_led(struct platform_zone *zone)
 		input.length = sizeof(wmax_basic_args);
 		input.pointer = &wmax_basic_args;
 	} else {
-		legacy_args.colors = zone->colors;
+		legacy_args.colors = colors[location];
 		legacy_args.brightness = global_brightness;
 		legacy_args.state = 0;
 		if (lighting_control_state == LEGACY_BOOTING ||
@@ -496,7 +470,7 @@ static int alienware_update_led(struct platform_zone *zone)
 			legacy_args.state = lighting_control_state;
 		} else
 			guid = LEGACY_CONTROL_GUID;
-		method_id = zone->location + 1;
+		method_id = location + 1;
 
 		input.length = sizeof(legacy_args);
 		input.pointer = &legacy_args;
@@ -510,35 +484,84 @@ static int alienware_update_led(struct platform_zone *zone)
 }
 
 static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
+			 char *buf, u8 location)
 {
-	struct platform_zone *target_zone;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL)
-		return sprintf(buf, "red: -1, green: -1, blue: -1\n");
 	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       target_zone->colors.red,
-		       target_zone->colors.green, target_zone->colors.blue);
+		       colors[location].red, colors[location].green,
+		       colors[location].blue);
 
 }
 
-static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
+static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count, u8 location)
 {
-	struct platform_zone *target_zone;
 	int ret;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL) {
-		pr_err("alienware-wmi: invalid target zone\n");
-		return 1;
-	}
-	ret = parse_rgb(buf, &target_zone->colors);
+
+	ret = parse_rgb(buf, &colors[location]);
 	if (ret)
 		return ret;
-	ret = alienware_update_led(target_zone);
+
+	ret = alienware_update_led(location);
+
 	return ret ? ret : count;
 }
 
+static ssize_t zone00_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	return zone_show(dev, attr, buf, 0);
+}
+
+static ssize_t zone00_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	return zone_store(dev, attr, buf, count, 0);
+}
+
+DEVICE_ATTR_RW(zone00);
+
+static ssize_t zone01_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	return zone_show(dev, attr, buf, 1);
+}
+
+static ssize_t zone01_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	return zone_store(dev, attr, buf, count, 1);
+}
+
+DEVICE_ATTR_RW(zone01);
+
+static ssize_t zone02_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	return zone_show(dev, attr, buf, 2);
+}
+
+static ssize_t zone02_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	return zone_store(dev, attr, buf, count, 2);
+}
+
+DEVICE_ATTR_RW(zone02);
+
+static ssize_t zone03_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	return zone_show(dev, attr, buf, 3);
+}
+
+static ssize_t zone03_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	return zone_store(dev, attr, buf, count, 3);
+}
+
+DEVICE_ATTR_RW(zone03);
+
 /*
  * Lighting control state device attribute (Global)
  */
@@ -578,6 +601,36 @@ static ssize_t lighting_control_state_store(struct device *dev,
 
 static DEVICE_ATTR_RW(lighting_control_state);
 
+static umode_t zone_attr_visible(struct kobject *kobj,
+				 struct attribute *attr, int n)
+{
+	if (n < quirks->num_zones + 1)
+		return attr->mode;
+
+	return 0;
+}
+
+static bool zone_group_visible(struct kobject *kobj)
+{
+	return quirks->num_zones > 0;
+}
+DEFINE_SYSFS_GROUP_VISIBLE(zone);
+
+static struct attribute *zone_attrs[] = {
+	&dev_attr_lighting_control_state.attr,
+	&dev_attr_zone00.attr,
+	&dev_attr_zone01.attr,
+	&dev_attr_zone02.attr,
+	&dev_attr_zone03.attr,
+	NULL
+};
+
+static struct attribute_group zone_attribute_group = {
+	.name = "rgb_zones",
+	.is_visible = SYSFS_GROUP_VISIBLE(zone),
+	.attrs = zone_attrs,
+};
+
 /*
  * LED Brightness (Global)
  */
@@ -606,7 +659,7 @@ static void global_led_set(struct led_classdev *led_cdev,
 	if (interface == WMAX)
 		ret = wmax_brightness(brightness);
 	else
-		ret = alienware_update_led(&zone_data[0]);
+		ret = alienware_update_led(0);
 	if (ret)
 		pr_err("LED brightness update failed\n");
 }
@@ -624,9 +677,6 @@ static struct led_classdev global_led = {
 
 static int alienware_zone_init(struct platform_device *dev)
 {
-	u8 zone;
-	char *name;
-
 	if (interface == WMAX) {
 		lighting_control_state = WMAX_RUNNING;
 	} else if (interface == LEGACY) {
@@ -635,65 +685,12 @@ static int alienware_zone_init(struct platform_device *dev)
 	global_led.max_brightness = 0x0F;
 	global_brightness = global_led.max_brightness;
 
-	/*
-	 *      - zone_dev_attrs num_zones + 1 is for individual zones and then
-	 *        null terminated
-	 *      - zone_attrs num_zones + 2 is for all attrs in zone_dev_attrs +
-	 *        the lighting control + null terminated
-	 *      - zone_data num_zones is for the distinct zones
-	 */
-	zone_dev_attrs =
-	    kcalloc(quirks->num_zones + 1, sizeof(struct device_attribute),
-		    GFP_KERNEL);
-	if (!zone_dev_attrs)
-		return -ENOMEM;
-
-	zone_attrs =
-	    kcalloc(quirks->num_zones + 2, sizeof(struct attribute *),
-		    GFP_KERNEL);
-	if (!zone_attrs)
-		return -ENOMEM;
-
-	zone_data =
-	    kcalloc(quirks->num_zones, sizeof(struct platform_zone),
-		    GFP_KERNEL);
-	if (!zone_data)
-		return -ENOMEM;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		name = kasprintf(GFP_KERNEL, "zone%02hhX", zone);
-		if (name == NULL)
-			return 1;
-		sysfs_attr_init(&zone_dev_attrs[zone].attr);
-		zone_dev_attrs[zone].attr.name = name;
-		zone_dev_attrs[zone].attr.mode = 0644;
-		zone_dev_attrs[zone].show = zone_show;
-		zone_dev_attrs[zone].store = zone_set;
-		zone_data[zone].location = zone;
-		zone_attrs[zone] = &zone_dev_attrs[zone].attr;
-		zone_data[zone].attr = &zone_dev_attrs[zone];
-	}
-	zone_attrs[quirks->num_zones] = &dev_attr_lighting_control_state.attr;
-	zone_attribute_group.attrs = zone_attrs;
-
-	led_classdev_register(&dev->dev, &global_led);
-
-	return sysfs_create_group(&dev->dev.kobj, &zone_attribute_group);
+	return led_classdev_register(&dev->dev, &global_led);
 }
 
 static void alienware_zone_exit(struct platform_device *dev)
 {
-	u8 zone;
-
-	sysfs_remove_group(&dev->dev.kobj, &zone_attribute_group);
 	led_classdev_unregister(&global_led);
-	if (zone_dev_attrs) {
-		for (zone = 0; zone < quirks->num_zones; zone++)
-			kfree(zone_dev_attrs[zone].attr.name);
-	}
-	kfree(zone_dev_attrs);
-	kfree(zone_data);
-	kfree(zone_attrs);
 }
 
 static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1137,6 +1134,7 @@ static int create_thermal_profile(struct platform_device *platform_device)
  * Platform Driver
  */
 static const struct attribute_group *alienfx_groups[] = {
+	&zone_attribute_group,
 	&hdmi_attribute_group,
 	&amplifier_attribute_group,
 	&deepsleep_attribute_group,
-- 
2.47.1

[PATCH v3 06/20] platform/x86: alienware_wmi: General cleanup of WMAX methods

[Kurt Borja]

Reorder variable declaration from longest to shortest. Standarize
show/store method names of WMAX's sysfs groups.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 67 +++++++++++------------
 1 file changed, 32 insertions(+), 35 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 418abf46b593..190fee7539bf 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -725,14 +725,14 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
  *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
  *	It can toggle between standard system GPU output and HDMI input.
  */
-static ssize_t show_hdmi_cable(struct device *dev,
-			       struct device_attribute *attr, char *buf)
+static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
 {
-	acpi_status status;
-	u32 out_data;
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
+	acpi_status status;
+	u32 out_data;
 	status =
 	    alienware_wmax_command(&in_args, sizeof(in_args),
 				   WMAX_METHOD_HDMI_CABLE, &out_data);
@@ -746,14 +746,14 @@ static ssize_t show_hdmi_cable(struct device *dev,
 	return sysfs_emit(buf, "unconnected connected [unknown]\n");
 }
 
-static ssize_t show_hdmi_source(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t source_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
 {
-	acpi_status status;
-	u32 out_data;
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
+	acpi_status status;
+	u32 out_data;
 	status =
 	    alienware_wmax_command(&in_args, sizeof(in_args),
 				   WMAX_METHOD_HDMI_STATUS, &out_data);
@@ -768,12 +768,11 @@ static ssize_t show_hdmi_source(struct device *dev,
 	return sysfs_emit(buf, "input gpu [unknown]\n");
 }
 
-static ssize_t toggle_hdmi_source(struct device *dev,
-				  struct device_attribute *attr,
-				  const char *buf, size_t count)
+static ssize_t source_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
 {
-	acpi_status status;
 	struct wmax_basic_args args;
+	acpi_status status;
 	if (strcmp(buf, "gpu\n") == 0)
 		args.arg = 1;
 	else if (strcmp(buf, "input\n") == 0)
@@ -791,9 +790,8 @@ static ssize_t toggle_hdmi_source(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
-static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
-		   toggle_hdmi_source);
+static DEVICE_ATTR_RO(cable);
+static DEVICE_ATTR_RW(source);
 
 static bool hdmi_group_visible(struct kobject *kobj)
 {
@@ -818,14 +816,14 @@ static const struct attribute_group hdmi_attribute_group = {
  * - Currently supports reading cable status
  * - Leaving expansion room to possibly support dock/undock events later
  */
-static ssize_t show_amplifier_status(struct device *dev,
-				     struct device_attribute *attr, char *buf)
+static ssize_t status_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
 {
-	acpi_status status;
-	u32 out_data;
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
+	acpi_status status;
+	u32 out_data;
 	status =
 	    alienware_wmax_command(&in_args, sizeof(in_args),
 				   WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
@@ -839,7 +837,7 @@ static ssize_t show_amplifier_status(struct device *dev,
 	return sysfs_emit(buf, "unconnected connected [unknown]\n");
 }
 
-static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
+static DEVICE_ATTR_RO(status);
 
 static bool amplifier_group_visible(struct kobject *kobj)
 {
@@ -862,14 +860,14 @@ static const struct attribute_group amplifier_attribute_group = {
  * Deep Sleep Control support
  * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
  */
-static ssize_t show_deepsleep_status(struct device *dev,
-				     struct device_attribute *attr, char *buf)
+static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
 {
-	acpi_status status;
-	u32 out_data;
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
+	acpi_status status;
+	u32 out_data;
 	status = alienware_wmax_command(&in_args, sizeof(in_args),
 					WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
 	if (ACPI_SUCCESS(status)) {
@@ -884,12 +882,11 @@ static ssize_t show_deepsleep_status(struct device *dev,
 	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
 }
 
-static ssize_t toggle_deepsleep(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf, size_t count)
+static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
 {
-	acpi_status status;
 	struct wmax_basic_args args;
+	acpi_status status;
 
 	if (strcmp(buf, "disabled\n") == 0)
 		args.arg = 0;
@@ -908,7 +905,7 @@ static ssize_t toggle_deepsleep(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
+static DEVICE_ATTR_RW(deepsleep);
 
 static bool deepsleep_group_visible(struct kobject *kobj)
 {
@@ -956,13 +953,13 @@ static bool is_wmax_thermal_code(u32 code)
 
 static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 {
-	acpi_status status;
 	struct wmax_u32_args in_args = {
 		.operation = operation,
 		.arg1 = arg,
 		.arg2 = 0,
 		.arg3 = 0,
 	};
+	acpi_status status;
 
 	status = alienware_wmax_command(&in_args, sizeof(in_args),
 					WMAX_METHOD_THERMAL_INFORMATION,
@@ -979,13 +976,13 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 
 static int wmax_thermal_control(u8 profile)
 {
-	acpi_status status;
 	struct wmax_u32_args in_args = {
 		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
 		.arg1 = profile,
 		.arg2 = 0,
 		.arg3 = 0,
 	};
+	acpi_status status;
 	u32 out_data;
 
 	status = alienware_wmax_command(&in_args, sizeof(in_args),
@@ -1003,13 +1000,13 @@ static int wmax_thermal_control(u8 profile)
 
 static int wmax_game_shift_status(u8 operation, u32 *out_data)
 {
-	acpi_status status;
 	struct wmax_u32_args in_args = {
 		.operation = operation,
 		.arg1 = 0,
 		.arg2 = 0,
 		.arg3 = 0,
 	};
+	acpi_status status;
 
 	status = alienware_wmax_command(&in_args, sizeof(in_args),
 					WMAX_METHOD_GAME_SHIFT_STATUS,
@@ -1078,11 +1075,11 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
 static int create_thermal_profile(struct platform_device *platform_device)
 {
-	u32 out_data;
+	enum platform_profile_option profile;
+	enum wmax_thermal_mode mode;
 	u8 sys_desc[4];
 	u32 first_mode;
-	enum wmax_thermal_mode mode;
-	enum platform_profile_option profile;
+	u32 out_data;
 	int ret;
 
 	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
-- 
2.47.1

[PATCH v3 07/20] platform/x86: alienware-wmi: Add a state container for LED control feature

[Kurt Borja]

Add a state container for the "alienware-wmi" platform device and
initialize it on the new alienfx_probe(). Migrate all LED control functions
to use this state container, as well as hdmi, amplifier, deepslp group
visibility methods, to support upcoming file split.

Additionally move the led_classdev registration to the platform driver
probe and make it device managed.

Drop alienware_zone_init() and alienware_zone_exit() because they are no
longer needed.

Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 119 ++++++++++++----------
 1 file changed, 67 insertions(+), 52 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 190fee7539bf..ca7b9f649541 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -404,14 +404,19 @@ struct wmax_u32_args {
 	u8 arg3;
 };
 
+struct alienfx_priv {
+	struct platform_device *pdev;
+	struct led_classdev global_led;
+	struct color_platform colors[4];
+	u8 global_brightness;
+	u8 lighting_control_state;
+};
+
 static struct platform_device *platform_device;
-static struct color_platform colors[4];
 static struct platform_profile_handler pp_handler;
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
 static u8 interface;
-static u8 lighting_control_state;
-static u8 global_brightness;
 
 /*
  * Helpers used for zone control
@@ -443,7 +448,7 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
 /*
  * Individual RGB zone control
  */
-static int alienware_update_led(u8 location)
+static int alienware_update_led(struct alienfx_priv *priv, u8 location)
 {
 	int method_id;
 	acpi_status status;
@@ -453,21 +458,21 @@ static int alienware_update_led(u8 location)
 	struct wmax_led_args wmax_basic_args;
 	if (interface == WMAX) {
 		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = colors[location];
-		wmax_basic_args.state = lighting_control_state;
+		wmax_basic_args.colors = priv->colors[location];
+		wmax_basic_args.state = priv->lighting_control_state;
 		guid = WMAX_CONTROL_GUID;
 		method_id = WMAX_METHOD_ZONE_CONTROL;
 
 		input.length = sizeof(wmax_basic_args);
 		input.pointer = &wmax_basic_args;
 	} else {
-		legacy_args.colors = colors[location];
-		legacy_args.brightness = global_brightness;
+		legacy_args.colors = priv->colors[location];
+		legacy_args.brightness = priv->global_brightness;
 		legacy_args.state = 0;
-		if (lighting_control_state == LEGACY_BOOTING ||
-		    lighting_control_state == LEGACY_SUSPEND) {
+		if (priv->lighting_control_state == LEGACY_BOOTING ||
+		    priv->lighting_control_state == LEGACY_SUSPEND) {
 			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = lighting_control_state;
+			legacy_args.state = priv->lighting_control_state;
 		} else
 			guid = LEGACY_CONTROL_GUID;
 		method_id = location + 1;
@@ -486,22 +491,26 @@ static int alienware_update_led(u8 location)
 static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
 			 char *buf, u8 location)
 {
+	struct alienfx_priv *priv = dev_get_drvdata(dev);
+	struct color_platform *colors = &priv->colors[location];
+
 	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       colors[location].red, colors[location].green,
-		       colors[location].blue);
+		       colors->red, colors->green, colors->blue);
 
 }
 
 static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count, u8 location)
 {
+	struct alienfx_priv *priv = dev_get_drvdata(dev);
+	struct color_platform *colors = &priv->colors[location];
 	int ret;
 
-	ret = parse_rgb(buf, &colors[location]);
+	ret = parse_rgb(buf, colors);
 	if (ret)
 		return ret;
 
-	ret = alienware_update_led(location);
+	ret = alienware_update_led(priv, location);
 
 	return ret ? ret : count;
 }
@@ -569,9 +578,11 @@ static ssize_t lighting_control_state_show(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	if (lighting_control_state == LEGACY_BOOTING)
+	struct alienfx_priv *priv = dev_get_drvdata(dev);
+
+	if (priv->lighting_control_state == LEGACY_BOOTING)
 		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
+	else if (priv->lighting_control_state == LEGACY_SUSPEND)
 		return sysfs_emit(buf, "booting running [suspend]\n");
 
 	return sysfs_emit(buf, "booting [running] suspend\n");
@@ -581,6 +592,7 @@ static ssize_t lighting_control_state_store(struct device *dev,
 					    struct device_attribute *attr,
 					    const char *buf, size_t count)
 {
+	struct alienfx_priv *priv = dev_get_drvdata(dev);
 	u8 val;
 
 	if (strcmp(buf, "booting\n") == 0)
@@ -592,9 +604,9 @@ static ssize_t lighting_control_state_store(struct device *dev,
 	else
 		val = WMAX_RUNNING;
 
-	lighting_control_state = val;
+	priv->lighting_control_state = val;
 	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
+		 priv->lighting_control_state);
 
 	return count;
 }
@@ -654,43 +666,26 @@ static int wmax_brightness(int brightness)
 static void global_led_set(struct led_classdev *led_cdev,
 			   enum led_brightness brightness)
 {
+	struct alienfx_priv *priv = container_of(led_cdev, struct alienfx_priv,
+						 global_led);
 	int ret;
-	global_brightness = brightness;
+
+	priv->global_brightness = brightness;
+
 	if (interface == WMAX)
 		ret = wmax_brightness(brightness);
 	else
-		ret = alienware_update_led(0);
+		ret = alienware_update_led(priv, 0);
 	if (ret)
 		pr_err("LED brightness update failed\n");
 }
 
 static enum led_brightness global_led_get(struct led_classdev *led_cdev)
 {
-	return global_brightness;
-}
+	struct alienfx_priv *priv = container_of(led_cdev, struct alienfx_priv,
+						 global_led);
 
-static struct led_classdev global_led = {
-	.brightness_set = global_led_set,
-	.brightness_get = global_led_get,
-	.name = "alienware::global_brightness",
-};
-
-static int alienware_zone_init(struct platform_device *dev)
-{
-	if (interface == WMAX) {
-		lighting_control_state = WMAX_RUNNING;
-	} else if (interface == LEGACY) {
-		lighting_control_state = LEGACY_RUNNING;
-	}
-	global_led.max_brightness = 0x0F;
-	global_brightness = global_led.max_brightness;
-
-	return led_classdev_register(&dev->dev, &global_led);
-}
-
-static void alienware_zone_exit(struct platform_device *dev)
-{
-	led_classdev_unregister(&global_led);
+	return priv->global_brightness;
 }
 
 static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1130,6 +1125,32 @@ static int create_thermal_profile(struct platform_device *platform_device)
 /*
  * Platform Driver
  */
+static int alienfx_probe(struct platform_device *pdev)
+{
+	struct alienfx_priv *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+	priv->pdev = pdev;
+
+	if (interface == WMAX)
+		priv->lighting_control_state = WMAX_RUNNING;
+	else if (interface == LEGACY)
+		priv->lighting_control_state = LEGACY_RUNNING;
+
+	priv->global_led.name = "alienware::global_brightness";
+	priv->global_led.brightness_set = global_led_set;
+	priv->global_led.brightness_get = global_led_get;
+	priv->global_led.max_brightness = 0x0F;
+
+	priv->global_brightness = priv->global_led.max_brightness;
+
+	return devm_led_classdev_register(&pdev->dev, &priv->global_led);
+}
+
 static const struct attribute_group *alienfx_groups[] = {
 	&zone_attribute_group,
 	&hdmi_attribute_group,
@@ -1143,6 +1164,7 @@ static struct platform_driver platform_driver = {
 		.name = "alienware-wmi",
 		.dev_groups = alienfx_groups,
 	},
+	.probe = alienfx_probe,
 };
 
 static int __init alienware_wmi_init(void)
@@ -1190,14 +1212,8 @@ static int __init alienware_wmi_init(void)
 			goto fail_prep_thermal_profile;
 	}
 
-	ret = alienware_zone_init(platform_device);
-	if (ret)
-		goto fail_prep_zones;
-
 	return 0;
 
-fail_prep_zones:
-	alienware_zone_exit(platform_device);
 fail_prep_thermal_profile:
 	platform_device_del(platform_device);
 fail_platform_device2:
@@ -1212,7 +1228,6 @@ module_init(alienware_wmi_init);
 
 static void __exit alienware_wmi_exit(void)
 {
-	alienware_zone_exit(platform_device);
 	platform_device_unregister(platform_device);
 	platform_driver_unregister(&platform_driver);
 }
-- 
2.47.1

[PATCH v3 08/20] platform/x86: alienware-wmi: Add WMI Drivers

[Kurt Borja]

Add WMI drivers for LEGACY and WMAX devices.

This involves moving platform driver and device registration to a helper
function, which is now called from the driver's preferred WMI device
driver probe. However this is only done if !quirks->thermal because
newer WMAX interface doesn't support any of the features exposed by this
device.

Only one driver is registered on module initialization to prevent
registering duplicate platform driver and device.

Additionally, create_thermal_profile() now takes wmi_device * instead of
platform_device *.

Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 200 +++++++++++++++++-----
 1 file changed, 160 insertions(+), 40 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index ca7b9f649541..d7b322be6c19 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -15,6 +15,7 @@
 #include <linux/platform_profile.h>
 #include <linux/dmi.h>
 #include <linux/leds.h>
+#include <linux/wmi.h>
 
 #define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
 #define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
@@ -39,8 +40,6 @@
 MODULE_AUTHOR("Mario Limonciello <mario.limonciello@outlook.com>");
 MODULE_DESCRIPTION("Alienware special feature control");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("wmi:" LEGACY_CONTROL_GUID);
-MODULE_ALIAS("wmi:" WMAX_CONTROL_GUID);
 
 static bool force_platform_profile;
 module_param_unsafe(force_platform_profile, bool, 0);
@@ -412,7 +411,10 @@ struct alienfx_priv {
 	u8 lighting_control_state;
 };
 
-static struct platform_device *platform_device;
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+};
+
 static struct platform_profile_handler pp_handler;
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
@@ -1068,7 +1070,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 	return wmax_thermal_control(supported_thermal_profiles[profile]);
 }
 
-static int create_thermal_profile(struct platform_device *platform_device)
+static int create_thermal_profile(struct wmi_device *wdev)
 {
 	enum platform_profile_option profile;
 	enum wmax_thermal_mode mode;
@@ -1117,7 +1119,7 @@ static int create_thermal_profile(struct platform_device *platform_device)
 	pp_handler.profile_get = thermal_profile_get;
 	pp_handler.profile_set = thermal_profile_set;
 	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &platform_device->dev;
+	pp_handler.dev = &wdev->dev;
 
 	return devm_platform_profile_register(&pp_handler);
 }
@@ -1153,6 +1155,10 @@ static int alienfx_probe(struct platform_device *pdev)
 
 static const struct attribute_group *alienfx_groups[] = {
 	&zone_attribute_group,
+	NULL
+};
+
+static const struct attribute_group *wmax_alienfx_groups[] = {
 	&hdmi_attribute_group,
 	&amplifier_attribute_group,
 	&deepsleep_attribute_group,
@@ -1167,19 +1173,150 @@ static struct platform_driver platform_driver = {
 	.probe = alienfx_probe,
 };
 
-static int __init alienware_wmi_init(void)
+static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 {
+	struct platform_device *pdev;
 	int ret;
 
-	if (wmi_has_guid(LEGACY_CONTROL_GUID))
-		interface = LEGACY;
-	else if (wmi_has_guid(WMAX_CONTROL_GUID))
-		interface = WMAX;
-	else {
-		pr_warn("alienware-wmi: No known WMI GUID found\n");
-		return -ENODEV;
+	ret = platform_driver_register(&platform_driver);
+	if (ret < 0)
+		return ret;
+
+	pdev = platform_device_register_data(NULL, "alienware-wmi",
+					     PLATFORM_DEVID_NONE, pdata,
+					     sizeof(*pdata));
+
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&platform_driver);
+		return PTR_ERR(pdev);
 	}
 
+	dev_set_drvdata(&pdata->wdev->dev, pdev);
+
+	return 0;
+}
+
+static void alienware_alienfx_exit(struct wmi_device *wdev)
+{
+	struct platform_device *pdev = dev_get_drvdata(&wdev->dev);
+
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&platform_driver);
+}
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static void legacy_wmi_remove(struct wmi_device *wdev)
+{
+	alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.remove = legacy_wmi_remove,
+};
+
+static int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+static void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+	struct platform_device *pdev;
+	int ret;
+
+	if (quirks->thermal) {
+		return create_thermal_profile(wdev);
+	} else {
+		ret = alienware_alienfx_setup(&pdata);
+		if (ret < 0)
+			return ret;
+
+		pdev = dev_get_drvdata(&wdev->dev);
+
+		ret = device_add_groups(&pdev->dev, wmax_alienfx_groups);
+		if (ret < 0)
+			alienware_alienfx_exit(wdev);
+
+		return ret;
+	}
+}
+
+static void wmax_wmi_remove(struct wmi_device *wdev)
+{
+	struct platform_device *pdev;
+
+	if (!quirks->thermal) {
+		pdev = dev_get_drvdata(&wdev->dev);
+
+		device_remove_groups(&pdev->dev, wmax_alienfx_groups);
+		alienware_alienfx_exit(wdev);
+	}
+}
+
+static struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.remove = wmax_wmi_remove,
+};
+
+static int __init alienware_wmax_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+static void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
+
+static int __init alienware_wmi_init(void)
+{
+	int ret;
+
 	dmi_check_system(alienware_quirks);
 	if (quirks == NULL)
 		quirks = &quirk_unknown;
@@ -1194,33 +1331,14 @@ static int __init alienware_wmi_init(void)
 			pr_warn("force_gmode requires platform profile support\n");
 	}
 
-	ret = platform_driver_register(&platform_driver);
-	if (ret)
-		goto fail_platform_driver;
-	platform_device = platform_device_alloc("alienware-wmi", PLATFORM_DEVID_NONE);
-	if (!platform_device) {
-		ret = -ENOMEM;
-		goto fail_platform_device1;
-	}
-	ret = platform_device_add(platform_device);
-	if (ret)
-		goto fail_platform_device2;
-
-	if (quirks->thermal) {
-		ret = create_thermal_profile(platform_device);
-		if (ret)
-			goto fail_prep_thermal_profile;
+	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
+		interface = WMAX;
+		ret = alienware_wmax_wmi_init();
+	} else {
+		interface = LEGACY;
+		ret = alienware_legacy_wmi_init();
 	}
 
-	return 0;
-
-fail_prep_thermal_profile:
-	platform_device_del(platform_device);
-fail_platform_device2:
-	platform_device_put(platform_device);
-fail_platform_device1:
-	platform_driver_unregister(&platform_driver);
-fail_platform_driver:
 	return ret;
 }
 
@@ -1228,8 +1346,10 @@ module_init(alienware_wmi_init);
 
 static void __exit alienware_wmi_exit(void)
 {
-	platform_device_unregister(platform_device);
-	platform_driver_unregister(&platform_driver);
+	if (interface == WMAX)
+		alienware_wmax_wmi_exit();
+	else
+		alienware_legacy_wmi_exit();
 }
 
 module_exit(alienware_wmi_exit);
-- 
2.47.1

[PATCH v3 09/20] platform/x86: alienware-wmi: Add a state container for thermal control methods

[Kurt Borja]

Refactor all thermal control methods to use the newly defined awcc_priv
state container instead of global variables.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 50 ++++++++++++++++-------
 1 file changed, 35 insertions(+), 15 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index d7b322be6c19..da8a9592b1da 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -403,6 +403,12 @@ struct wmax_u32_args {
 	u8 arg3;
 };
 
+struct awcc_priv {
+	struct wmi_device *wdev;
+	struct platform_profile_handler pp_handler;
+	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+};
+
 struct alienfx_priv {
 	struct platform_device *pdev;
 	struct led_classdev global_led;
@@ -415,9 +421,6 @@ struct alienfx_platdata {
 	struct wmi_device *wdev;
 };
 
-static struct platform_profile_handler pp_handler;
-static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-
 static u8 interface;
 
 /*
@@ -1047,6 +1050,8 @@ static int thermal_profile_get(struct platform_profile_handler *pprof,
 static int thermal_profile_set(struct platform_profile_handler *pprof,
 			       enum platform_profile_option profile)
 {
+	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
+
 	if (quirks->gmode) {
 		u32 gmode_status;
 		int ret;
@@ -1067,11 +1072,12 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 		}
 	}
 
-	return wmax_thermal_control(supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
 }
 
 static int create_thermal_profile(struct wmi_device *wdev)
 {
+	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
 	enum platform_profile_option profile;
 	enum wmax_thermal_mode mode;
 	u8 sys_desc[4];
@@ -1101,27 +1107,41 @@ static int create_thermal_profile(struct wmi_device *wdev)
 
 		mode = out_data & WMAX_THERMAL_MODE_MASK;
 		profile = wmax_mode_to_platform_profile[mode];
-		supported_thermal_profiles[profile] = out_data;
+		priv->supported_thermal_profiles[profile] = out_data;
 
-		set_bit(profile, pp_handler.choices);
+		set_bit(profile, priv->pp_handler.choices);
 	}
 
-	if (bitmap_empty(pp_handler.choices, PLATFORM_PROFILE_LAST))
+	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
 		return -ENODEV;
 
 	if (quirks->gmode) {
-		supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
 			WMAX_THERMAL_MODE_GMODE;
 
-		set_bit(PLATFORM_PROFILE_PERFORMANCE, pp_handler.choices);
+		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
 	}
 
-	pp_handler.profile_get = thermal_profile_get;
-	pp_handler.profile_set = thermal_profile_set;
-	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &wdev->dev;
+	priv->pp_handler.profile_get = thermal_profile_get;
+	priv->pp_handler.profile_set = thermal_profile_set;
+	priv->pp_handler.name = "alienware-wmi";
+	priv->pp_handler.dev = &wdev->dev;
+
+	return devm_platform_profile_register(&priv->pp_handler);
+}
+
+static int alienware_awcc_setup(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv;
+
+	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(&wdev->dev, priv);
+	priv->wdev = wdev;
 
-	return devm_platform_profile_register(&pp_handler);
+	return create_thermal_profile(wdev);
 }
 
 /*
@@ -1259,7 +1279,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 	int ret;
 
 	if (quirks->thermal) {
-		return create_thermal_profile(wdev);
+		return alienware_awcc_setup(wdev);
 	} else {
 		ret = alienware_alienfx_setup(&pdata);
 		if (ret < 0)
-- 
2.47.1

[PATCH v3 10/20] platform/x86: alienware-wmi: Refactor LED control methods

[Kurt Borja]

Both WMI devices handled by this module specify a distinct interface for
LED control. Previously this module handled this by dynamically adapting
arguments passed to wmi_evaluate_method() based on the `interface`
global variable.

To avoid the use of global variables, and enable the migration to
non-deprecated WMI methods, let the WMI drivers define upd_led and
upd_brightness operations, which completely replace
alienware_update_led() and wmax_brightness().

Also define alienware_wmi_command(), which serves as a wrapper for
wmidev_evaluate_method(). This new method is very similar to
alienware_wmax_command() but is WMI device agnostic.

Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 164 ++++++++++++++--------
 1 file changed, 102 insertions(+), 62 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index da8a9592b1da..ffedb01e81d2 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -417,12 +417,42 @@ struct alienfx_priv {
 	u8 lighting_control_state;
 };
 
+struct alienfx_ops {
+	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
+		       u8 location);
+	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
+			      u8 brightness);
+};
+
 struct alienfx_platdata {
 	struct wmi_device *wdev;
+	struct alienfx_ops ops;
 };
 
 static u8 interface;
 
+static int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+				 void *in_args, size_t in_size, u32 *out_data)
+{
+	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_buffer in = {in_size, in_args};
+	union acpi_object *obj;
+	acpi_status ret;
+
+	ret = wmidev_evaluate_method(wdev, 0, method_id, &in, out_data ? &out : NULL);
+	if (ACPI_FAILURE(ret))
+		return -EIO;
+
+	obj = out.pointer;
+
+	if (out_data && obj && obj->type == ACPI_TYPE_INTEGER)
+		*out_data = (u32)obj->integer.value;
+
+	kfree(obj);
+
+	return 0;
+}
+
 /*
  * Helpers used for zone control
  */
@@ -453,46 +483,6 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
 /*
  * Individual RGB zone control
  */
-static int alienware_update_led(struct alienfx_priv *priv, u8 location)
-{
-	int method_id;
-	acpi_status status;
-	char *guid;
-	struct acpi_buffer input;
-	struct legacy_led_args legacy_args;
-	struct wmax_led_args wmax_basic_args;
-	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = priv->colors[location];
-		wmax_basic_args.state = priv->lighting_control_state;
-		guid = WMAX_CONTROL_GUID;
-		method_id = WMAX_METHOD_ZONE_CONTROL;
-
-		input.length = sizeof(wmax_basic_args);
-		input.pointer = &wmax_basic_args;
-	} else {
-		legacy_args.colors = priv->colors[location];
-		legacy_args.brightness = priv->global_brightness;
-		legacy_args.state = 0;
-		if (priv->lighting_control_state == LEGACY_BOOTING ||
-		    priv->lighting_control_state == LEGACY_SUSPEND) {
-			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = priv->lighting_control_state;
-		} else
-			guid = LEGACY_CONTROL_GUID;
-		method_id = location + 1;
-
-		input.length = sizeof(legacy_args);
-		input.pointer = &legacy_args;
-	}
-	pr_debug("alienware-wmi: guid %s method %d\n", guid, method_id);
-
-	status = wmi_evaluate_method(guid, 0, method_id, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: zone set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
 static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
 			 char *buf, u8 location)
 {
@@ -509,13 +499,14 @@ static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
 {
 	struct alienfx_priv *priv = dev_get_drvdata(dev);
 	struct color_platform *colors = &priv->colors[location];
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	int ret;
 
 	ret = parse_rgb(buf, colors);
 	if (ret)
 		return ret;
 
-	ret = alienware_update_led(priv, location);
+	ret = pdata->ops.upd_led(priv, pdata->wdev, location);
 
 	return ret ? ret : count;
 }
@@ -651,36 +642,17 @@ static struct attribute_group zone_attribute_group = {
 /*
  * LED Brightness (Global)
  */
-static int wmax_brightness(int brightness)
-{
-	acpi_status status;
-	struct acpi_buffer input;
-	struct wmax_brightness_args args = {
-		.led_mask = 0xFF,
-		.percentage = brightness,
-	};
-	input.length = sizeof(args);
-	input.pointer = &args;
-	status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-				     WMAX_METHOD_BRIGHTNESS, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: brightness set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
 static void global_led_set(struct led_classdev *led_cdev,
 			   enum led_brightness brightness)
 {
 	struct alienfx_priv *priv = container_of(led_cdev, struct alienfx_priv,
 						 global_led);
+	struct alienfx_platdata *pdata = dev_get_platdata(&priv->pdev->dev);
 	int ret;
 
 	priv->global_brightness = brightness;
 
-	if (interface == WMAX)
-		ret = wmax_brightness(brightness);
-	else
-		ret = alienware_update_led(priv, 0);
+	ret = pdata->ops.upd_brightness(priv, pdata->wdev, brightness);
 	if (ret)
 		pr_err("LED brightness update failed\n");
 }
@@ -1227,10 +1199,49 @@ static void alienware_alienfx_exit(struct wmi_device *wdev)
 /*
  * Legacy WMI driver
  */
+static int legacy_wmi_update_led(struct alienfx_priv *priv,
+				 struct wmi_device *wdev, u8 location)
+{
+	struct legacy_led_args legacy_args = {
+		.colors = priv->colors[location],
+		.brightness = priv->global_brightness,
+		.state = 0,
+	};
+	struct acpi_buffer input;
+	acpi_status status;
+
+	if (legacy_args.state != LEGACY_RUNNING) {
+		legacy_args.state = priv->lighting_control_state;
+
+		input.length = sizeof(legacy_args);
+		input.pointer = &legacy_args;
+
+		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
+					     location + 1, &input, NULL);
+		if (ACPI_FAILURE(status))
+			return -EIO;
+
+		return 0;
+	}
+
+	return alienware_wmi_command(wdev, location + 1, &legacy_args,
+				     sizeof(legacy_args), NULL);
+}
+
+static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
+					struct wmi_device *wdev, u8 brightness)
+{
+	return legacy_wmi_update_led(priv, wdev, 0);
+}
+
 static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
 {
 	struct alienfx_platdata pdata = {
 		.wdev = wdev,
+		.ops = {
+			.upd_led = legacy_wmi_update_led,
+			.upd_brightness = legacy_wmi_update_brightness,
+		},
 	};
 
 	return alienware_alienfx_setup(&pdata);
@@ -1270,10 +1281,39 @@ static void __exit alienware_legacy_wmi_exit(void)
 /*
  * WMAX WMI driver
  */
+static int wmax_wmi_update_led(struct alienfx_priv *priv,
+			       struct wmi_device *wdev, u8 location)
+{
+	struct wmax_led_args in_args = {
+		.led_mask = 1 << location,
+		.colors = priv->colors[location],
+		.state = priv->lighting_control_state,
+	};
+
+	return alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL, &in_args,
+				     sizeof(in_args), NULL);
+}
+
+static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
+				      struct wmi_device *wdev, u8 brightness)
+{
+	struct wmax_brightness_args in_args = {
+		.led_mask = 0xFF,
+		.percentage = brightness,
+	};
+
+	return alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
+				     sizeof(in_args), NULL);
+}
+
 static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 {
 	struct alienfx_platdata pdata = {
 		.wdev = wdev,
+		.ops = {
+			.upd_led = wmax_wmi_update_led,
+			.upd_brightness = wmax_wmi_update_brightness,
+		},
 	};
 	struct platform_device *pdev;
 	int ret;
-- 
2.47.1

[PATCH v3 11/20] platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods

[Kurt Borja]

Refactor show/store methods for hdmi, amplifier, deepslp sysfs groups to
use alienware_wmi_command() instead of alienware_wmax_command() which
uses deprecated WMI methods.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 85 +++++++++++++----------
 1 file changed, 50 insertions(+), 35 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index ffedb01e81d2..5918750a3bb1 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -700,51 +700,58 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
 static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	acpi_status status;
 	u32 out_data;
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_HDMI_CABLE, &out_data);
-	if (ACPI_SUCCESS(status)) {
+	int ret;
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[unconnected] connected unknown\n");
 		else if (out_data == 1)
 			return sysfs_emit(buf, "unconnected [connected] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown HDMI cable status: %d\n", status);
+
+	pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret);
 	return sysfs_emit(buf, "unconnected connected [unknown]\n");
 }
 
 static ssize_t source_show(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	acpi_status status;
 	u32 out_data;
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_HDMI_STATUS, &out_data);
+	int ret;
 
-	if (ACPI_SUCCESS(status)) {
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
 		if (out_data == 1)
 			return sysfs_emit(buf, "[input] gpu unknown\n");
 		else if (out_data == 2)
 			return sysfs_emit(buf, "input [gpu] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown HDMI source status: %u\n", status);
+
+	pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret);
 	return sysfs_emit(buf, "input gpu [unknown]\n");
 }
 
 static ssize_t source_store(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args args;
-	acpi_status status;
+	int ret;
+
 	if (strcmp(buf, "gpu\n") == 0)
 		args.arg = 1;
 	else if (strcmp(buf, "input\n") == 0)
@@ -753,12 +760,12 @@ static ssize_t source_store(struct device *dev, struct device_attribute *attr,
 		args.arg = 3;
 	pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
 
-	status = alienware_wmax_command(&args, sizeof(args),
-					WMAX_METHOD_HDMI_SOURCE, NULL);
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE, &args,
+				    sizeof(args), NULL);
+
+	if (ret < 0)
+		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret);
 
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n",
-		       status);
 	return count;
 }
 
@@ -791,21 +798,24 @@ static const struct attribute_group hdmi_attribute_group = {
 static ssize_t status_show(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	acpi_status status;
 	u32 out_data;
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
-	if (ACPI_SUCCESS(status)) {
+	int ret;
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[unconnected] connected unknown\n");
 		else if (out_data == 1)
 			return sysfs_emit(buf, "unconnected [connected] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown amplifier cable status: %d\n", status);
+
+	pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret);
 	return sysfs_emit(buf, "unconnected connected [unknown]\n");
 }
 
@@ -835,14 +845,17 @@ static const struct attribute_group amplifier_attribute_group = {
 static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
 			      char *buf)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	acpi_status status;
 	u32 out_data;
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
-	if (ACPI_SUCCESS(status)) {
+	int ret;
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
 		else if (out_data == 1)
@@ -850,15 +863,17 @@ static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
 		else if (out_data == 2)
 			return sysfs_emit(buf, "disabled s5 [s5_s4]\n");
 	}
-	pr_err("alienware-wmi: unknown deep sleep status: %d\n", status);
+
+	pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret);
 	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
 }
 
 static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args args;
-	acpi_status status;
+	int ret;
 
 	if (strcmp(buf, "disabled\n") == 0)
 		args.arg = 0;
@@ -868,12 +883,12 @@ static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr
 		args.arg = 2;
 	pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
 
-	status = alienware_wmax_command(&args, sizeof(args),
-					WMAX_METHOD_DEEP_SLEEP_CONTROL, NULL);
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
+				    &args, sizeof(args), NULL);
+
+	if (!ret)
+		pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret);
 
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: deep sleep control failed: results: %u\n",
-			status);
 	return count;
 }
 
-- 
2.47.1

[PATCH v3 12/20] platform/x86: alienware-wmi: Refactor thermal control methods

[Kurt Borja]

Refactor thermal control methods to use alienware_wmi_command() instead
of alienware_wmax_command().

Drop alienware_wmax_command() as there is no more users left.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 87 ++++++++---------------
 1 file changed, 30 insertions(+), 57 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 5918750a3bb1..c75ad7ef3d54 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -665,34 +665,6 @@ static enum led_brightness global_led_get(struct led_classdev *led_cdev)
 	return priv->global_brightness;
 }
 
-static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
-					  u32 command, u32 *out_data)
-{
-	acpi_status status;
-	union acpi_object *obj;
-	struct acpi_buffer input;
-	struct acpi_buffer output;
-
-	input.length = in_size;
-	input.pointer = in_args;
-	if (out_data) {
-		output.length = ACPI_ALLOCATE_BUFFER;
-		output.pointer = NULL;
-		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-					     command, &input, &output);
-		if (ACPI_SUCCESS(status)) {
-			obj = (union acpi_object *)output.pointer;
-			if (obj && obj->type == ACPI_TYPE_INTEGER)
-				*out_data = (u32)obj->integer.value;
-		}
-		kfree(output.pointer);
-	} else {
-		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-					     command, &input, NULL);
-	}
-	return status;
-}
-
 /*
  *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
  *	It can toggle between standard system GPU output and HDMI input.
@@ -938,7 +910,8 @@ static bool is_wmax_thermal_code(u32 code)
 	return false;
 }
 
-static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
+static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
+				    u8 arg, u32 *out_data)
 {
 	struct wmax_u32_args in_args = {
 		.operation = operation,
@@ -946,14 +919,12 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 		.arg2 = 0,
 		.arg3 = 0,
 	};
-	acpi_status status;
-
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_THERMAL_INFORMATION,
-					out_data);
+	int ret;
 
-	if (ACPI_FAILURE(status))
-		return -EIO;
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
+				    &in_args, sizeof(in_args), out_data);
+	if (ret < 0)
+		return ret;
 
 	if (*out_data == WMAX_FAILURE_CODE)
 		return -EBADRQC;
@@ -961,7 +932,7 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 	return 0;
 }
 
-static int wmax_thermal_control(u8 profile)
+static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
 {
 	struct wmax_u32_args in_args = {
 		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
@@ -969,15 +940,13 @@ static int wmax_thermal_control(u8 profile)
 		.arg2 = 0,
 		.arg3 = 0,
 	};
-	acpi_status status;
 	u32 out_data;
+	int ret;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_THERMAL_CONTROL,
-					&out_data);
-
-	if (ACPI_FAILURE(status))
-		return -EIO;
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
+				    &in_args, sizeof(in_args), &out_data);
+	if (ret)
+		return ret;
 
 	if (out_data == WMAX_FAILURE_CODE)
 		return -EBADRQC;
@@ -985,7 +954,8 @@ static int wmax_thermal_control(u8 profile)
 	return 0;
 }
 
-static int wmax_game_shift_status(u8 operation, u32 *out_data)
+static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
+				  u32 *out_data)
 {
 	struct wmax_u32_args in_args = {
 		.operation = operation,
@@ -993,14 +963,13 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
 		.arg2 = 0,
 		.arg3 = 0,
 	};
-	acpi_status status;
+	int ret;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_GAME_SHIFT_STATUS,
-					out_data);
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
+				    &in_args, sizeof(in_args), out_data);
 
-	if (ACPI_FAILURE(status))
-		return -EIO;
+	if (ret < 0)
+		return ret;
 
 	if (*out_data == WMAX_FAILURE_CODE)
 		return -EOPNOTSUPP;
@@ -1011,10 +980,11 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
 static int thermal_profile_get(struct platform_profile_handler *pprof,
 			       enum platform_profile_option *profile)
 {
+	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
 	u32 out_data;
 	int ret;
 
-	ret = wmax_thermal_information(WMAX_OPERATION_CURRENT_PROFILE,
+	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
 				       0, &out_data);
 
 	if (ret < 0)
@@ -1043,7 +1013,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 		u32 gmode_status;
 		int ret;
 
-		ret = wmax_game_shift_status(WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
+		ret = wmax_game_shift_status(priv->wdev,
+					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
 					     &gmode_status);
 
 		if (ret < 0)
@@ -1051,7 +1022,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
 		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
 		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
-			ret = wmax_game_shift_status(WMAX_OPERATION_TOGGLE_GAME_SHIFT,
+			ret = wmax_game_shift_status(priv->wdev,
+						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
 						     &gmode_status);
 
 			if (ret < 0)
@@ -1059,7 +1031,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 		}
 	}
 
-	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->wdev,
+				    priv->supported_thermal_profiles[profile]);
 }
 
 static int create_thermal_profile(struct wmi_device *wdev)
@@ -1072,7 +1045,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
 	u32 out_data;
 	int ret;
 
-	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
+	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
 				       0, (u32 *) &sys_desc);
 	if (ret < 0)
 		return ret;
@@ -1080,7 +1053,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
 	first_mode = sys_desc[0] + sys_desc[1];
 
 	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = wmax_thermal_information(WMAX_OPERATION_LIST_IDS,
+		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
 					       i + first_mode, &out_data);
 
 		if (ret == -EIO)
-- 
2.47.1

[PATCH v3 13/20] platform/x86: alienware-wmi: Split DMI table

[Kurt Borja]

Split thermal features into a new DMI table to support upcoming file
split. While at it:

Rename quirk_entry -> alienfx_features,
Rename quirks -> alienfx

and change hdmi_mux, amplifier and deepslp types to bool, because they are
already being implicitly used as bools.

Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi.c | 337 ++++++++++------------
 1 file changed, 158 insertions(+), 179 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index c75ad7ef3d54..e2fcb95b506c 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -113,102 +113,68 @@ static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_
 	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
 };
 
-struct quirk_entry {
+struct alienfx_quirks {
 	u8 num_zones;
-	u8 hdmi_mux;
-	u8 amplifier;
-	u8 deepslp;
-	bool thermal;
-	bool gmode;
+	bool hdmi_mux;
+	bool amplifier;
+	bool deepslp;
 };
 
-static struct quirk_entry *quirks;
+static struct alienfx_quirks *alienfx;
 
 
-static struct quirk_entry quirk_inspiron5675 = {
+static struct alienfx_quirks quirk_inspiron5675 = {
 	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = false,
+	.amplifier = false,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_unknown = {
+static struct alienfx_quirks quirk_unknown = {
 	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = false,
+	.amplifier = false,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_x51_r1_r2 = {
+static struct alienfx_quirks quirk_x51_r1_r2 = {
 	.num_zones = 3,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = false,
+	.amplifier = false,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_x51_r3 = {
+static struct alienfx_quirks quirk_x51_r3 = {
 	.num_zones = 4,
-	.hdmi_mux = 0,
-	.amplifier = 1,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = false,
+	.amplifier = true,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_asm100 = {
+static struct alienfx_quirks quirk_asm100 = {
 	.num_zones = 2,
-	.hdmi_mux = 1,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = true,
+	.amplifier = false,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_asm200 = {
+static struct alienfx_quirks quirk_asm200 = {
 	.num_zones = 2,
-	.hdmi_mux = 1,
-	.amplifier = 0,
-	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = true,
+	.amplifier = false,
+	.deepslp = true,
 };
 
-static struct quirk_entry quirk_asm201 = {
+static struct alienfx_quirks quirk_asm201 = {
 	.num_zones = 2,
-	.hdmi_mux = 1,
-	.amplifier = 1,
-	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
-};
-
-static struct quirk_entry quirk_g_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = true,
-};
-
-static struct quirk_entry quirk_x_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = false,
+	.hdmi_mux = true,
+	.amplifier = true,
+	.deepslp = true,
 };
 
 static int __init dmi_matched(const struct dmi_system_id *dmi)
 {
-	quirks = dmi->driver_data;
+	alienfx = dmi->driver_data;
 	return 1;
 }
 
@@ -240,42 +206,6 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
 		},
 		.driver_data = &quirk_asm201,
 	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware m17 R5",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
-		},
-		.driver_data = &quirk_x_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware m18 R2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
-		},
-		.driver_data = &quirk_x_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware x15 R1",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
-		},
-		.driver_data = &quirk_x_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware x17 R2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
-		},
-		.driver_data = &quirk_x_series,
-	},
 	{
 		.callback = dmi_matched,
 		.ident = "Alienware X51 R1",
@@ -303,60 +233,6 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
 		},
 		.driver_data = &quirk_x51_r3,
 	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G15 5510",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G15 5511",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G15 5515",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G3 3500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G3 3590",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G5 5500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
-		},
-		.driver_data = &quirk_g_series,
-	},
 	{
 		.callback = dmi_matched,
 		.ident = "Dell Inc. Inspiron 5675",
@@ -431,6 +307,103 @@ struct alienfx_platdata {
 
 static u8 interface;
 
+struct awcc_quirks {
+	bool gmode;
+};
+
+static struct awcc_quirks g_series_quirks = {
+	.gmode = true,
+};
+
+static struct awcc_quirks generic_quirks = {
+	.gmode = false,
+};
+
+static const struct dmi_system_id awcc_dmi_table[] __initconst = {
+	{
+		.ident = "Alienware m17 R5",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware m18 R2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware x15 R1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware x17 R2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5511",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5515",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G3 3500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G3 3590",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G5 5500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+};
+
+struct awcc_quirks *awcc;
+
 static int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
 				 void *in_args, size_t in_size, u32 *out_data)
 {
@@ -612,7 +585,7 @@ static DEVICE_ATTR_RW(lighting_control_state);
 static umode_t zone_attr_visible(struct kobject *kobj,
 				 struct attribute *attr, int n)
 {
-	if (n < quirks->num_zones + 1)
+	if (n < alienfx->num_zones + 1)
 		return attr->mode;
 
 	return 0;
@@ -620,7 +593,7 @@ static umode_t zone_attr_visible(struct kobject *kobj,
 
 static bool zone_group_visible(struct kobject *kobj)
 {
-	return quirks->num_zones > 0;
+	return alienfx->num_zones > 0;
 }
 DEFINE_SYSFS_GROUP_VISIBLE(zone);
 
@@ -746,7 +719,7 @@ static DEVICE_ATTR_RW(source);
 
 static bool hdmi_group_visible(struct kobject *kobj)
 {
-	return quirks->hdmi_mux;
+	return alienfx->hdmi_mux;
 }
 DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
 
@@ -795,7 +768,7 @@ static DEVICE_ATTR_RO(status);
 
 static bool amplifier_group_visible(struct kobject *kobj)
 {
-	return quirks->amplifier;
+	return alienfx->amplifier;
 }
 DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
 
@@ -868,7 +841,7 @@ static DEVICE_ATTR_RW(deepsleep);
 
 static bool deepsleep_group_visible(struct kobject *kobj)
 {
-	return quirks->deepslp;
+	return alienfx->deepslp;
 }
 DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
 
@@ -1009,7 +982,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 {
 	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
 		u32 gmode_status;
 		int ret;
 
@@ -1075,7 +1048,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
 	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
 		return -ENODEV;
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
 		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
 			WMAX_THERMAL_MODE_GMODE;
 
@@ -1306,7 +1279,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 	struct platform_device *pdev;
 	int ret;
 
-	if (quirks->thermal) {
+	if (awcc) {
 		return alienware_awcc_setup(wdev);
 	} else {
 		ret = alienware_alienfx_setup(&pdata);
@@ -1327,7 +1300,7 @@ static void wmax_wmi_remove(struct wmi_device *wdev)
 {
 	struct platform_device *pdev;
 
-	if (!quirks->thermal) {
+	if (!awcc) {
 		pdev = dev_get_drvdata(&wdev->dev);
 
 		device_remove_groups(&pdev->dev, wmax_alienfx_groups);
@@ -1353,6 +1326,22 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 
 static int __init alienware_wmax_wmi_init(void)
 {
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(awcc_dmi_table);
+	if (id)
+		awcc = id->driver_data;
+
+	if (force_platform_profile)
+		awcc = &generic_quirks;
+
+	if (force_gmode) {
+		if (awcc)
+			awcc->gmode = true;
+		else
+			pr_warn("force_gmode requires platform profile support\n");
+	}
+
 	return wmi_driver_register(&alienware_wmax_wmi_driver);
 }
 
@@ -1366,18 +1355,8 @@ static int __init alienware_wmi_init(void)
 	int ret;
 
 	dmi_check_system(alienware_quirks);
-	if (quirks == NULL)
-		quirks = &quirk_unknown;
-
-	if (force_platform_profile)
-		quirks->thermal = true;
-
-	if (force_gmode) {
-		if (quirks->thermal)
-			quirks->gmode = true;
-		else
-			pr_warn("force_gmode requires platform profile support\n");
-	}
+	if (!alienfx)
+		alienfx = &quirk_unknown;
 
 	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
 		interface = WMAX;
-- 
2.47.1

[PATCH v3 14/20] MAINTAINERS: Update ALIENWARE WMI DRIVER entry

[Kurt Borja]

Dell has been inactive in its maintainership role of this driver since
around 2021. Due to this, add myself as a maintainer and update path
to support upcoming changes.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 MAINTAINERS | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3809931b9240..596c6a46478c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -784,10 +784,12 @@ F:	Documentation/admin-guide/perf/alibaba_pmu.rst
 F:	drivers/perf/alibaba_uncore_drw_pmu.c
 
 ALIENWARE WMI DRIVER
+M:	Kurt Borja <kuurtb@gmail.com>
+L:	platform-driver-x86@vger.kernel.org
 L:	Dell.Client.Kernel@dell.com
 S:	Maintained
 F:	Documentation/wmi/devices/alienware-wmi.rst
-F:	drivers/platform/x86/dell/alienware-wmi.c
+F:	drivers/platform/x86/dell/alienware-wmi*
 
 ALLEGRO DVT VIDEO IP CORE DRIVER
 M:	Michael Tretter <m.tretter@pengutronix.de>
-- 
2.47.1

[PATCH v3 15/20] platform/x86: Rename alienware-wmi.c

[Kurt Borja]

Rename alienware-wmi to support upcoming split.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/Makefile                               | 1 +
 .../platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c}  | 0
 2 files changed, 1 insertion(+)
 rename drivers/platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c} (100%)

diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
index bb3cbd470a46..f8aec8502c2f 100644
--- a/drivers/platform/x86/dell/Makefile
+++ b/drivers/platform/x86/dell/Makefile
@@ -5,6 +5,7 @@
 #
 
 obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
+alienware-wmi-objs			:= alienware-wmi-base.o
 obj-$(CONFIG_DCDBAS)			+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi-base.c
similarity index 100%
rename from drivers/platform/x86/dell/alienware-wmi.c
rename to drivers/platform/x86/dell/alienware-wmi-base.c
-- 
2.47.1

[PATCH v3 16/20] platform/x86: Add alienware-wmi.h

[Kurt Borja]

Add a header file for alienware-wmi with shared resources to support the
upcoming file split.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 .../platform/x86/dell/alienware-wmi-base.c    | 71 +++-------------
 drivers/platform/x86/dell/alienware-wmi.h     | 82 +++++++++++++++++++
 2 files changed, 92 insertions(+), 61 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

diff --git a/drivers/platform/x86/dell/alienware-wmi-base.c b/drivers/platform/x86/dell/alienware-wmi-base.c
index e2fcb95b506c..9fa5ac48436e 100644
--- a/drivers/platform/x86/dell/alienware-wmi-base.c
+++ b/drivers/platform/x86/dell/alienware-wmi-base.c
@@ -5,8 +5,6 @@
  * Copyright (C) 2014 Dell Inc <Dell.Client.Kernel@dell.com>
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/acpi.h>
 #include <linux/bitfield.h>
 #include <linux/bits.h>
@@ -16,10 +14,7 @@
 #include <linux/dmi.h>
 #include <linux/leds.h>
 #include <linux/wmi.h>
-
-#define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
-#define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
-#define WMAX_CONTROL_GUID		"A70591CE-A997-11DA-B012-B622A1EF5492"
+#include "alienware-wmi.h"
 
 #define WMAX_METHOD_HDMI_SOURCE		0x1
 #define WMAX_METHOD_HDMI_STATUS		0x2
@@ -54,18 +49,6 @@ enum INTERFACE_FLAGS {
 	WMAX,
 };
 
-enum LEGACY_CONTROL_STATES {
-	LEGACY_RUNNING = 1,
-	LEGACY_BOOTING = 0,
-	LEGACY_SUSPEND = 3,
-};
-
-enum WMAX_CONTROL_STATES {
-	WMAX_RUNNING = 0xFF,
-	WMAX_BOOTING = 0,
-	WMAX_SUSPEND = 3,
-};
-
 enum WMAX_THERMAL_INFORMATION_OPERATIONS {
 	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
 	WMAX_OPERATION_LIST_IDS			= 0x03,
@@ -113,15 +96,7 @@ static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_
 	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
 };
 
-struct alienfx_quirks {
-	u8 num_zones;
-	bool hdmi_mux;
-	bool amplifier;
-	bool deepslp;
-};
-
-static struct alienfx_quirks *alienfx;
-
+struct alienfx_quirks *alienfx;
 
 static struct alienfx_quirks quirk_inspiron5675 = {
 	.num_zones = 2,
@@ -245,12 +220,6 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
 	{}
 };
 
-struct color_platform {
-	u8 blue;
-	u8 green;
-	u8 red;
-} __packed;
-
 struct wmax_brightness_args {
 	u32 led_mask;
 	u32 percentage;
@@ -285,26 +254,6 @@ struct awcc_priv {
 	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 };
 
-struct alienfx_priv {
-	struct platform_device *pdev;
-	struct led_classdev global_led;
-	struct color_platform colors[4];
-	u8 global_brightness;
-	u8 lighting_control_state;
-};
-
-struct alienfx_ops {
-	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
-		       u8 location);
-	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
-			      u8 brightness);
-};
-
-struct alienfx_platdata {
-	struct wmi_device *wdev;
-	struct alienfx_ops ops;
-};
-
 static u8 interface;
 
 struct awcc_quirks {
@@ -404,8 +353,8 @@ static const struct dmi_system_id awcc_dmi_table[] __initconst = {
 
 struct awcc_quirks *awcc;
 
-static int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
-				 void *in_args, size_t in_size, u32 *out_data)
+int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+			  void *in_args, size_t in_size, u32 *out_data)
 {
 	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
 	struct acpi_buffer in = {in_size, in_args};
@@ -1126,7 +1075,7 @@ static struct platform_driver platform_driver = {
 	.probe = alienfx_probe,
 };
 
-static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
+int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 {
 	struct platform_device *pdev;
 	int ret;
@@ -1149,7 +1098,7 @@ static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 	return 0;
 }
 
-static void alienware_alienfx_exit(struct wmi_device *wdev)
+void alienware_alienfx_exit(struct wmi_device *wdev)
 {
 	struct platform_device *pdev = dev_get_drvdata(&wdev->dev);
 
@@ -1229,12 +1178,12 @@ static struct wmi_driver alienware_legacy_wmi_driver = {
 	.remove = legacy_wmi_remove,
 };
 
-static int __init alienware_legacy_wmi_init(void)
+int __init alienware_legacy_wmi_init(void)
 {
 	return wmi_driver_register(&alienware_legacy_wmi_driver);
 }
 
-static void __exit alienware_legacy_wmi_exit(void)
+void __exit alienware_legacy_wmi_exit(void)
 {
 	wmi_driver_unregister(&alienware_legacy_wmi_driver);
 }
@@ -1324,7 +1273,7 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 	.remove = wmax_wmi_remove,
 };
 
-static int __init alienware_wmax_wmi_init(void)
+int __init alienware_wmax_wmi_init(void)
 {
 	const struct dmi_system_id *id;
 
@@ -1345,7 +1294,7 @@ static int __init alienware_wmax_wmi_init(void)
 	return wmi_driver_register(&alienware_wmax_wmi_driver);
 }
 
-static void __exit alienware_wmax_wmi_exit(void)
+void __exit alienware_wmax_wmi_exit(void)
 {
 	wmi_driver_unregister(&alienware_wmax_wmi_driver);
 }
diff --git a/drivers/platform/x86/dell/alienware-wmi.h b/drivers/platform/x86/dell/alienware-wmi.h
new file mode 100644
index 000000000000..427203821967
--- /dev/null
+++ b/drivers/platform/x86/dell/alienware-wmi.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Alienware WMI special features driver
+ *
+ * Copyright (C) 2014 Dell Inc <Dell.Client.Kernel@dell.com>
+ * Copyright (C) 2024 Kurt Borja <kuurtb@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#ifndef _ALIENWARE_WMI_H_
+#define _ALIENWARE_WMI_H_
+
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/wmi.h>
+
+#define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
+#define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
+#define WMAX_CONTROL_GUID		"A70591CE-A997-11DA-B012-B622A1EF5492"
+
+extern struct alienfx_quirks *alienfx;
+
+enum LEGACY_CONTROL_STATES {
+	LEGACY_RUNNING = 1,
+	LEGACY_BOOTING = 0,
+	LEGACY_SUSPEND = 3,
+};
+
+enum WMAX_CONTROL_STATES {
+	WMAX_RUNNING = 0xFF,
+	WMAX_BOOTING = 0,
+	WMAX_SUSPEND = 3,
+};
+
+struct alienfx_quirks {
+	u8 num_zones;
+	bool hdmi_mux;
+	bool amplifier;
+	bool deepslp;
+};
+
+struct color_platform {
+	u8 blue;
+	u8 green;
+	u8 red;
+} __packed;
+
+struct alienfx_priv {
+	struct platform_device *pdev;
+	struct alienfx_quirks *quirks;
+	struct led_classdev global_led;
+	struct color_platform colors[4];
+	u8 global_brightness;
+	u8 lighting_control_state;
+};
+
+struct alienfx_ops {
+	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
+		       u8 location);
+	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
+			      u8 brightness);
+};
+
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+	struct alienfx_ops ops;
+};
+
+int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+			  void *in_args, size_t in_size, u32 *out_data);
+
+int alienware_alienfx_setup(struct alienfx_platdata *pdata);
+void alienware_alienfx_exit(struct wmi_device *wdev);
+
+int __init alienware_legacy_wmi_init(void);
+void __exit alienware_legacy_wmi_exit(void);
+
+int __init alienware_wmax_wmi_init(void);
+void __exit alienware_wmax_wmi_exit(void);
+
+#endif
-- 
2.47.1

[PATCH v3 17/20] platform/x86: Split the alienware-wmi driver

[Kurt Borja]

Split alienware-wmi WMI drivers into different files. This is done
seamlessly by copying and pasting, however some blocks are reordered.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/Makefile            |   2 +
 .../platform/x86/dell/alienware-wmi-base.c    | 847 +-----------------
 .../platform/x86/dell/alienware-wmi-legacy.c  |  98 ++
 .../platform/x86/dell/alienware-wmi-wmax.c    | 767 ++++++++++++++++
 drivers/platform/x86/dell/alienware-wmi.h     |   1 -
 5 files changed, 868 insertions(+), 847 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c

diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
index f8aec8502c2f..03ba459f3d31 100644
--- a/drivers/platform/x86/dell/Makefile
+++ b/drivers/platform/x86/dell/Makefile
@@ -6,6 +6,8 @@
 
 obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
 alienware-wmi-objs			:= alienware-wmi-base.o
+alienware-wmi-y				+= alienware-wmi-legacy.o
+alienware-wmi-y				+= alienware-wmi-wmax.o
 obj-$(CONFIG_DCDBAS)			+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
diff --git a/drivers/platform/x86/dell/alienware-wmi-base.c b/drivers/platform/x86/dell/alienware-wmi-base.c
index 9fa5ac48436e..78101952094c 100644
--- a/drivers/platform/x86/dell/alienware-wmi-base.c
+++ b/drivers/platform/x86/dell/alienware-wmi-base.c
@@ -6,96 +6,21 @@
  */
 
 #include <linux/acpi.h>
-#include <linux/bitfield.h>
-#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/platform_profile.h>
 #include <linux/dmi.h>
 #include <linux/leds.h>
-#include <linux/wmi.h>
 #include "alienware-wmi.h"
 
-#define WMAX_METHOD_HDMI_SOURCE		0x1
-#define WMAX_METHOD_HDMI_STATUS		0x2
-#define WMAX_METHOD_BRIGHTNESS		0x3
-#define WMAX_METHOD_ZONE_CONTROL	0x4
-#define WMAX_METHOD_HDMI_CABLE		0x5
-#define WMAX_METHOD_AMPLIFIER_CABLE	0x6
-#define WMAX_METHOD_DEEP_SLEEP_CONTROL	0x0B
-#define WMAX_METHOD_DEEP_SLEEP_STATUS	0x0C
-#define WMAX_METHOD_THERMAL_INFORMATION	0x14
-#define WMAX_METHOD_THERMAL_CONTROL	0x15
-#define WMAX_METHOD_GAME_SHIFT_STATUS	0x25
-
-#define WMAX_THERMAL_MODE_GMODE		0xAB
-
-#define WMAX_FAILURE_CODE		0xFFFFFFFF
-
 MODULE_AUTHOR("Mario Limonciello <mario.limonciello@outlook.com>");
 MODULE_DESCRIPTION("Alienware special feature control");
 MODULE_LICENSE("GPL");
 
-static bool force_platform_profile;
-module_param_unsafe(force_platform_profile, bool, 0);
-MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
-
-static bool force_gmode;
-module_param_unsafe(force_gmode, bool, 0);
-MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected");
-
 enum INTERFACE_FLAGS {
 	LEGACY,
 	WMAX,
 };
 
-enum WMAX_THERMAL_INFORMATION_OPERATIONS {
-	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
-	WMAX_OPERATION_LIST_IDS			= 0x03,
-	WMAX_OPERATION_CURRENT_PROFILE		= 0x0B,
-};
-
-enum WMAX_THERMAL_CONTROL_OPERATIONS {
-	WMAX_OPERATION_ACTIVATE_PROFILE		= 0x01,
-};
-
-enum WMAX_GAME_SHIFT_STATUS_OPERATIONS {
-	WMAX_OPERATION_TOGGLE_GAME_SHIFT	= 0x01,
-	WMAX_OPERATION_GET_GAME_SHIFT_STATUS	= 0x02,
-};
-
-enum WMAX_THERMAL_TABLES {
-	WMAX_THERMAL_TABLE_BASIC		= 0x90,
-	WMAX_THERMAL_TABLE_USTT			= 0xA0,
-};
-
-enum wmax_thermal_mode {
-	THERMAL_MODE_USTT_BALANCED,
-	THERMAL_MODE_USTT_BALANCED_PERFORMANCE,
-	THERMAL_MODE_USTT_COOL,
-	THERMAL_MODE_USTT_QUIET,
-	THERMAL_MODE_USTT_PERFORMANCE,
-	THERMAL_MODE_USTT_LOW_POWER,
-	THERMAL_MODE_BASIC_QUIET,
-	THERMAL_MODE_BASIC_BALANCED,
-	THERMAL_MODE_BASIC_BALANCED_PERFORMANCE,
-	THERMAL_MODE_BASIC_PERFORMANCE,
-	THERMAL_MODE_LAST,
-};
-
-static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_MODE_LAST] = {
-	[THERMAL_MODE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
-	[THERMAL_MODE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
-	[THERMAL_MODE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
-	[THERMAL_MODE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
-	[THERMAL_MODE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
-	[THERMAL_MODE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
-	[THERMAL_MODE_BASIC_QUIET]			= PLATFORM_PROFILE_QUIET,
-	[THERMAL_MODE_BASIC_BALANCED]			= PLATFORM_PROFILE_BALANCED,
-	[THERMAL_MODE_BASIC_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
-	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
-};
-
 struct alienfx_quirks *alienfx;
 
 static struct alienfx_quirks quirk_inspiron5675 = {
@@ -220,138 +145,7 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
 	{}
 };
 
-struct wmax_brightness_args {
-	u32 led_mask;
-	u32 percentage;
-};
-
-struct wmax_basic_args {
-	u8 arg;
-};
-
-struct legacy_led_args {
-	struct color_platform colors;
-	u8 brightness;
-	u8 state;
-} __packed;
-
-struct wmax_led_args {
-	u32 led_mask;
-	struct color_platform colors;
-	u8 state;
-} __packed;
-
-struct wmax_u32_args {
-	u8 operation;
-	u8 arg1;
-	u8 arg2;
-	u8 arg3;
-};
-
-struct awcc_priv {
-	struct wmi_device *wdev;
-	struct platform_profile_handler pp_handler;
-	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-};
-
-static u8 interface;
-
-struct awcc_quirks {
-	bool gmode;
-};
-
-static struct awcc_quirks g_series_quirks = {
-	.gmode = true,
-};
-
-static struct awcc_quirks generic_quirks = {
-	.gmode = false,
-};
-
-static const struct dmi_system_id awcc_dmi_table[] __initconst = {
-	{
-		.ident = "Alienware m17 R5",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
-		},
-		.driver_data = &generic_quirks,
-	},
-	{
-		.ident = "Alienware m18 R2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
-		},
-		.driver_data = &generic_quirks,
-	},
-	{
-		.ident = "Alienware x15 R1",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
-		},
-		.driver_data = &generic_quirks,
-	},
-	{
-		.ident = "Alienware x17 R2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
-		},
-		.driver_data = &generic_quirks,
-	},
-	{
-		.ident = "Dell Inc. G15 5510",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
-		},
-		.driver_data = &g_series_quirks,
-	},
-	{
-		.ident = "Dell Inc. G15 5511",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
-		},
-		.driver_data = &g_series_quirks,
-	},
-	{
-		.ident = "Dell Inc. G15 5515",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
-		},
-		.driver_data = &g_series_quirks,
-	},
-	{
-		.ident = "Dell Inc. G3 3500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
-		},
-		.driver_data = &g_series_quirks,
-	},
-	{
-		.ident = "Dell Inc. G3 3590",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
-		},
-		.driver_data = &g_series_quirks,
-	},
-	{
-		.ident = "Dell Inc. G5 5500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
-		},
-		.driver_data = &g_series_quirks,
-	},
-};
-
-struct awcc_quirks *awcc;
+u8 interface;
 
 int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
 			  void *in_args, size_t in_size, u32 *out_data)
@@ -587,445 +381,6 @@ static enum led_brightness global_led_get(struct led_classdev *led_cdev)
 	return priv->global_brightness;
 }
 
-/*
- *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
- *	It can toggle between standard system GPU output and HDMI input.
- */
-static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	struct alienfx_platdata *pdata = dev_get_platdata(dev);
-	struct wmax_basic_args in_args = {
-		.arg = 0,
-	};
-	u32 out_data;
-	int ret;
-
-	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
-				    &in_args, sizeof(in_args), &out_data);
-
-	if (!ret) {
-		if (out_data == 0)
-			return sysfs_emit(buf, "[unconnected] connected unknown\n");
-		else if (out_data == 1)
-			return sysfs_emit(buf, "unconnected [connected] unknown\n");
-	}
-
-	pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret);
-	return sysfs_emit(buf, "unconnected connected [unknown]\n");
-}
-
-static ssize_t source_show(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	struct alienfx_platdata *pdata = dev_get_platdata(dev);
-	struct wmax_basic_args in_args = {
-		.arg = 0,
-	};
-	u32 out_data;
-	int ret;
-
-	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
-				    &in_args, sizeof(in_args), &out_data);
-
-	if (!ret) {
-		if (out_data == 1)
-			return sysfs_emit(buf, "[input] gpu unknown\n");
-		else if (out_data == 2)
-			return sysfs_emit(buf, "input [gpu] unknown\n");
-	}
-
-	pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret);
-	return sysfs_emit(buf, "input gpu [unknown]\n");
-}
-
-static ssize_t source_store(struct device *dev, struct device_attribute *attr,
-			    const char *buf, size_t count)
-{
-	struct alienfx_platdata *pdata = dev_get_platdata(dev);
-	struct wmax_basic_args args;
-	int ret;
-
-	if (strcmp(buf, "gpu\n") == 0)
-		args.arg = 1;
-	else if (strcmp(buf, "input\n") == 0)
-		args.arg = 2;
-	else
-		args.arg = 3;
-	pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
-
-	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE, &args,
-				    sizeof(args), NULL);
-
-	if (ret < 0)
-		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret);
-
-	return count;
-}
-
-static DEVICE_ATTR_RO(cable);
-static DEVICE_ATTR_RW(source);
-
-static bool hdmi_group_visible(struct kobject *kobj)
-{
-	return alienfx->hdmi_mux;
-}
-DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
-
-static struct attribute *hdmi_attrs[] = {
-	&dev_attr_cable.attr,
-	&dev_attr_source.attr,
-	NULL,
-};
-
-static const struct attribute_group hdmi_attribute_group = {
-	.name = "hdmi",
-	.is_visible = SYSFS_GROUP_VISIBLE(hdmi),
-	.attrs = hdmi_attrs,
-};
-
-/*
- * Alienware GFX amplifier support
- * - Currently supports reading cable status
- * - Leaving expansion room to possibly support dock/undock events later
- */
-static ssize_t status_show(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	struct alienfx_platdata *pdata = dev_get_platdata(dev);
-	struct wmax_basic_args in_args = {
-		.arg = 0,
-	};
-	u32 out_data;
-	int ret;
-
-	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
-				    &in_args, sizeof(in_args), &out_data);
-
-	if (!ret) {
-		if (out_data == 0)
-			return sysfs_emit(buf, "[unconnected] connected unknown\n");
-		else if (out_data == 1)
-			return sysfs_emit(buf, "unconnected [connected] unknown\n");
-	}
-
-	pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret);
-	return sysfs_emit(buf, "unconnected connected [unknown]\n");
-}
-
-static DEVICE_ATTR_RO(status);
-
-static bool amplifier_group_visible(struct kobject *kobj)
-{
-	return alienfx->amplifier;
-}
-DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
-
-static struct attribute *amplifier_attrs[] = {
-	&dev_attr_status.attr,
-	NULL,
-};
-
-static const struct attribute_group amplifier_attribute_group = {
-	.name = "amplifier",
-	.is_visible = SYSFS_GROUP_VISIBLE(amplifier),
-	.attrs = amplifier_attrs,
-};
-
-/*
- * Deep Sleep Control support
- * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
- */
-static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
-			      char *buf)
-{
-	struct alienfx_platdata *pdata = dev_get_platdata(dev);
-	struct wmax_basic_args in_args = {
-		.arg = 0,
-	};
-	u32 out_data;
-	int ret;
-
-	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
-				    &in_args, sizeof(in_args), &out_data);
-
-	if (!ret) {
-		if (out_data == 0)
-			return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
-		else if (out_data == 1)
-			return sysfs_emit(buf, "disabled [s5] s5_s4\n");
-		else if (out_data == 2)
-			return sysfs_emit(buf, "disabled s5 [s5_s4]\n");
-	}
-
-	pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret);
-	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
-}
-
-static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
-			       const char *buf, size_t count)
-{
-	struct alienfx_platdata *pdata = dev_get_platdata(dev);
-	struct wmax_basic_args args;
-	int ret;
-
-	if (strcmp(buf, "disabled\n") == 0)
-		args.arg = 0;
-	else if (strcmp(buf, "s5\n") == 0)
-		args.arg = 1;
-	else
-		args.arg = 2;
-	pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
-
-	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
-				    &args, sizeof(args), NULL);
-
-	if (!ret)
-		pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret);
-
-	return count;
-}
-
-static DEVICE_ATTR_RW(deepsleep);
-
-static bool deepsleep_group_visible(struct kobject *kobj)
-{
-	return alienfx->deepslp;
-}
-DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
-
-static struct attribute *deepsleep_attrs[] = {
-	&dev_attr_deepsleep.attr,
-	NULL,
-};
-
-static const struct attribute_group deepsleep_attribute_group = {
-	.name = "deepsleep",
-	.is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
-	.attrs = deepsleep_attrs,
-};
-
-/*
- * Thermal Profile control
- *  - Provides thermal profile control through the Platform Profile API
- */
-#define WMAX_THERMAL_TABLE_MASK		GENMASK(7, 4)
-#define WMAX_THERMAL_MODE_MASK		GENMASK(3, 0)
-#define WMAX_SENSOR_ID_MASK		BIT(8)
-
-static bool is_wmax_thermal_code(u32 code)
-{
-	if (code & WMAX_SENSOR_ID_MASK)
-		return false;
-
-	if ((code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_LAST)
-		return false;
-
-	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_BASIC &&
-	    (code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_BASIC_QUIET)
-		return true;
-
-	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_USTT &&
-	    (code & WMAX_THERMAL_MODE_MASK) <= THERMAL_MODE_USTT_LOW_POWER)
-		return true;
-
-	return false;
-}
-
-static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
-				    u8 arg, u32 *out_data)
-{
-	struct wmax_u32_args in_args = {
-		.operation = operation,
-		.arg1 = arg,
-		.arg2 = 0,
-		.arg3 = 0,
-	};
-	int ret;
-
-	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
-				    &in_args, sizeof(in_args), out_data);
-	if (ret < 0)
-		return ret;
-
-	if (*out_data == WMAX_FAILURE_CODE)
-		return -EBADRQC;
-
-	return 0;
-}
-
-static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
-{
-	struct wmax_u32_args in_args = {
-		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
-		.arg1 = profile,
-		.arg2 = 0,
-		.arg3 = 0,
-	};
-	u32 out_data;
-	int ret;
-
-	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
-				    &in_args, sizeof(in_args), &out_data);
-	if (ret)
-		return ret;
-
-	if (out_data == WMAX_FAILURE_CODE)
-		return -EBADRQC;
-
-	return 0;
-}
-
-static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
-				  u32 *out_data)
-{
-	struct wmax_u32_args in_args = {
-		.operation = operation,
-		.arg1 = 0,
-		.arg2 = 0,
-		.arg3 = 0,
-	};
-	int ret;
-
-	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
-				    &in_args, sizeof(in_args), out_data);
-
-	if (ret < 0)
-		return ret;
-
-	if (*out_data == WMAX_FAILURE_CODE)
-		return -EOPNOTSUPP;
-
-	return 0;
-}
-
-static int thermal_profile_get(struct platform_profile_handler *pprof,
-			       enum platform_profile_option *profile)
-{
-	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
-	u32 out_data;
-	int ret;
-
-	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
-				       0, &out_data);
-
-	if (ret < 0)
-		return ret;
-
-	if (out_data == WMAX_THERMAL_MODE_GMODE) {
-		*profile = PLATFORM_PROFILE_PERFORMANCE;
-		return 0;
-	}
-
-	if (!is_wmax_thermal_code(out_data))
-		return -ENODATA;
-
-	out_data &= WMAX_THERMAL_MODE_MASK;
-	*profile = wmax_mode_to_platform_profile[out_data];
-
-	return 0;
-}
-
-static int thermal_profile_set(struct platform_profile_handler *pprof,
-			       enum platform_profile_option profile)
-{
-	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
-
-	if (awcc->gmode) {
-		u32 gmode_status;
-		int ret;
-
-		ret = wmax_game_shift_status(priv->wdev,
-					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
-					     &gmode_status);
-
-		if (ret < 0)
-			return ret;
-
-		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
-		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
-			ret = wmax_game_shift_status(priv->wdev,
-						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
-						     &gmode_status);
-
-			if (ret < 0)
-				return ret;
-		}
-	}
-
-	return wmax_thermal_control(priv->wdev,
-				    priv->supported_thermal_profiles[profile]);
-}
-
-static int create_thermal_profile(struct wmi_device *wdev)
-{
-	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
-	enum platform_profile_option profile;
-	enum wmax_thermal_mode mode;
-	u8 sys_desc[4];
-	u32 first_mode;
-	u32 out_data;
-	int ret;
-
-	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
-				       0, (u32 *) &sys_desc);
-	if (ret < 0)
-		return ret;
-
-	first_mode = sys_desc[0] + sys_desc[1];
-
-	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
-					       i + first_mode, &out_data);
-
-		if (ret == -EIO)
-			return ret;
-
-		if (ret == -EBADRQC)
-			break;
-
-		if (!is_wmax_thermal_code(out_data))
-			continue;
-
-		mode = out_data & WMAX_THERMAL_MODE_MASK;
-		profile = wmax_mode_to_platform_profile[mode];
-		priv->supported_thermal_profiles[profile] = out_data;
-
-		set_bit(profile, priv->pp_handler.choices);
-	}
-
-	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
-		return -ENODEV;
-
-	if (awcc->gmode) {
-		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
-			WMAX_THERMAL_MODE_GMODE;
-
-		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
-	}
-
-	priv->pp_handler.profile_get = thermal_profile_get;
-	priv->pp_handler.profile_set = thermal_profile_set;
-	priv->pp_handler.name = "alienware-wmi";
-	priv->pp_handler.dev = &wdev->dev;
-
-	return devm_platform_profile_register(&priv->pp_handler);
-}
-
-static int alienware_awcc_setup(struct wmi_device *wdev)
-{
-	struct awcc_priv *priv;
-
-	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	dev_set_drvdata(&wdev->dev, priv);
-	priv->wdev = wdev;
-
-	return create_thermal_profile(wdev);
-}
-
 /*
  * Platform Driver
  */
@@ -1060,13 +415,6 @@ static const struct attribute_group *alienfx_groups[] = {
 	NULL
 };
 
-static const struct attribute_group *wmax_alienfx_groups[] = {
-	&hdmi_attribute_group,
-	&amplifier_attribute_group,
-	&deepsleep_attribute_group,
-	NULL
-};
-
 static struct platform_driver platform_driver = {
 	.driver = {
 		.name = "alienware-wmi",
@@ -1106,199 +454,6 @@ void alienware_alienfx_exit(struct wmi_device *wdev)
 	platform_driver_unregister(&platform_driver);
 }
 
-/*
- * Legacy WMI driver
- */
-static int legacy_wmi_update_led(struct alienfx_priv *priv,
-				 struct wmi_device *wdev, u8 location)
-{
-	struct legacy_led_args legacy_args = {
-		.colors = priv->colors[location],
-		.brightness = priv->global_brightness,
-		.state = 0,
-	};
-	struct acpi_buffer input;
-	acpi_status status;
-
-	if (legacy_args.state != LEGACY_RUNNING) {
-		legacy_args.state = priv->lighting_control_state;
-
-		input.length = sizeof(legacy_args);
-		input.pointer = &legacy_args;
-
-		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
-					     location + 1, &input, NULL);
-		if (ACPI_FAILURE(status))
-			return -EIO;
-
-		return 0;
-	}
-
-	return alienware_wmi_command(wdev, location + 1, &legacy_args,
-				     sizeof(legacy_args), NULL);
-}
-
-static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
-					struct wmi_device *wdev, u8 brightness)
-{
-	return legacy_wmi_update_led(priv, wdev, 0);
-}
-
-static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
-{
-	struct alienfx_platdata pdata = {
-		.wdev = wdev,
-		.ops = {
-			.upd_led = legacy_wmi_update_led,
-			.upd_brightness = legacy_wmi_update_brightness,
-		},
-	};
-
-	return alienware_alienfx_setup(&pdata);
-}
-
-static void legacy_wmi_remove(struct wmi_device *wdev)
-{
-	alienware_alienfx_exit(wdev);
-}
-
-static struct wmi_device_id alienware_legacy_device_id_table[] = {
-	{ LEGACY_CONTROL_GUID, NULL },
-	{ },
-};
-MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
-
-static struct wmi_driver alienware_legacy_wmi_driver = {
-	.driver = {
-		.name = "alienware-wmi-alienfx",
-		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-	},
-	.id_table = alienware_legacy_device_id_table,
-	.probe = legacy_wmi_probe,
-	.remove = legacy_wmi_remove,
-};
-
-int __init alienware_legacy_wmi_init(void)
-{
-	return wmi_driver_register(&alienware_legacy_wmi_driver);
-}
-
-void __exit alienware_legacy_wmi_exit(void)
-{
-	wmi_driver_unregister(&alienware_legacy_wmi_driver);
-}
-
-/*
- * WMAX WMI driver
- */
-static int wmax_wmi_update_led(struct alienfx_priv *priv,
-			       struct wmi_device *wdev, u8 location)
-{
-	struct wmax_led_args in_args = {
-		.led_mask = 1 << location,
-		.colors = priv->colors[location],
-		.state = priv->lighting_control_state,
-	};
-
-	return alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL, &in_args,
-				     sizeof(in_args), NULL);
-}
-
-static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
-				      struct wmi_device *wdev, u8 brightness)
-{
-	struct wmax_brightness_args in_args = {
-		.led_mask = 0xFF,
-		.percentage = brightness,
-	};
-
-	return alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
-				     sizeof(in_args), NULL);
-}
-
-static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
-{
-	struct alienfx_platdata pdata = {
-		.wdev = wdev,
-		.ops = {
-			.upd_led = wmax_wmi_update_led,
-			.upd_brightness = wmax_wmi_update_brightness,
-		},
-	};
-	struct platform_device *pdev;
-	int ret;
-
-	if (awcc) {
-		return alienware_awcc_setup(wdev);
-	} else {
-		ret = alienware_alienfx_setup(&pdata);
-		if (ret < 0)
-			return ret;
-
-		pdev = dev_get_drvdata(&wdev->dev);
-
-		ret = device_add_groups(&pdev->dev, wmax_alienfx_groups);
-		if (ret < 0)
-			alienware_alienfx_exit(wdev);
-
-		return ret;
-	}
-}
-
-static void wmax_wmi_remove(struct wmi_device *wdev)
-{
-	struct platform_device *pdev;
-
-	if (!awcc) {
-		pdev = dev_get_drvdata(&wdev->dev);
-
-		device_remove_groups(&pdev->dev, wmax_alienfx_groups);
-		alienware_alienfx_exit(wdev);
-	}
-}
-
-static struct wmi_device_id alienware_wmax_device_id_table[] = {
-	{ WMAX_CONTROL_GUID, NULL },
-	{ },
-};
-MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
-
-static struct wmi_driver alienware_wmax_wmi_driver = {
-	.driver = {
-		.name = "alienware-wmi-wmax",
-		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-	},
-	.id_table = alienware_wmax_device_id_table,
-	.probe = wmax_wmi_probe,
-	.remove = wmax_wmi_remove,
-};
-
-int __init alienware_wmax_wmi_init(void)
-{
-	const struct dmi_system_id *id;
-
-	id = dmi_first_match(awcc_dmi_table);
-	if (id)
-		awcc = id->driver_data;
-
-	if (force_platform_profile)
-		awcc = &generic_quirks;
-
-	if (force_gmode) {
-		if (awcc)
-			awcc->gmode = true;
-		else
-			pr_warn("force_gmode requires platform profile support\n");
-	}
-
-	return wmi_driver_register(&alienware_wmax_wmi_driver);
-}
-
-void __exit alienware_wmax_wmi_exit(void)
-{
-	wmi_driver_unregister(&alienware_wmax_wmi_driver);
-}
-
 static int __init alienware_wmi_init(void)
 {
 	int ret;
diff --git a/drivers/platform/x86/dell/alienware-wmi-legacy.c b/drivers/platform/x86/dell/alienware-wmi-legacy.c
new file mode 100644
index 000000000000..45ff6b6518e5
--- /dev/null
+++ b/drivers/platform/x86/dell/alienware-wmi-legacy.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Alienware LEGACY WMI device driver
+ *
+ * Copyright (C) 2025 Kurt Borja <kuurtb@gmail.com>
+ */
+
+#include <linux/wmi.h>
+#include "alienware-wmi.h"
+
+struct legacy_led_args {
+	struct color_platform colors;
+	u8 brightness;
+	u8 state;
+} __packed;
+
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_update_led(struct alienfx_priv *priv,
+				 struct wmi_device *wdev, u8 location)
+{
+	struct legacy_led_args legacy_args = {
+		.colors = priv->colors[location],
+		.brightness = priv->global_brightness,
+		.state = 0,
+	};
+	struct acpi_buffer input;
+	acpi_status status;
+
+	if (legacy_args.state != LEGACY_RUNNING) {
+		legacy_args.state = priv->lighting_control_state;
+
+		input.length = sizeof(legacy_args);
+		input.pointer = &legacy_args;
+
+		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
+					     location + 1, &input, NULL);
+		if (ACPI_FAILURE(status))
+			return -EIO;
+
+		return 0;
+	}
+
+	return alienware_wmi_command(wdev, location + 1, &legacy_args,
+				     sizeof(legacy_args), NULL);
+}
+
+static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
+					struct wmi_device *wdev, u8 brightness)
+{
+	return legacy_wmi_update_led(priv, wdev, 0);
+}
+
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+		.ops = {
+			.upd_led = legacy_wmi_update_led,
+			.upd_brightness = legacy_wmi_update_brightness,
+		},
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static void legacy_wmi_remove(struct wmi_device *wdev)
+{
+	alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.remove = legacy_wmi_remove,
+};
+
+int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
new file mode 100644
index 000000000000..9b65e401b454
--- /dev/null
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Alienware WMAX WMI device driver
+ *
+ * Copyright (C) 2014 Dell Inc <Dell.Client.Kernel@dell.com>
+ * Copyright (C) 2025 Kurt Borja <kuurtb@gmail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/dmi.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_profile.h>
+#include <linux/wmi.h>
+#include "alienware-wmi.h"
+
+#define WMAX_METHOD_HDMI_SOURCE			0x1
+#define WMAX_METHOD_HDMI_STATUS			0x2
+#define WMAX_METHOD_HDMI_CABLE			0x5
+#define WMAX_METHOD_AMPLIFIER_CABLE		0x6
+#define WMAX_METHOD_DEEP_SLEEP_CONTROL		0x0B
+#define WMAX_METHOD_DEEP_SLEEP_STATUS		0x0C
+#define WMAX_METHOD_BRIGHTNESS			0x3
+#define WMAX_METHOD_ZONE_CONTROL		0x4
+#define WMAX_METHOD_THERMAL_INFORMATION		0x14
+#define WMAX_METHOD_THERMAL_CONTROL		0x15
+#define WMAX_METHOD_GAME_SHIFT_STATUS		0x25
+
+#define WMAX_THERMAL_MODE_GMODE			0xAB
+
+#define WMAX_FAILURE_CODE			0xFFFFFFFF
+#define WMAX_THERMAL_TABLE_MASK			GENMASK(7, 4)
+#define WMAX_THERMAL_MODE_MASK			GENMASK(3, 0)
+#define WMAX_SENSOR_ID_MASK			BIT(8)
+
+static bool force_platform_profile;
+module_param_unsafe(force_platform_profile, bool, 0);
+MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
+
+static bool force_gmode;
+module_param_unsafe(force_gmode, bool, 0);
+MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected");
+
+struct awcc_quirks {
+	bool gmode;
+};
+
+static struct awcc_quirks g_series_quirks = {
+	.gmode = true,
+};
+
+static struct awcc_quirks generic_quirks = {
+	.gmode = false,
+};
+
+static const struct dmi_system_id awcc_dmi_table[] __initconst = {
+	{
+		.ident = "Alienware m17 R5",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware m18 R2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware x15 R1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware x17 R2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5511",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5515",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G3 3500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G3 3590",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G5 5500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+};
+
+enum WMAX_THERMAL_INFORMATION_OPERATIONS {
+	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
+	WMAX_OPERATION_LIST_IDS			= 0x03,
+	WMAX_OPERATION_CURRENT_PROFILE		= 0x0B,
+};
+
+enum WMAX_THERMAL_CONTROL_OPERATIONS {
+	WMAX_OPERATION_ACTIVATE_PROFILE		= 0x01,
+};
+
+enum WMAX_GAME_SHIFT_STATUS_OPERATIONS {
+	WMAX_OPERATION_TOGGLE_GAME_SHIFT	= 0x01,
+	WMAX_OPERATION_GET_GAME_SHIFT_STATUS	= 0x02,
+};
+
+enum WMAX_THERMAL_TABLES {
+	WMAX_THERMAL_TABLE_BASIC		= 0x90,
+	WMAX_THERMAL_TABLE_USTT			= 0xA0,
+};
+
+enum wmax_thermal_mode {
+	THERMAL_MODE_USTT_BALANCED,
+	THERMAL_MODE_USTT_BALANCED_PERFORMANCE,
+	THERMAL_MODE_USTT_COOL,
+	THERMAL_MODE_USTT_QUIET,
+	THERMAL_MODE_USTT_PERFORMANCE,
+	THERMAL_MODE_USTT_LOW_POWER,
+	THERMAL_MODE_BASIC_QUIET,
+	THERMAL_MODE_BASIC_BALANCED,
+	THERMAL_MODE_BASIC_BALANCED_PERFORMANCE,
+	THERMAL_MODE_BASIC_PERFORMANCE,
+	THERMAL_MODE_LAST,
+};
+
+struct wmax_led_args {
+	u32 led_mask;
+	struct color_platform colors;
+	u8 state;
+} __packed;
+
+struct wmax_brightness_args {
+	u32 led_mask;
+	u32 percentage;
+};
+
+struct wmax_basic_args {
+	u8 arg;
+};
+
+struct wmax_u32_args {
+	u8 operation;
+	u8 arg1;
+	u8 arg2;
+	u8 arg3;
+};
+
+struct awcc_priv {
+	struct wmi_device *wdev;
+	struct platform_profile_handler pp_handler;
+	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+};
+
+static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_MODE_LAST] = {
+	[THERMAL_MODE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
+	[THERMAL_MODE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
+	[THERMAL_MODE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
+	[THERMAL_MODE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
+	[THERMAL_MODE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
+	[THERMAL_MODE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
+	[THERMAL_MODE_BASIC_QUIET]			= PLATFORM_PROFILE_QUIET,
+	[THERMAL_MODE_BASIC_BALANCED]			= PLATFORM_PROFILE_BALANCED,
+	[THERMAL_MODE_BASIC_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
+	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
+};
+
+struct awcc_quirks *awcc;
+
+/*
+ *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
+ *	It can toggle between standard system GPU output and HDMI input.
+ */
+static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
+	struct wmax_basic_args in_args = {
+		.arg = 0,
+	};
+	u32 out_data;
+	int ret;
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
+		if (out_data == 0)
+			return sysfs_emit(buf, "[unconnected] connected unknown\n");
+		else if (out_data == 1)
+			return sysfs_emit(buf, "unconnected [connected] unknown\n");
+	}
+
+	pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret);
+	return sysfs_emit(buf, "unconnected connected [unknown]\n");
+}
+
+static ssize_t source_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
+	struct wmax_basic_args in_args = {
+		.arg = 0,
+	};
+	u32 out_data;
+	int ret;
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
+		if (out_data == 1)
+			return sysfs_emit(buf, "[input] gpu unknown\n");
+		else if (out_data == 2)
+			return sysfs_emit(buf, "input [gpu] unknown\n");
+	}
+
+	pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret);
+	return sysfs_emit(buf, "input gpu [unknown]\n");
+}
+
+static ssize_t source_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
+	struct wmax_basic_args args;
+	int ret;
+
+	if (strcmp(buf, "gpu\n") == 0)
+		args.arg = 1;
+	else if (strcmp(buf, "input\n") == 0)
+		args.arg = 2;
+	else
+		args.arg = 3;
+	pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE, &args,
+				    sizeof(args), NULL);
+
+	if (ret < 0)
+		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret);
+
+	return count;
+}
+
+static DEVICE_ATTR_RO(cable);
+static DEVICE_ATTR_RW(source);
+
+static bool hdmi_group_visible(struct kobject *kobj)
+{
+	return alienfx->hdmi_mux;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
+
+static struct attribute *hdmi_attrs[] = {
+	&dev_attr_cable.attr,
+	&dev_attr_source.attr,
+	NULL,
+};
+
+static const struct attribute_group hdmi_attribute_group = {
+	.name = "hdmi",
+	.is_visible = SYSFS_GROUP_VISIBLE(hdmi),
+	.attrs = hdmi_attrs,
+};
+
+/*
+ * Alienware GFX amplifier support
+ * - Currently supports reading cable status
+ * - Leaving expansion room to possibly support dock/undock events later
+ */
+static ssize_t status_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
+	struct wmax_basic_args in_args = {
+		.arg = 0,
+	};
+	u32 out_data;
+	int ret;
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
+		if (out_data == 0)
+			return sysfs_emit(buf, "[unconnected] connected unknown\n");
+		else if (out_data == 1)
+			return sysfs_emit(buf, "unconnected [connected] unknown\n");
+	}
+
+	pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret);
+	return sysfs_emit(buf, "unconnected connected [unknown]\n");
+}
+
+static DEVICE_ATTR_RO(status);
+
+static bool amplifier_group_visible(struct kobject *kobj)
+{
+	return alienfx->amplifier;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
+
+static struct attribute *amplifier_attrs[] = {
+	&dev_attr_status.attr,
+	NULL,
+};
+
+static const struct attribute_group amplifier_attribute_group = {
+	.name = "amplifier",
+	.is_visible = SYSFS_GROUP_VISIBLE(amplifier),
+	.attrs = amplifier_attrs,
+};
+
+/*
+ * Deep Sleep Control support
+ * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
+ */
+static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
+	struct wmax_basic_args in_args = {
+		.arg = 0,
+	};
+	u32 out_data;
+	int ret;
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
+		if (out_data == 0)
+			return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
+		else if (out_data == 1)
+			return sysfs_emit(buf, "disabled [s5] s5_s4\n");
+		else if (out_data == 2)
+			return sysfs_emit(buf, "disabled s5 [s5_s4]\n");
+	}
+
+	pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret);
+	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
+}
+
+static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
+	struct wmax_basic_args args;
+	int ret;
+
+	if (strcmp(buf, "disabled\n") == 0)
+		args.arg = 0;
+	else if (strcmp(buf, "s5\n") == 0)
+		args.arg = 1;
+	else
+		args.arg = 2;
+	pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
+				    &args, sizeof(args), NULL);
+
+	if (!ret)
+		pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(deepsleep);
+
+static bool deepsleep_group_visible(struct kobject *kobj)
+{
+	return alienfx->deepslp;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
+
+static struct attribute *deepsleep_attrs[] = {
+	&dev_attr_deepsleep.attr,
+	NULL,
+};
+
+static const struct attribute_group deepsleep_attribute_group = {
+	.name = "deepsleep",
+	.is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
+	.attrs = deepsleep_attrs,
+};
+
+static const struct attribute_group *wmax_alienfx_groups[] = {
+	&hdmi_attribute_group,
+	&amplifier_attribute_group,
+	&deepsleep_attribute_group,
+	NULL
+};
+
+/*
+ * Thermal Profile control
+ *  - Provides thermal profile control through the Platform Profile API
+ */
+static bool is_wmax_thermal_code(u32 code)
+{
+	if (code & WMAX_SENSOR_ID_MASK)
+		return false;
+
+	if ((code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_LAST)
+		return false;
+
+	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_BASIC &&
+	    (code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_BASIC_QUIET)
+		return true;
+
+	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_USTT &&
+	    (code & WMAX_THERMAL_MODE_MASK) <= THERMAL_MODE_USTT_LOW_POWER)
+		return true;
+
+	return false;
+}
+
+static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
+				    u8 arg, u32 *out_data)
+{
+	struct wmax_u32_args in_args = {
+		.operation = operation,
+		.arg1 = arg,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+	int ret;
+
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
+				    &in_args, sizeof(in_args), out_data);
+	if (ret < 0)
+		return ret;
+
+	if (*out_data == WMAX_FAILURE_CODE)
+		return -EBADRQC;
+
+	return 0;
+}
+
+static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
+{
+	struct wmax_u32_args in_args = {
+		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
+		.arg1 = profile,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+	u32 out_data;
+	int ret;
+
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
+				    &in_args, sizeof(in_args), &out_data);
+	if (ret)
+		return ret;
+
+	if (out_data == WMAX_FAILURE_CODE)
+		return -EBADRQC;
+
+	return 0;
+}
+
+static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
+				  u32 *out_data)
+{
+	struct wmax_u32_args in_args = {
+		.operation = operation,
+		.arg1 = 0,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+	int ret;
+
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
+				    &in_args, sizeof(in_args), out_data);
+
+	if (ret < 0)
+		return ret;
+
+	if (*out_data == WMAX_FAILURE_CODE)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static int thermal_profile_get(struct platform_profile_handler *pprof,
+			       enum platform_profile_option *profile)
+{
+	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
+	u32 out_data;
+	int ret;
+
+	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
+				       0, &out_data);
+
+	if (ret < 0)
+		return ret;
+
+	if (out_data == WMAX_THERMAL_MODE_GMODE) {
+		*profile = PLATFORM_PROFILE_PERFORMANCE;
+		return 0;
+	}
+
+	if (!is_wmax_thermal_code(out_data))
+		return -ENODATA;
+
+	out_data &= WMAX_THERMAL_MODE_MASK;
+	*profile = wmax_mode_to_platform_profile[out_data];
+
+	return 0;
+}
+
+static int thermal_profile_set(struct platform_profile_handler *pprof,
+			       enum platform_profile_option profile)
+{
+	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
+
+	if (awcc->gmode) {
+		u32 gmode_status;
+		int ret;
+
+		ret = wmax_game_shift_status(priv->wdev,
+					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
+					     &gmode_status);
+
+		if (ret < 0)
+			return ret;
+
+		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
+		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
+			ret = wmax_game_shift_status(priv->wdev,
+						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
+						     &gmode_status);
+
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return wmax_thermal_control(priv->wdev,
+				    priv->supported_thermal_profiles[profile]);
+}
+
+static int create_thermal_profile(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
+	enum platform_profile_option profile;
+	enum wmax_thermal_mode mode;
+	u8 sys_desc[4];
+	u32 first_mode;
+	u32 out_data;
+	int ret;
+
+	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
+				       0, (u32 *) &sys_desc);
+	if (ret < 0)
+		return ret;
+
+	first_mode = sys_desc[0] + sys_desc[1];
+
+	for (u32 i = 0; i < sys_desc[3]; i++) {
+		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
+					       i + first_mode, &out_data);
+
+		if (ret == -EIO)
+			return ret;
+
+		if (ret == -EBADRQC)
+			break;
+
+		if (!is_wmax_thermal_code(out_data))
+			continue;
+
+		mode = out_data & WMAX_THERMAL_MODE_MASK;
+		profile = wmax_mode_to_platform_profile[mode];
+		priv->supported_thermal_profiles[profile] = out_data;
+
+		set_bit(profile, priv->pp_handler.choices);
+	}
+
+	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
+		return -ENODEV;
+
+	if (awcc->gmode) {
+		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+			WMAX_THERMAL_MODE_GMODE;
+
+		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
+	}
+
+	priv->pp_handler.profile_get = thermal_profile_get;
+	priv->pp_handler.profile_set = thermal_profile_set;
+	priv->pp_handler.name = "alienware-wmi";
+	priv->pp_handler.dev = &wdev->dev;
+
+	return devm_platform_profile_register(&priv->pp_handler);
+}
+
+static int alienware_awcc_setup(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv;
+
+	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(&wdev->dev, priv);
+	priv->wdev = wdev;
+
+	return create_thermal_profile(wdev);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_update_led(struct alienfx_priv *priv,
+			       struct wmi_device *wdev, u8 location)
+{
+	struct wmax_led_args in_args = {
+		.led_mask = 1 << location,
+		.colors = priv->colors[location],
+		.state = priv->lighting_control_state,
+	};
+
+	return alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL, &in_args,
+				     sizeof(in_args), NULL);
+}
+
+static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
+				      struct wmi_device *wdev, u8 brightness)
+{
+	struct wmax_brightness_args in_args = {
+		.led_mask = 0xFF,
+		.percentage = brightness,
+	};
+
+	return alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
+				     sizeof(in_args), NULL);
+}
+
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+		.ops = {
+			.upd_led = wmax_wmi_update_led,
+			.upd_brightness = wmax_wmi_update_brightness,
+		},
+	};
+	struct platform_device *pdev;
+	int ret = 0;
+
+	if (awcc) {
+		return alienware_awcc_setup(wdev);
+	} else {
+		ret = alienware_alienfx_setup(&pdata);
+		if (ret < 0)
+			return ret;
+
+		pdev = dev_get_drvdata(&wdev->dev);
+
+		ret = device_add_groups(&pdev->dev, wmax_alienfx_groups);
+		if (ret < 0)
+			alienware_alienfx_exit(wdev);
+
+		return ret;
+	}
+}
+
+static void wmax_wmi_remove(struct wmi_device *wdev)
+{
+	struct platform_device *pdev;
+
+	if (!awcc) {
+		pdev = dev_get_drvdata(&wdev->dev);
+
+		device_remove_groups(&pdev->dev, wmax_alienfx_groups);
+		alienware_alienfx_exit(wdev);
+	}
+}
+
+static struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.remove = wmax_wmi_remove,
+};
+
+int __init alienware_wmax_wmi_init(void)
+{
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(awcc_dmi_table);
+	if (id)
+		awcc = id->driver_data;
+
+	if (force_platform_profile)
+		awcc = &generic_quirks;
+
+	if (force_gmode) {
+		if (awcc)
+			awcc->gmode = true;
+		else
+			pr_warn("force_gmode requires platform profile support\n");
+	}
+
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
diff --git a/drivers/platform/x86/dell/alienware-wmi.h b/drivers/platform/x86/dell/alienware-wmi.h
index 427203821967..e4b75b1acd10 100644
--- a/drivers/platform/x86/dell/alienware-wmi.h
+++ b/drivers/platform/x86/dell/alienware-wmi.h
@@ -48,7 +48,6 @@ struct color_platform {
 
 struct alienfx_priv {
 	struct platform_device *pdev;
-	struct alienfx_quirks *quirks;
 	struct led_classdev global_led;
 	struct color_platform colors[4];
 	u8 global_brightness;
-- 
2.47.1

[PATCH v3 18/20] platform/x86: dell: Modify Makefile alignment

[Kurt Borja]

Add one more TAB to each line to support upcoming changes.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/Makefile | 48 +++++++++++++++---------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
index 03ba459f3d31..d5718ef34c48 100644
--- a/drivers/platform/x86/dell/Makefile
+++ b/drivers/platform/x86/dell/Makefile
@@ -4,27 +4,27 @@
 # Dell x86 Platform-Specific Drivers
 #
 
-obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
-alienware-wmi-objs			:= alienware-wmi-base.o
-alienware-wmi-y				+= alienware-wmi-legacy.o
-alienware-wmi-y				+= alienware-wmi-wmax.o
-obj-$(CONFIG_DCDBAS)			+= dcdbas.o
-obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
-obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
-obj-$(CONFIG_DELL_PC)			+= dell-pc.o
-obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
-dell-smbios-objs			:= dell-smbios-base.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-lis3lv02d.o
-obj-$(CONFIG_DELL_UART_BACKLIGHT)	+= dell-uart-backlight.o
-obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
-dell-wmi-objs				:= dell-wmi-base.o
-dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)	+= dell-wmi-privacy.o
-obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_DDV)		+= dell-wmi-ddv.o
-obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
-obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
+obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
+alienware-wmi-objs				:= alienware-wmi-base.o
+alienware-wmi-y					+= alienware-wmi-legacy.o
+alienware-wmi-y					+= alienware-wmi-wmax.o
+obj-$(CONFIG_DCDBAS)				+= dcdbas.o
+obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
+obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)				+= dell_rbu.o
+obj-$(CONFIG_DELL_PC)				+= dell-pc.o
+obj-$(CONFIG_DELL_SMBIOS)			+= dell-smbios.o
+dell-smbios-objs				:= dell-smbios-base.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)		+= dell-smbios-wmi.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)		+= dell-smbios-smm.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-smo8800.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-lis3lv02d.o
+obj-$(CONFIG_DELL_UART_BACKLIGHT)		+= dell-uart-backlight.o
+obj-$(CONFIG_DELL_WMI)				+= dell-wmi.o
+dell-wmi-objs					:= dell-wmi-base.o
+dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)		+= dell-wmi-privacy.o
+obj-$(CONFIG_DELL_WMI_AIO)			+= dell-wmi-aio.o
+obj-$(CONFIG_DELL_WMI_DESCRIPTOR)		+= dell-wmi-descriptor.o
+obj-$(CONFIG_DELL_WMI_DDV)			+= dell-wmi-ddv.o
+obj-$(CONFIG_DELL_WMI_LED)			+= dell-wmi-led.o
+obj-$(CONFIG_DELL_WMI_SYSMAN)			+= dell-wmi-sysman/
-- 
2.47.1

[PATCH v3 19/20] platform/x86: Update alienware-wmi config entries

[Kurt Borja]

Add config entries for each WMI driver managed by the alienware-wmi
module to be able to conditionally compile them.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/Kconfig         | 30 +++++++++++++++++++----
 drivers/platform/x86/dell/Makefile        |  4 +--
 drivers/platform/x86/dell/alienware-wmi.h | 23 +++++++++++++++++
 3 files changed, 50 insertions(+), 7 deletions(-)

diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
index d09060aedd3f..f8a0dffcaab7 100644
--- a/drivers/platform/x86/dell/Kconfig
+++ b/drivers/platform/x86/dell/Kconfig
@@ -18,15 +18,35 @@ config ALIENWARE_WMI
 	tristate "Alienware Special feature control"
 	default m
 	depends on ACPI
+	depends on ACPI_WMI
+	depends on DMI
 	depends on LEDS_CLASS
 	depends on NEW_LEDS
-	depends on ACPI_WMI
+	help
+	 This is a driver for controlling Alienware WMI driven features.
+
+	 On legacy devices, it exposes an interface for controlling the AlienFX
+	 zones on Alienware machines that don't contain a dedicated
+	 AlienFX USB MCU such as the X51 and X51-R2.
+
+	 On newer devices, it exposes the AWCC thermal control interface through
+	 known Kernel APIs.
+
+config ALIENWARE_WMI_LEGACY
+	bool "Alienware Legacy WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
+	help
+	 Legacy Alienware WMI driver with AlienFX LED control capabilities.
+
+config ALIENWARE_WMI_WMAX
+	bool "Alienware WMAX WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
 	select ACPI_PLATFORM_PROFILE
 	help
-	 This is a driver for controlling Alienware BIOS driven
-	 features.  It exposes an interface for controlling the AlienFX
-	 zones on Alienware machines that don't contain a dedicated AlienFX
-	 USB MCU such as the X51 and X51-R2.
+	 Alienware WMI driver with AlienFX LED, HDMI, amplifier, deep sleep and
+	 AWCC thermal control capabilities.
 
 config DCDBAS
 	tristate "Dell Systems Management Base Driver"
diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
index d5718ef34c48..8ac9a933c770 100644
--- a/drivers/platform/x86/dell/Makefile
+++ b/drivers/platform/x86/dell/Makefile
@@ -6,8 +6,8 @@
 
 obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
 alienware-wmi-objs				:= alienware-wmi-base.o
-alienware-wmi-y					+= alienware-wmi-legacy.o
-alienware-wmi-y					+= alienware-wmi-wmax.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_LEGACY)	+= alienware-wmi-legacy.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_WMAX)	+= alienware-wmi-wmax.o
 obj-$(CONFIG_DCDBAS)				+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
diff --git a/drivers/platform/x86/dell/alienware-wmi.h b/drivers/platform/x86/dell/alienware-wmi.h
index e4b75b1acd10..a810767a0eb7 100644
--- a/drivers/platform/x86/dell/alienware-wmi.h
+++ b/drivers/platform/x86/dell/alienware-wmi.h
@@ -72,10 +72,33 @@ int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
 int alienware_alienfx_setup(struct alienfx_platdata *pdata);
 void alienware_alienfx_exit(struct wmi_device *wdev);
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_LEGACY)
 int __init alienware_legacy_wmi_init(void);
 void __exit alienware_legacy_wmi_exit(void);
+#else
+static inline int alienware_legacy_wmi_init(void)
+{
+	return -ENODEV;
+}
+
+static inline void alienware_legacy_wmi_exit(void)
+{
+}
+#endif
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
 int __init alienware_wmax_wmi_init(void);
 void __exit alienware_wmax_wmi_exit(void);
+#else
+static inline int alienware_wmax_wmi_init(void)
+{
+	return -ENODEV;
+}
+
+
+static inline void alienware_wmax_wmi_exit(void)
+{
+}
+#endif
 
 #endif
-- 
2.47.1

[PATCH v3 20/20] platform/x86: alienware-wmi: Update header and module information

[Kurt Borja]

Update module header and description. Additionally add myself as a module
author.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-base.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi-base.c b/drivers/platform/x86/dell/alienware-wmi-base.c
index 78101952094c..c98c65341233 100644
--- a/drivers/platform/x86/dell/alienware-wmi-base.c
+++ b/drivers/platform/x86/dell/alienware-wmi-base.c
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Alienware AlienFX control
+ * Alienware special feature control
  *
  * Copyright (C) 2014 Dell Inc <Dell.Client.Kernel@dell.com>
+ * Copyright (C) 2025 Kurt Borja <kuurtb@gmail.com>
  */
 
 #include <linux/acpi.h>
@@ -13,6 +14,7 @@
 #include "alienware-wmi.h"
 
 MODULE_AUTHOR("Mario Limonciello <mario.limonciello@outlook.com>");
+MODULE_AUTHOR("Kurt Borja <kuurtb@gmail.com>");
 MODULE_DESCRIPTION("Alienware special feature control");
 MODULE_LICENSE("GPL");
 
-- 
2.47.1

Re: [PATCH v3 16/20] platform/x86: Add alienware-wmi.h

[kernel test robot]

Hi Kurt,

kernel test robot noticed the following build warnings:

[auto build test WARNING on 6b228cfc52a6e9b7149cf51e247076963d6561cd]

url:    https://github.com/intel-lab-lkp/linux/commits/Kurt-Borja/platform-x86-alienware-wmi-Remove-unnecessary-check-at-module-exit/20250105-233751
base:   6b228cfc52a6e9b7149cf51e247076963d6561cd
patch link:    https://lore.kernel.org/r/20250105153019.19206-18-kuurtb%40gmail.com
patch subject: [PATCH v3 16/20] platform/x86: Add alienware-wmi.h
config: i386-buildonly-randconfig-006-20250105 (https://download.01.org/0day-ci/archive/20250106/202501060332.wvfPD58P-lkp@intel.com/config)
compiler: clang version 19.1.3 (https://github.com/llvm/llvm-project ab51eccf88f5321e7c60591c5546b254b6afab99)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250106/202501060332.wvfPD58P-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202501060332.wvfPD58P-lkp@intel.com/

All warnings (new ones prefixed by >>):

   In file included from drivers/platform/x86/dell/alienware-wmi-base.c:17:
>> drivers/platform/x86/dell/alienware-wmi.h:9:9: warning: 'pr_fmt' macro redefined [-Wmacro-redefined]
       9 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
         |         ^
   include/linux/printk.h:391:9: note: previous definition is here
     391 | #define pr_fmt(fmt) fmt
         |         ^
   1 warning generated.


vim +/pr_fmt +9 drivers/platform/x86/dell/alienware-wmi.h

   > 9	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    10	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH v3 12/20] platform/x86: alienware-wmi: Refactor thermal control methods

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Refactor thermal control methods to use alienware_wmi_command() instead
> of alienware_wmax_command().
> 
> Drop alienware_wmax_command() as there is no more users left.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/alienware-wmi.c | 87 ++++++++---------------
>   1 file changed, 30 insertions(+), 57 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
> index 5918750a3bb1..c75ad7ef3d54 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.c
> +++ b/drivers/platform/x86/dell/alienware-wmi.c
> @@ -665,34 +665,6 @@ static enum led_brightness global_led_get(struct led_classdev *led_cdev)
>   	return priv->global_brightness;
>   }
>   
> -static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
> -					  u32 command, u32 *out_data)
> -{
> -	acpi_status status;
> -	union acpi_object *obj;
> -	struct acpi_buffer input;
> -	struct acpi_buffer output;
> -
> -	input.length = in_size;
> -	input.pointer = in_args;
> -	if (out_data) {
> -		output.length = ACPI_ALLOCATE_BUFFER;
> -		output.pointer = NULL;
> -		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
> -					     command, &input, &output);
> -		if (ACPI_SUCCESS(status)) {
> -			obj = (union acpi_object *)output.pointer;
> -			if (obj && obj->type == ACPI_TYPE_INTEGER)
> -				*out_data = (u32)obj->integer.value;
> -		}
> -		kfree(output.pointer);
> -	} else {
> -		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
> -					     command, &input, NULL);
> -	}
> -	return status;
> -}
> -
>   /*
>    *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
>    *	It can toggle between standard system GPU output and HDMI input.
> @@ -938,7 +910,8 @@ static bool is_wmax_thermal_code(u32 code)
>   	return false;
>   }
>   
> -static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
> +static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
> +				    u8 arg, u32 *out_data)
>   {
>   	struct wmax_u32_args in_args = {
>   		.operation = operation,
> @@ -946,14 +919,12 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
>   		.arg2 = 0,
>   		.arg3 = 0,
>   	};
> -	acpi_status status;
> -
> -	status = alienware_wmax_command(&in_args, sizeof(in_args),
> -					WMAX_METHOD_THERMAL_INFORMATION,
> -					out_data);
> +	int ret;
>   
> -	if (ACPI_FAILURE(status))
> -		return -EIO;
> +	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
> +				    &in_args, sizeof(in_args), out_data);
> +	if (ret < 0)
> +		return ret;
>   
>   	if (*out_data == WMAX_FAILURE_CODE)
>   		return -EBADRQC;
> @@ -961,7 +932,7 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
>   	return 0;
>   }
>   
> -static int wmax_thermal_control(u8 profile)
> +static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
>   {
>   	struct wmax_u32_args in_args = {
>   		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
> @@ -969,15 +940,13 @@ static int wmax_thermal_control(u8 profile)
>   		.arg2 = 0,
>   		.arg3 = 0,
>   	};
> -	acpi_status status;
>   	u32 out_data;
> +	int ret;
>   
> -	status = alienware_wmax_command(&in_args, sizeof(in_args),
> -					WMAX_METHOD_THERMAL_CONTROL,
> -					&out_data);
> -
> -	if (ACPI_FAILURE(status))
> -		return -EIO;
> +	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
> +				    &in_args, sizeof(in_args), &out_data);
> +	if (ret)
> +		return ret;
>   
>   	if (out_data == WMAX_FAILURE_CODE)
>   		return -EBADRQC;
> @@ -985,7 +954,8 @@ static int wmax_thermal_control(u8 profile)
>   	return 0;
>   }
>   
> -static int wmax_game_shift_status(u8 operation, u32 *out_data)
> +static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
> +				  u32 *out_data)
>   {
>   	struct wmax_u32_args in_args = {
>   		.operation = operation,
> @@ -993,14 +963,13 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
>   		.arg2 = 0,
>   		.arg3 = 0,
>   	};
> -	acpi_status status;
> +	int ret;
>   
> -	status = alienware_wmax_command(&in_args, sizeof(in_args),
> -					WMAX_METHOD_GAME_SHIFT_STATUS,
> -					out_data);
> +	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
> +				    &in_args, sizeof(in_args), out_data);
>   
> -	if (ACPI_FAILURE(status))
> -		return -EIO;
> +	if (ret < 0)
> +		return ret;
>   
>   	if (*out_data == WMAX_FAILURE_CODE)
>   		return -EOPNOTSUPP;
> @@ -1011,10 +980,11 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
>   static int thermal_profile_get(struct platform_profile_handler *pprof,
>   			       enum platform_profile_option *profile)
>   {
> +	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
>   	u32 out_data;
>   	int ret;
>   
> -	ret = wmax_thermal_information(WMAX_OPERATION_CURRENT_PROFILE,
> +	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
>   				       0, &out_data);
>   
>   	if (ret < 0)
> @@ -1043,7 +1013,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
>   		u32 gmode_status;
>   		int ret;
>   
> -		ret = wmax_game_shift_status(WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
> +		ret = wmax_game_shift_status(priv->wdev,
> +					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
>   					     &gmode_status);
>   
>   		if (ret < 0)
> @@ -1051,7 +1022,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
>   
>   		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
>   		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
> -			ret = wmax_game_shift_status(WMAX_OPERATION_TOGGLE_GAME_SHIFT,
> +			ret = wmax_game_shift_status(priv->wdev,
> +						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
>   						     &gmode_status);
>   
>   			if (ret < 0)
> @@ -1059,7 +1031,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
>   		}
>   	}
>   
> -	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
> +	return wmax_thermal_control(priv->wdev,
> +				    priv->supported_thermal_profiles[profile]);
>   }
>   
>   static int create_thermal_profile(struct wmi_device *wdev)
> @@ -1072,7 +1045,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
>   	u32 out_data;
>   	int ret;
>   
> -	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
> +	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
>   				       0, (u32 *) &sys_desc);
>   	if (ret < 0)
>   		return ret;
> @@ -1080,7 +1053,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
>   	first_mode = sys_desc[0] + sys_desc[1];
>   
>   	for (u32 i = 0; i < sys_desc[3]; i++) {
> -		ret = wmax_thermal_information(WMAX_OPERATION_LIST_IDS,
> +		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
>   					       i + first_mode, &out_data);
>   
>   		if (ret == -EIO)

Re: [PATCH v3 18/20] platform/x86: dell: Modify Makefile alignment

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Add one more TAB to each line to support upcoming changes.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/Makefile | 48 +++++++++++++++---------------
>   1 file changed, 24 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
> index 03ba459f3d31..d5718ef34c48 100644
> --- a/drivers/platform/x86/dell/Makefile
> +++ b/drivers/platform/x86/dell/Makefile
> @@ -4,27 +4,27 @@
>   # Dell x86 Platform-Specific Drivers
>   #
>   
> -obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
> -alienware-wmi-objs			:= alienware-wmi-base.o
> -alienware-wmi-y				+= alienware-wmi-legacy.o
> -alienware-wmi-y				+= alienware-wmi-wmax.o
> -obj-$(CONFIG_DCDBAS)			+= dcdbas.o
> -obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
> -obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
> -obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
> -obj-$(CONFIG_DELL_PC)			+= dell-pc.o
> -obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
> -dell-smbios-objs			:= dell-smbios-base.o
> -dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
> -dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
> -obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
> -obj-$(CONFIG_DELL_SMO8800)		+= dell-lis3lv02d.o
> -obj-$(CONFIG_DELL_UART_BACKLIGHT)	+= dell-uart-backlight.o
> -obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
> -dell-wmi-objs				:= dell-wmi-base.o
> -dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)	+= dell-wmi-privacy.o
> -obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
> -obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
> -obj-$(CONFIG_DELL_WMI_DDV)		+= dell-wmi-ddv.o
> -obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
> -obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
> +obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
> +alienware-wmi-objs				:= alienware-wmi-base.o
> +alienware-wmi-y					+= alienware-wmi-legacy.o
> +alienware-wmi-y					+= alienware-wmi-wmax.o
> +obj-$(CONFIG_DCDBAS)				+= dcdbas.o
> +obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
> +obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
> +obj-$(CONFIG_DELL_RBU)				+= dell_rbu.o
> +obj-$(CONFIG_DELL_PC)				+= dell-pc.o
> +obj-$(CONFIG_DELL_SMBIOS)			+= dell-smbios.o
> +dell-smbios-objs				:= dell-smbios-base.o
> +dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)		+= dell-smbios-wmi.o
> +dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)		+= dell-smbios-smm.o
> +obj-$(CONFIG_DELL_SMO8800)			+= dell-smo8800.o
> +obj-$(CONFIG_DELL_SMO8800)			+= dell-lis3lv02d.o
> +obj-$(CONFIG_DELL_UART_BACKLIGHT)		+= dell-uart-backlight.o
> +obj-$(CONFIG_DELL_WMI)				+= dell-wmi.o
> +dell-wmi-objs					:= dell-wmi-base.o
> +dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)		+= dell-wmi-privacy.o
> +obj-$(CONFIG_DELL_WMI_AIO)			+= dell-wmi-aio.o
> +obj-$(CONFIG_DELL_WMI_DESCRIPTOR)		+= dell-wmi-descriptor.o
> +obj-$(CONFIG_DELL_WMI_DDV)			+= dell-wmi-ddv.o
> +obj-$(CONFIG_DELL_WMI_LED)			+= dell-wmi-led.o
> +obj-$(CONFIG_DELL_WMI_SYSMAN)			+= dell-wmi-sysman/

Re: [PATCH v3 19/20] platform/x86: Update alienware-wmi config entries

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Add config entries for each WMI driver managed by the alienware-wmi
> module to be able to conditionally compile them.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/Kconfig         | 30 +++++++++++++++++++----
>   drivers/platform/x86/dell/Makefile        |  4 +--
>   drivers/platform/x86/dell/alienware-wmi.h | 23 +++++++++++++++++
>   3 files changed, 50 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
> index d09060aedd3f..f8a0dffcaab7 100644
> --- a/drivers/platform/x86/dell/Kconfig
> +++ b/drivers/platform/x86/dell/Kconfig
> @@ -18,15 +18,35 @@ config ALIENWARE_WMI
>   	tristate "Alienware Special feature control"
>   	default m
>   	depends on ACPI
> +	depends on ACPI_WMI
> +	depends on DMI
>   	depends on LEDS_CLASS
>   	depends on NEW_LEDS
> -	depends on ACPI_WMI
> +	help
> +	 This is a driver for controlling Alienware WMI driven features.
> +
> +	 On legacy devices, it exposes an interface for controlling the AlienFX
> +	 zones on Alienware machines that don't contain a dedicated
> +	 AlienFX USB MCU such as the X51 and X51-R2.
> +
> +	 On newer devices, it exposes the AWCC thermal control interface through
> +	 known Kernel APIs.
> +
> +config ALIENWARE_WMI_LEGACY
> +	bool "Alienware Legacy WMI device driver"
> +	default y
> +	depends on ALIENWARE_WMI
> +	help
> +	 Legacy Alienware WMI driver with AlienFX LED control capabilities.
> +
> +config ALIENWARE_WMI_WMAX
> +	bool "Alienware WMAX WMI device driver"
> +	default y
> +	depends on ALIENWARE_WMI
>   	select ACPI_PLATFORM_PROFILE
>   	help
> -	 This is a driver for controlling Alienware BIOS driven
> -	 features.  It exposes an interface for controlling the AlienFX
> -	 zones on Alienware machines that don't contain a dedicated AlienFX
> -	 USB MCU such as the X51 and X51-R2.
> +	 Alienware WMI driver with AlienFX LED, HDMI, amplifier, deep sleep and
> +	 AWCC thermal control capabilities.
>   
>   config DCDBAS
>   	tristate "Dell Systems Management Base Driver"
> diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
> index d5718ef34c48..8ac9a933c770 100644
> --- a/drivers/platform/x86/dell/Makefile
> +++ b/drivers/platform/x86/dell/Makefile
> @@ -6,8 +6,8 @@
>   
>   obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
>   alienware-wmi-objs				:= alienware-wmi-base.o
> -alienware-wmi-y					+= alienware-wmi-legacy.o
> -alienware-wmi-y					+= alienware-wmi-wmax.o
> +alienware-wmi-$(CONFIG_ALIENWARE_WMI_LEGACY)	+= alienware-wmi-legacy.o
> +alienware-wmi-$(CONFIG_ALIENWARE_WMI_WMAX)	+= alienware-wmi-wmax.o
>   obj-$(CONFIG_DCDBAS)				+= dcdbas.o
>   obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
>   obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
> diff --git a/drivers/platform/x86/dell/alienware-wmi.h b/drivers/platform/x86/dell/alienware-wmi.h
> index e4b75b1acd10..a810767a0eb7 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.h
> +++ b/drivers/platform/x86/dell/alienware-wmi.h
> @@ -72,10 +72,33 @@ int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
>   int alienware_alienfx_setup(struct alienfx_platdata *pdata);
>   void alienware_alienfx_exit(struct wmi_device *wdev);
>   
> +#if IS_ENABLED(CONFIG_ALIENWARE_WMI_LEGACY)
>   int __init alienware_legacy_wmi_init(void);
>   void __exit alienware_legacy_wmi_exit(void);
> +#else
> +static inline int alienware_legacy_wmi_init(void)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline void alienware_legacy_wmi_exit(void)
> +{
> +}
> +#endif
>   
> +#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
>   int __init alienware_wmax_wmi_init(void);
>   void __exit alienware_wmax_wmi_exit(void);
> +#else
> +static inline int alienware_wmax_wmi_init(void)
> +{
> +	return -ENODEV;
> +}
> +
> +
> +static inline void alienware_wmax_wmi_exit(void)
> +{
> +}
> +#endif
>   
>   #endif

Re: [PATCH v3 17/20] platform/x86: Split the alienware-wmi driver

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Split alienware-wmi WMI drivers into different files. This is done
> seamlessly by copying and pasting, however some blocks are reordered.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/Makefile            |   2 +
>   .../platform/x86/dell/alienware-wmi-base.c    | 847 +-----------------
>   .../platform/x86/dell/alienware-wmi-legacy.c  |  98 ++
>   .../platform/x86/dell/alienware-wmi-wmax.c    | 767 ++++++++++++++++
>   drivers/platform/x86/dell/alienware-wmi.h     |   1 -
>   5 files changed, 868 insertions(+), 847 deletions(-)
>   create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
>   create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
> 
> diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
> index f8aec8502c2f..03ba459f3d31 100644
> --- a/drivers/platform/x86/dell/Makefile
> +++ b/drivers/platform/x86/dell/Makefile
> @@ -6,6 +6,8 @@
>   
>   obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
>   alienware-wmi-objs			:= alienware-wmi-base.o
> +alienware-wmi-y				+= alienware-wmi-legacy.o
> +alienware-wmi-y				+= alienware-wmi-wmax.o
>   obj-$(CONFIG_DCDBAS)			+= dcdbas.o
>   obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
>   obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
> diff --git a/drivers/platform/x86/dell/alienware-wmi-base.c b/drivers/platform/x86/dell/alienware-wmi-base.c
> index 9fa5ac48436e..78101952094c 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-base.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-base.c
> @@ -6,96 +6,21 @@
>    */
>   
>   #include <linux/acpi.h>
> -#include <linux/bitfield.h>
> -#include <linux/bits.h>
>   #include <linux/module.h>
>   #include <linux/platform_device.h>
> -#include <linux/platform_profile.h>
>   #include <linux/dmi.h>
>   #include <linux/leds.h>
> -#include <linux/wmi.h>
>   #include "alienware-wmi.h"
>   
> -#define WMAX_METHOD_HDMI_SOURCE		0x1
> -#define WMAX_METHOD_HDMI_STATUS		0x2
> -#define WMAX_METHOD_BRIGHTNESS		0x3
> -#define WMAX_METHOD_ZONE_CONTROL	0x4
> -#define WMAX_METHOD_HDMI_CABLE		0x5
> -#define WMAX_METHOD_AMPLIFIER_CABLE	0x6
> -#define WMAX_METHOD_DEEP_SLEEP_CONTROL	0x0B
> -#define WMAX_METHOD_DEEP_SLEEP_STATUS	0x0C
> -#define WMAX_METHOD_THERMAL_INFORMATION	0x14
> -#define WMAX_METHOD_THERMAL_CONTROL	0x15
> -#define WMAX_METHOD_GAME_SHIFT_STATUS	0x25
> -
> -#define WMAX_THERMAL_MODE_GMODE		0xAB
> -
> -#define WMAX_FAILURE_CODE		0xFFFFFFFF
> -
>   MODULE_AUTHOR("Mario Limonciello <mario.limonciello@outlook.com>");
>   MODULE_DESCRIPTION("Alienware special feature control");
>   MODULE_LICENSE("GPL");
>   
> -static bool force_platform_profile;
> -module_param_unsafe(force_platform_profile, bool, 0);
> -MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
> -
> -static bool force_gmode;
> -module_param_unsafe(force_gmode, bool, 0);
> -MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected");
> -
>   enum INTERFACE_FLAGS {
>   	LEGACY,
>   	WMAX,
>   };
>   
> -enum WMAX_THERMAL_INFORMATION_OPERATIONS {
> -	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
> -	WMAX_OPERATION_LIST_IDS			= 0x03,
> -	WMAX_OPERATION_CURRENT_PROFILE		= 0x0B,
> -};
> -
> -enum WMAX_THERMAL_CONTROL_OPERATIONS {
> -	WMAX_OPERATION_ACTIVATE_PROFILE		= 0x01,
> -};
> -
> -enum WMAX_GAME_SHIFT_STATUS_OPERATIONS {
> -	WMAX_OPERATION_TOGGLE_GAME_SHIFT	= 0x01,
> -	WMAX_OPERATION_GET_GAME_SHIFT_STATUS	= 0x02,
> -};
> -
> -enum WMAX_THERMAL_TABLES {
> -	WMAX_THERMAL_TABLE_BASIC		= 0x90,
> -	WMAX_THERMAL_TABLE_USTT			= 0xA0,
> -};
> -
> -enum wmax_thermal_mode {
> -	THERMAL_MODE_USTT_BALANCED,
> -	THERMAL_MODE_USTT_BALANCED_PERFORMANCE,
> -	THERMAL_MODE_USTT_COOL,
> -	THERMAL_MODE_USTT_QUIET,
> -	THERMAL_MODE_USTT_PERFORMANCE,
> -	THERMAL_MODE_USTT_LOW_POWER,
> -	THERMAL_MODE_BASIC_QUIET,
> -	THERMAL_MODE_BASIC_BALANCED,
> -	THERMAL_MODE_BASIC_BALANCED_PERFORMANCE,
> -	THERMAL_MODE_BASIC_PERFORMANCE,
> -	THERMAL_MODE_LAST,
> -};
> -
> -static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_MODE_LAST] = {
> -	[THERMAL_MODE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
> -	[THERMAL_MODE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> -	[THERMAL_MODE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
> -	[THERMAL_MODE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
> -	[THERMAL_MODE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
> -	[THERMAL_MODE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
> -	[THERMAL_MODE_BASIC_QUIET]			= PLATFORM_PROFILE_QUIET,
> -	[THERMAL_MODE_BASIC_BALANCED]			= PLATFORM_PROFILE_BALANCED,
> -	[THERMAL_MODE_BASIC_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> -	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
> -};
> -
>   struct alienfx_quirks *alienfx;
>   
>   static struct alienfx_quirks quirk_inspiron5675 = {
> @@ -220,138 +145,7 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
>   	{}
>   };
>   
> -struct wmax_brightness_args {
> -	u32 led_mask;
> -	u32 percentage;
> -};
> -
> -struct wmax_basic_args {
> -	u8 arg;
> -};
> -
> -struct legacy_led_args {
> -	struct color_platform colors;
> -	u8 brightness;
> -	u8 state;
> -} __packed;
> -
> -struct wmax_led_args {
> -	u32 led_mask;
> -	struct color_platform colors;
> -	u8 state;
> -} __packed;
> -
> -struct wmax_u32_args {
> -	u8 operation;
> -	u8 arg1;
> -	u8 arg2;
> -	u8 arg3;
> -};
> -
> -struct awcc_priv {
> -	struct wmi_device *wdev;
> -	struct platform_profile_handler pp_handler;
> -	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
> -};
> -
> -static u8 interface;
> -
> -struct awcc_quirks {
> -	bool gmode;
> -};
> -
> -static struct awcc_quirks g_series_quirks = {
> -	.gmode = true,
> -};
> -
> -static struct awcc_quirks generic_quirks = {
> -	.gmode = false,
> -};
> -
> -static const struct dmi_system_id awcc_dmi_table[] __initconst = {
> -	{
> -		.ident = "Alienware m17 R5",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
> -		},
> -		.driver_data = &generic_quirks,
> -	},
> -	{
> -		.ident = "Alienware m18 R2",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
> -		},
> -		.driver_data = &generic_quirks,
> -	},
> -	{
> -		.ident = "Alienware x15 R1",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
> -		},
> -		.driver_data = &generic_quirks,
> -	},
> -	{
> -		.ident = "Alienware x17 R2",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
> -		},
> -		.driver_data = &generic_quirks,
> -	},
> -	{
> -		.ident = "Dell Inc. G15 5510",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
> -		},
> -		.driver_data = &g_series_quirks,
> -	},
> -	{
> -		.ident = "Dell Inc. G15 5511",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
> -		},
> -		.driver_data = &g_series_quirks,
> -	},
> -	{
> -		.ident = "Dell Inc. G15 5515",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
> -		},
> -		.driver_data = &g_series_quirks,
> -	},
> -	{
> -		.ident = "Dell Inc. G3 3500",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
> -		},
> -		.driver_data = &g_series_quirks,
> -	},
> -	{
> -		.ident = "Dell Inc. G3 3590",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
> -		},
> -		.driver_data = &g_series_quirks,
> -	},
> -	{
> -		.ident = "Dell Inc. G5 5500",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
> -		},
> -		.driver_data = &g_series_quirks,
> -	},
> -};
> -
> -struct awcc_quirks *awcc;
> +u8 interface;
>   
>   int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
>   			  void *in_args, size_t in_size, u32 *out_data)
> @@ -587,445 +381,6 @@ static enum led_brightness global_led_get(struct led_classdev *led_cdev)
>   	return priv->global_brightness;
>   }
>   
> -/*
> - *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
> - *	It can toggle between standard system GPU output and HDMI input.
> - */
> -static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
> -			  char *buf)
> -{
> -	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> -	struct wmax_basic_args in_args = {
> -		.arg = 0,
> -	};
> -	u32 out_data;
> -	int ret;
> -
> -	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
> -				    &in_args, sizeof(in_args), &out_data);
> -
> -	if (!ret) {
> -		if (out_data == 0)
> -			return sysfs_emit(buf, "[unconnected] connected unknown\n");
> -		else if (out_data == 1)
> -			return sysfs_emit(buf, "unconnected [connected] unknown\n");
> -	}
> -
> -	pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret);
> -	return sysfs_emit(buf, "unconnected connected [unknown]\n");
> -}
> -
> -static ssize_t source_show(struct device *dev, struct device_attribute *attr,
> -			   char *buf)
> -{
> -	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> -	struct wmax_basic_args in_args = {
> -		.arg = 0,
> -	};
> -	u32 out_data;
> -	int ret;
> -
> -	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
> -				    &in_args, sizeof(in_args), &out_data);
> -
> -	if (!ret) {
> -		if (out_data == 1)
> -			return sysfs_emit(buf, "[input] gpu unknown\n");
> -		else if (out_data == 2)
> -			return sysfs_emit(buf, "input [gpu] unknown\n");
> -	}
> -
> -	pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret);
> -	return sysfs_emit(buf, "input gpu [unknown]\n");
> -}
> -
> -static ssize_t source_store(struct device *dev, struct device_attribute *attr,
> -			    const char *buf, size_t count)
> -{
> -	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> -	struct wmax_basic_args args;
> -	int ret;
> -
> -	if (strcmp(buf, "gpu\n") == 0)
> -		args.arg = 1;
> -	else if (strcmp(buf, "input\n") == 0)
> -		args.arg = 2;
> -	else
> -		args.arg = 3;
> -	pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
> -
> -	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE, &args,
> -				    sizeof(args), NULL);
> -
> -	if (ret < 0)
> -		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret);
> -
> -	return count;
> -}
> -
> -static DEVICE_ATTR_RO(cable);
> -static DEVICE_ATTR_RW(source);
> -
> -static bool hdmi_group_visible(struct kobject *kobj)
> -{
> -	return alienfx->hdmi_mux;
> -}
> -DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
> -
> -static struct attribute *hdmi_attrs[] = {
> -	&dev_attr_cable.attr,
> -	&dev_attr_source.attr,
> -	NULL,
> -};
> -
> -static const struct attribute_group hdmi_attribute_group = {
> -	.name = "hdmi",
> -	.is_visible = SYSFS_GROUP_VISIBLE(hdmi),
> -	.attrs = hdmi_attrs,
> -};
> -
> -/*
> - * Alienware GFX amplifier support
> - * - Currently supports reading cable status
> - * - Leaving expansion room to possibly support dock/undock events later
> - */
> -static ssize_t status_show(struct device *dev, struct device_attribute *attr,
> -			   char *buf)
> -{
> -	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> -	struct wmax_basic_args in_args = {
> -		.arg = 0,
> -	};
> -	u32 out_data;
> -	int ret;
> -
> -	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
> -				    &in_args, sizeof(in_args), &out_data);
> -
> -	if (!ret) {
> -		if (out_data == 0)
> -			return sysfs_emit(buf, "[unconnected] connected unknown\n");
> -		else if (out_data == 1)
> -			return sysfs_emit(buf, "unconnected [connected] unknown\n");
> -	}
> -
> -	pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret);
> -	return sysfs_emit(buf, "unconnected connected [unknown]\n");
> -}
> -
> -static DEVICE_ATTR_RO(status);
> -
> -static bool amplifier_group_visible(struct kobject *kobj)
> -{
> -	return alienfx->amplifier;
> -}
> -DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
> -
> -static struct attribute *amplifier_attrs[] = {
> -	&dev_attr_status.attr,
> -	NULL,
> -};
> -
> -static const struct attribute_group amplifier_attribute_group = {
> -	.name = "amplifier",
> -	.is_visible = SYSFS_GROUP_VISIBLE(amplifier),
> -	.attrs = amplifier_attrs,
> -};
> -
> -/*
> - * Deep Sleep Control support
> - * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
> - */
> -static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
> -			      char *buf)
> -{
> -	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> -	struct wmax_basic_args in_args = {
> -		.arg = 0,
> -	};
> -	u32 out_data;
> -	int ret;
> -
> -	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
> -				    &in_args, sizeof(in_args), &out_data);
> -
> -	if (!ret) {
> -		if (out_data == 0)
> -			return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
> -		else if (out_data == 1)
> -			return sysfs_emit(buf, "disabled [s5] s5_s4\n");
> -		else if (out_data == 2)
> -			return sysfs_emit(buf, "disabled s5 [s5_s4]\n");
> -	}
> -
> -	pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret);
> -	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
> -}
> -
> -static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
> -			       const char *buf, size_t count)
> -{
> -	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> -	struct wmax_basic_args args;
> -	int ret;
> -
> -	if (strcmp(buf, "disabled\n") == 0)
> -		args.arg = 0;
> -	else if (strcmp(buf, "s5\n") == 0)
> -		args.arg = 1;
> -	else
> -		args.arg = 2;
> -	pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
> -
> -	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
> -				    &args, sizeof(args), NULL);
> -
> -	if (!ret)
> -		pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret);
> -
> -	return count;
> -}
> -
> -static DEVICE_ATTR_RW(deepsleep);
> -
> -static bool deepsleep_group_visible(struct kobject *kobj)
> -{
> -	return alienfx->deepslp;
> -}
> -DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
> -
> -static struct attribute *deepsleep_attrs[] = {
> -	&dev_attr_deepsleep.attr,
> -	NULL,
> -};
> -
> -static const struct attribute_group deepsleep_attribute_group = {
> -	.name = "deepsleep",
> -	.is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
> -	.attrs = deepsleep_attrs,
> -};
> -
> -/*
> - * Thermal Profile control
> - *  - Provides thermal profile control through the Platform Profile API
> - */
> -#define WMAX_THERMAL_TABLE_MASK		GENMASK(7, 4)
> -#define WMAX_THERMAL_MODE_MASK		GENMASK(3, 0)
> -#define WMAX_SENSOR_ID_MASK		BIT(8)
> -
> -static bool is_wmax_thermal_code(u32 code)
> -{
> -	if (code & WMAX_SENSOR_ID_MASK)
> -		return false;
> -
> -	if ((code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_LAST)
> -		return false;
> -
> -	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_BASIC &&
> -	    (code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_BASIC_QUIET)
> -		return true;
> -
> -	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_USTT &&
> -	    (code & WMAX_THERMAL_MODE_MASK) <= THERMAL_MODE_USTT_LOW_POWER)
> -		return true;
> -
> -	return false;
> -}
> -
> -static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
> -				    u8 arg, u32 *out_data)
> -{
> -	struct wmax_u32_args in_args = {
> -		.operation = operation,
> -		.arg1 = arg,
> -		.arg2 = 0,
> -		.arg3 = 0,
> -	};
> -	int ret;
> -
> -	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
> -				    &in_args, sizeof(in_args), out_data);
> -	if (ret < 0)
> -		return ret;
> -
> -	if (*out_data == WMAX_FAILURE_CODE)
> -		return -EBADRQC;
> -
> -	return 0;
> -}
> -
> -static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
> -{
> -	struct wmax_u32_args in_args = {
> -		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
> -		.arg1 = profile,
> -		.arg2 = 0,
> -		.arg3 = 0,
> -	};
> -	u32 out_data;
> -	int ret;
> -
> -	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
> -				    &in_args, sizeof(in_args), &out_data);
> -	if (ret)
> -		return ret;
> -
> -	if (out_data == WMAX_FAILURE_CODE)
> -		return -EBADRQC;
> -
> -	return 0;
> -}
> -
> -static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
> -				  u32 *out_data)
> -{
> -	struct wmax_u32_args in_args = {
> -		.operation = operation,
> -		.arg1 = 0,
> -		.arg2 = 0,
> -		.arg3 = 0,
> -	};
> -	int ret;
> -
> -	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
> -				    &in_args, sizeof(in_args), out_data);
> -
> -	if (ret < 0)
> -		return ret;
> -
> -	if (*out_data == WMAX_FAILURE_CODE)
> -		return -EOPNOTSUPP;
> -
> -	return 0;
> -}
> -
> -static int thermal_profile_get(struct platform_profile_handler *pprof,
> -			       enum platform_profile_option *profile)
> -{
> -	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
> -	u32 out_data;
> -	int ret;
> -
> -	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
> -				       0, &out_data);
> -
> -	if (ret < 0)
> -		return ret;
> -
> -	if (out_data == WMAX_THERMAL_MODE_GMODE) {
> -		*profile = PLATFORM_PROFILE_PERFORMANCE;
> -		return 0;
> -	}
> -
> -	if (!is_wmax_thermal_code(out_data))
> -		return -ENODATA;
> -
> -	out_data &= WMAX_THERMAL_MODE_MASK;
> -	*profile = wmax_mode_to_platform_profile[out_data];
> -
> -	return 0;
> -}
> -
> -static int thermal_profile_set(struct platform_profile_handler *pprof,
> -			       enum platform_profile_option profile)
> -{
> -	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
> -
> -	if (awcc->gmode) {
> -		u32 gmode_status;
> -		int ret;
> -
> -		ret = wmax_game_shift_status(priv->wdev,
> -					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
> -					     &gmode_status);
> -
> -		if (ret < 0)
> -			return ret;
> -
> -		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
> -		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
> -			ret = wmax_game_shift_status(priv->wdev,
> -						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
> -						     &gmode_status);
> -
> -			if (ret < 0)
> -				return ret;
> -		}
> -	}
> -
> -	return wmax_thermal_control(priv->wdev,
> -				    priv->supported_thermal_profiles[profile]);
> -}
> -
> -static int create_thermal_profile(struct wmi_device *wdev)
> -{
> -	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
> -	enum platform_profile_option profile;
> -	enum wmax_thermal_mode mode;
> -	u8 sys_desc[4];
> -	u32 first_mode;
> -	u32 out_data;
> -	int ret;
> -
> -	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
> -				       0, (u32 *) &sys_desc);
> -	if (ret < 0)
> -		return ret;
> -
> -	first_mode = sys_desc[0] + sys_desc[1];
> -
> -	for (u32 i = 0; i < sys_desc[3]; i++) {
> -		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
> -					       i + first_mode, &out_data);
> -
> -		if (ret == -EIO)
> -			return ret;
> -
> -		if (ret == -EBADRQC)
> -			break;
> -
> -		if (!is_wmax_thermal_code(out_data))
> -			continue;
> -
> -		mode = out_data & WMAX_THERMAL_MODE_MASK;
> -		profile = wmax_mode_to_platform_profile[mode];
> -		priv->supported_thermal_profiles[profile] = out_data;
> -
> -		set_bit(profile, priv->pp_handler.choices);
> -	}
> -
> -	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
> -		return -ENODEV;
> -
> -	if (awcc->gmode) {
> -		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
> -			WMAX_THERMAL_MODE_GMODE;
> -
> -		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
> -	}
> -
> -	priv->pp_handler.profile_get = thermal_profile_get;
> -	priv->pp_handler.profile_set = thermal_profile_set;
> -	priv->pp_handler.name = "alienware-wmi";
> -	priv->pp_handler.dev = &wdev->dev;
> -
> -	return devm_platform_profile_register(&priv->pp_handler);
> -}
> -
> -static int alienware_awcc_setup(struct wmi_device *wdev)
> -{
> -	struct awcc_priv *priv;
> -
> -	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
> -	if (!priv)
> -		return -ENOMEM;
> -
> -	dev_set_drvdata(&wdev->dev, priv);
> -	priv->wdev = wdev;
> -
> -	return create_thermal_profile(wdev);
> -}
> -
>   /*
>    * Platform Driver
>    */
> @@ -1060,13 +415,6 @@ static const struct attribute_group *alienfx_groups[] = {
>   	NULL
>   };
>   
> -static const struct attribute_group *wmax_alienfx_groups[] = {
> -	&hdmi_attribute_group,
> -	&amplifier_attribute_group,
> -	&deepsleep_attribute_group,
> -	NULL
> -};
> -
>   static struct platform_driver platform_driver = {
>   	.driver = {
>   		.name = "alienware-wmi",
> @@ -1106,199 +454,6 @@ void alienware_alienfx_exit(struct wmi_device *wdev)
>   	platform_driver_unregister(&platform_driver);
>   }
>   
> -/*
> - * Legacy WMI driver
> - */
> -static int legacy_wmi_update_led(struct alienfx_priv *priv,
> -				 struct wmi_device *wdev, u8 location)
> -{
> -	struct legacy_led_args legacy_args = {
> -		.colors = priv->colors[location],
> -		.brightness = priv->global_brightness,
> -		.state = 0,
> -	};
> -	struct acpi_buffer input;
> -	acpi_status status;
> -
> -	if (legacy_args.state != LEGACY_RUNNING) {
> -		legacy_args.state = priv->lighting_control_state;
> -
> -		input.length = sizeof(legacy_args);
> -		input.pointer = &legacy_args;
> -
> -		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
> -					     location + 1, &input, NULL);
> -		if (ACPI_FAILURE(status))
> -			return -EIO;
> -
> -		return 0;
> -	}
> -
> -	return alienware_wmi_command(wdev, location + 1, &legacy_args,
> -				     sizeof(legacy_args), NULL);
> -}
> -
> -static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
> -					struct wmi_device *wdev, u8 brightness)
> -{
> -	return legacy_wmi_update_led(priv, wdev, 0);
> -}
> -
> -static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
> -{
> -	struct alienfx_platdata pdata = {
> -		.wdev = wdev,
> -		.ops = {
> -			.upd_led = legacy_wmi_update_led,
> -			.upd_brightness = legacy_wmi_update_brightness,
> -		},
> -	};
> -
> -	return alienware_alienfx_setup(&pdata);
> -}
> -
> -static void legacy_wmi_remove(struct wmi_device *wdev)
> -{
> -	alienware_alienfx_exit(wdev);
> -}
> -
> -static struct wmi_device_id alienware_legacy_device_id_table[] = {
> -	{ LEGACY_CONTROL_GUID, NULL },
> -	{ },
> -};
> -MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
> -
> -static struct wmi_driver alienware_legacy_wmi_driver = {
> -	.driver = {
> -		.name = "alienware-wmi-alienfx",
> -		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> -	},
> -	.id_table = alienware_legacy_device_id_table,
> -	.probe = legacy_wmi_probe,
> -	.remove = legacy_wmi_remove,
> -};
> -
> -int __init alienware_legacy_wmi_init(void)
> -{
> -	return wmi_driver_register(&alienware_legacy_wmi_driver);
> -}
> -
> -void __exit alienware_legacy_wmi_exit(void)
> -{
> -	wmi_driver_unregister(&alienware_legacy_wmi_driver);
> -}
> -
> -/*
> - * WMAX WMI driver
> - */
> -static int wmax_wmi_update_led(struct alienfx_priv *priv,
> -			       struct wmi_device *wdev, u8 location)
> -{
> -	struct wmax_led_args in_args = {
> -		.led_mask = 1 << location,
> -		.colors = priv->colors[location],
> -		.state = priv->lighting_control_state,
> -	};
> -
> -	return alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL, &in_args,
> -				     sizeof(in_args), NULL);
> -}
> -
> -static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
> -				      struct wmi_device *wdev, u8 brightness)
> -{
> -	struct wmax_brightness_args in_args = {
> -		.led_mask = 0xFF,
> -		.percentage = brightness,
> -	};
> -
> -	return alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
> -				     sizeof(in_args), NULL);
> -}
> -
> -static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
> -{
> -	struct alienfx_platdata pdata = {
> -		.wdev = wdev,
> -		.ops = {
> -			.upd_led = wmax_wmi_update_led,
> -			.upd_brightness = wmax_wmi_update_brightness,
> -		},
> -	};
> -	struct platform_device *pdev;
> -	int ret;
> -
> -	if (awcc) {
> -		return alienware_awcc_setup(wdev);
> -	} else {
> -		ret = alienware_alienfx_setup(&pdata);
> -		if (ret < 0)
> -			return ret;
> -
> -		pdev = dev_get_drvdata(&wdev->dev);
> -
> -		ret = device_add_groups(&pdev->dev, wmax_alienfx_groups);
> -		if (ret < 0)
> -			alienware_alienfx_exit(wdev);
> -
> -		return ret;
> -	}
> -}
> -
> -static void wmax_wmi_remove(struct wmi_device *wdev)
> -{
> -	struct platform_device *pdev;
> -
> -	if (!awcc) {
> -		pdev = dev_get_drvdata(&wdev->dev);
> -
> -		device_remove_groups(&pdev->dev, wmax_alienfx_groups);
> -		alienware_alienfx_exit(wdev);
> -	}
> -}
> -
> -static struct wmi_device_id alienware_wmax_device_id_table[] = {
> -	{ WMAX_CONTROL_GUID, NULL },
> -	{ },
> -};
> -MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
> -
> -static struct wmi_driver alienware_wmax_wmi_driver = {
> -	.driver = {
> -		.name = "alienware-wmi-wmax",
> -		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> -	},
> -	.id_table = alienware_wmax_device_id_table,
> -	.probe = wmax_wmi_probe,
> -	.remove = wmax_wmi_remove,
> -};
> -
> -int __init alienware_wmax_wmi_init(void)
> -{
> -	const struct dmi_system_id *id;
> -
> -	id = dmi_first_match(awcc_dmi_table);
> -	if (id)
> -		awcc = id->driver_data;
> -
> -	if (force_platform_profile)
> -		awcc = &generic_quirks;
> -
> -	if (force_gmode) {
> -		if (awcc)
> -			awcc->gmode = true;
> -		else
> -			pr_warn("force_gmode requires platform profile support\n");
> -	}
> -
> -	return wmi_driver_register(&alienware_wmax_wmi_driver);
> -}
> -
> -void __exit alienware_wmax_wmi_exit(void)
> -{
> -	wmi_driver_unregister(&alienware_wmax_wmi_driver);
> -}
> -
>   static int __init alienware_wmi_init(void)
>   {
>   	int ret;
> diff --git a/drivers/platform/x86/dell/alienware-wmi-legacy.c b/drivers/platform/x86/dell/alienware-wmi-legacy.c
> new file mode 100644
> index 000000000000..45ff6b6518e5
> --- /dev/null
> +++ b/drivers/platform/x86/dell/alienware-wmi-legacy.c
> @@ -0,0 +1,98 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Alienware LEGACY WMI device driver
> + *
> + * Copyright (C) 2025 Kurt Borja <kuurtb@gmail.com>
> + */
> +
> +#include <linux/wmi.h>
> +#include "alienware-wmi.h"
> +
> +struct legacy_led_args {
> +	struct color_platform colors;
> +	u8 brightness;
> +	u8 state;
> +} __packed;
> +
> +
> +/*
> + * Legacy WMI driver
> + */
> +static int legacy_wmi_update_led(struct alienfx_priv *priv,
> +				 struct wmi_device *wdev, u8 location)
> +{
> +	struct legacy_led_args legacy_args = {
> +		.colors = priv->colors[location],
> +		.brightness = priv->global_brightness,
> +		.state = 0,
> +	};
> +	struct acpi_buffer input;
> +	acpi_status status;
> +
> +	if (legacy_args.state != LEGACY_RUNNING) {
> +		legacy_args.state = priv->lighting_control_state;
> +
> +		input.length = sizeof(legacy_args);
> +		input.pointer = &legacy_args;
> +
> +		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
> +					     location + 1, &input, NULL);
> +		if (ACPI_FAILURE(status))
> +			return -EIO;
> +
> +		return 0;
> +	}
> +
> +	return alienware_wmi_command(wdev, location + 1, &legacy_args,
> +				     sizeof(legacy_args), NULL);
> +}
> +
> +static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
> +					struct wmi_device *wdev, u8 brightness)
> +{
> +	return legacy_wmi_update_led(priv, wdev, 0);
> +}
> +
> +static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
> +{
> +	struct alienfx_platdata pdata = {
> +		.wdev = wdev,
> +		.ops = {
> +			.upd_led = legacy_wmi_update_led,
> +			.upd_brightness = legacy_wmi_update_brightness,
> +		},
> +	};
> +
> +	return alienware_alienfx_setup(&pdata);
> +}
> +
> +static void legacy_wmi_remove(struct wmi_device *wdev)
> +{
> +	alienware_alienfx_exit(wdev);
> +}
> +
> +static struct wmi_device_id alienware_legacy_device_id_table[] = {
> +	{ LEGACY_CONTROL_GUID, NULL },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
> +
> +static struct wmi_driver alienware_legacy_wmi_driver = {
> +	.driver = {
> +		.name = "alienware-wmi-alienfx",
> +		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> +	},
> +	.id_table = alienware_legacy_device_id_table,
> +	.probe = legacy_wmi_probe,
> +	.remove = legacy_wmi_remove,
> +};
> +
> +int __init alienware_legacy_wmi_init(void)
> +{
> +	return wmi_driver_register(&alienware_legacy_wmi_driver);
> +}
> +
> +void __exit alienware_legacy_wmi_exit(void)
> +{
> +	wmi_driver_unregister(&alienware_legacy_wmi_driver);
> +}
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> new file mode 100644
> index 000000000000..9b65e401b454
> --- /dev/null
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -0,0 +1,767 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Alienware WMAX WMI device driver
> + *
> + * Copyright (C) 2014 Dell Inc <Dell.Client.Kernel@dell.com>
> + * Copyright (C) 2025 Kurt Borja <kuurtb@gmail.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/dmi.h>
> +#include <linux/moduleparam.h>
> +#include <linux/platform_profile.h>
> +#include <linux/wmi.h>
> +#include "alienware-wmi.h"
> +
> +#define WMAX_METHOD_HDMI_SOURCE			0x1
> +#define WMAX_METHOD_HDMI_STATUS			0x2
> +#define WMAX_METHOD_HDMI_CABLE			0x5
> +#define WMAX_METHOD_AMPLIFIER_CABLE		0x6
> +#define WMAX_METHOD_DEEP_SLEEP_CONTROL		0x0B
> +#define WMAX_METHOD_DEEP_SLEEP_STATUS		0x0C
> +#define WMAX_METHOD_BRIGHTNESS			0x3
> +#define WMAX_METHOD_ZONE_CONTROL		0x4
> +#define WMAX_METHOD_THERMAL_INFORMATION		0x14
> +#define WMAX_METHOD_THERMAL_CONTROL		0x15
> +#define WMAX_METHOD_GAME_SHIFT_STATUS		0x25
> +
> +#define WMAX_THERMAL_MODE_GMODE			0xAB
> +
> +#define WMAX_FAILURE_CODE			0xFFFFFFFF
> +#define WMAX_THERMAL_TABLE_MASK			GENMASK(7, 4)
> +#define WMAX_THERMAL_MODE_MASK			GENMASK(3, 0)
> +#define WMAX_SENSOR_ID_MASK			BIT(8)
> +
> +static bool force_platform_profile;
> +module_param_unsafe(force_platform_profile, bool, 0);
> +MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
> +
> +static bool force_gmode;
> +module_param_unsafe(force_gmode, bool, 0);
> +MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected");
> +
> +struct awcc_quirks {
> +	bool gmode;
> +};
> +
> +static struct awcc_quirks g_series_quirks = {
> +	.gmode = true,
> +};
> +
> +static struct awcc_quirks generic_quirks = {
> +	.gmode = false,
> +};
> +
> +static const struct dmi_system_id awcc_dmi_table[] __initconst = {
> +	{
> +		.ident = "Alienware m17 R5",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
> +		},
> +		.driver_data = &generic_quirks,
> +	},
> +	{
> +		.ident = "Alienware m18 R2",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
> +		},
> +		.driver_data = &generic_quirks,
> +	},
> +	{
> +		.ident = "Alienware x15 R1",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
> +		},
> +		.driver_data = &generic_quirks,
> +	},
> +	{
> +		.ident = "Alienware x17 R2",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
> +		},
> +		.driver_data = &generic_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G15 5510",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G15 5511",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G15 5515",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G3 3500",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G3 3590",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G5 5500",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +};
> +
> +enum WMAX_THERMAL_INFORMATION_OPERATIONS {
> +	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
> +	WMAX_OPERATION_LIST_IDS			= 0x03,
> +	WMAX_OPERATION_CURRENT_PROFILE		= 0x0B,
> +};
> +
> +enum WMAX_THERMAL_CONTROL_OPERATIONS {
> +	WMAX_OPERATION_ACTIVATE_PROFILE		= 0x01,
> +};
> +
> +enum WMAX_GAME_SHIFT_STATUS_OPERATIONS {
> +	WMAX_OPERATION_TOGGLE_GAME_SHIFT	= 0x01,
> +	WMAX_OPERATION_GET_GAME_SHIFT_STATUS	= 0x02,
> +};
> +
> +enum WMAX_THERMAL_TABLES {
> +	WMAX_THERMAL_TABLE_BASIC		= 0x90,
> +	WMAX_THERMAL_TABLE_USTT			= 0xA0,
> +};
> +
> +enum wmax_thermal_mode {
> +	THERMAL_MODE_USTT_BALANCED,
> +	THERMAL_MODE_USTT_BALANCED_PERFORMANCE,
> +	THERMAL_MODE_USTT_COOL,
> +	THERMAL_MODE_USTT_QUIET,
> +	THERMAL_MODE_USTT_PERFORMANCE,
> +	THERMAL_MODE_USTT_LOW_POWER,
> +	THERMAL_MODE_BASIC_QUIET,
> +	THERMAL_MODE_BASIC_BALANCED,
> +	THERMAL_MODE_BASIC_BALANCED_PERFORMANCE,
> +	THERMAL_MODE_BASIC_PERFORMANCE,
> +	THERMAL_MODE_LAST,
> +};
> +
> +struct wmax_led_args {
> +	u32 led_mask;
> +	struct color_platform colors;
> +	u8 state;
> +} __packed;
> +
> +struct wmax_brightness_args {
> +	u32 led_mask;
> +	u32 percentage;
> +};
> +
> +struct wmax_basic_args {
> +	u8 arg;
> +};
> +
> +struct wmax_u32_args {
> +	u8 operation;
> +	u8 arg1;
> +	u8 arg2;
> +	u8 arg3;
> +};
> +
> +struct awcc_priv {
> +	struct wmi_device *wdev;
> +	struct platform_profile_handler pp_handler;
> +	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
> +};
> +
> +static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_MODE_LAST] = {
> +	[THERMAL_MODE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
> +	[THERMAL_MODE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> +	[THERMAL_MODE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
> +	[THERMAL_MODE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
> +	[THERMAL_MODE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
> +	[THERMAL_MODE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
> +	[THERMAL_MODE_BASIC_QUIET]			= PLATFORM_PROFILE_QUIET,
> +	[THERMAL_MODE_BASIC_BALANCED]			= PLATFORM_PROFILE_BALANCED,
> +	[THERMAL_MODE_BASIC_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> +	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
> +};
> +
> +struct awcc_quirks *awcc;
> +
> +/*
> + *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
> + *	It can toggle between standard system GPU output and HDMI input.
> + */
> +static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
> +			  char *buf)
> +{
> +	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> +	struct wmax_basic_args in_args = {
> +		.arg = 0,
> +	};
> +	u32 out_data;
> +	int ret;
> +
> +	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
> +				    &in_args, sizeof(in_args), &out_data);
> +
> +	if (!ret) {
> +		if (out_data == 0)
> +			return sysfs_emit(buf, "[unconnected] connected unknown\n");
> +		else if (out_data == 1)
> +			return sysfs_emit(buf, "unconnected [connected] unknown\n");
> +	}
> +
> +	pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret);
> +	return sysfs_emit(buf, "unconnected connected [unknown]\n");
> +}
> +
> +static ssize_t source_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
> +{
> +	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> +	struct wmax_basic_args in_args = {
> +		.arg = 0,
> +	};
> +	u32 out_data;
> +	int ret;
> +
> +	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
> +				    &in_args, sizeof(in_args), &out_data);
> +
> +	if (!ret) {
> +		if (out_data == 1)
> +			return sysfs_emit(buf, "[input] gpu unknown\n");
> +		else if (out_data == 2)
> +			return sysfs_emit(buf, "input [gpu] unknown\n");
> +	}
> +
> +	pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret);
> +	return sysfs_emit(buf, "input gpu [unknown]\n");
> +}
> +
> +static ssize_t source_store(struct device *dev, struct device_attribute *attr,
> +			    const char *buf, size_t count)
> +{
> +	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> +	struct wmax_basic_args args;
> +	int ret;
> +
> +	if (strcmp(buf, "gpu\n") == 0)
> +		args.arg = 1;
> +	else if (strcmp(buf, "input\n") == 0)
> +		args.arg = 2;
> +	else
> +		args.arg = 3;
> +	pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
> +
> +	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE, &args,
> +				    sizeof(args), NULL);
> +
> +	if (ret < 0)
> +		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret);
> +
> +	return count;
> +}
> +
> +static DEVICE_ATTR_RO(cable);
> +static DEVICE_ATTR_RW(source);
> +
> +static bool hdmi_group_visible(struct kobject *kobj)
> +{
> +	return alienfx->hdmi_mux;
> +}
> +DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
> +
> +static struct attribute *hdmi_attrs[] = {
> +	&dev_attr_cable.attr,
> +	&dev_attr_source.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group hdmi_attribute_group = {
> +	.name = "hdmi",
> +	.is_visible = SYSFS_GROUP_VISIBLE(hdmi),
> +	.attrs = hdmi_attrs,
> +};
> +
> +/*
> + * Alienware GFX amplifier support
> + * - Currently supports reading cable status
> + * - Leaving expansion room to possibly support dock/undock events later
> + */
> +static ssize_t status_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
> +{
> +	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> +	struct wmax_basic_args in_args = {
> +		.arg = 0,
> +	};
> +	u32 out_data;
> +	int ret;
> +
> +	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
> +				    &in_args, sizeof(in_args), &out_data);
> +
> +	if (!ret) {
> +		if (out_data == 0)
> +			return sysfs_emit(buf, "[unconnected] connected unknown\n");
> +		else if (out_data == 1)
> +			return sysfs_emit(buf, "unconnected [connected] unknown\n");
> +	}
> +
> +	pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret);
> +	return sysfs_emit(buf, "unconnected connected [unknown]\n");
> +}
> +
> +static DEVICE_ATTR_RO(status);
> +
> +static bool amplifier_group_visible(struct kobject *kobj)
> +{
> +	return alienfx->amplifier;
> +}
> +DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
> +
> +static struct attribute *amplifier_attrs[] = {
> +	&dev_attr_status.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group amplifier_attribute_group = {
> +	.name = "amplifier",
> +	.is_visible = SYSFS_GROUP_VISIBLE(amplifier),
> +	.attrs = amplifier_attrs,
> +};
> +
> +/*
> + * Deep Sleep Control support
> + * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
> + */
> +static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
> +			      char *buf)
> +{
> +	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> +	struct wmax_basic_args in_args = {
> +		.arg = 0,
> +	};
> +	u32 out_data;
> +	int ret;
> +
> +	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
> +				    &in_args, sizeof(in_args), &out_data);
> +
> +	if (!ret) {
> +		if (out_data == 0)
> +			return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
> +		else if (out_data == 1)
> +			return sysfs_emit(buf, "disabled [s5] s5_s4\n");
> +		else if (out_data == 2)
> +			return sysfs_emit(buf, "disabled s5 [s5_s4]\n");
> +	}
> +
> +	pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret);
> +	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
> +}
> +
> +static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
> +			       const char *buf, size_t count)
> +{
> +	struct alienfx_platdata *pdata = dev_get_platdata(dev);
> +	struct wmax_basic_args args;
> +	int ret;
> +
> +	if (strcmp(buf, "disabled\n") == 0)
> +		args.arg = 0;
> +	else if (strcmp(buf, "s5\n") == 0)
> +		args.arg = 1;
> +	else
> +		args.arg = 2;
> +	pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
> +
> +	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
> +				    &args, sizeof(args), NULL);
> +
> +	if (!ret)
> +		pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret);
> +
> +	return count;
> +}
> +
> +static DEVICE_ATTR_RW(deepsleep);
> +
> +static bool deepsleep_group_visible(struct kobject *kobj)
> +{
> +	return alienfx->deepslp;
> +}
> +DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
> +
> +static struct attribute *deepsleep_attrs[] = {
> +	&dev_attr_deepsleep.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group deepsleep_attribute_group = {
> +	.name = "deepsleep",
> +	.is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
> +	.attrs = deepsleep_attrs,
> +};
> +
> +static const struct attribute_group *wmax_alienfx_groups[] = {
> +	&hdmi_attribute_group,
> +	&amplifier_attribute_group,
> +	&deepsleep_attribute_group,
> +	NULL
> +};
> +
> +/*
> + * Thermal Profile control
> + *  - Provides thermal profile control through the Platform Profile API
> + */
> +static bool is_wmax_thermal_code(u32 code)
> +{
> +	if (code & WMAX_SENSOR_ID_MASK)
> +		return false;
> +
> +	if ((code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_LAST)
> +		return false;
> +
> +	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_BASIC &&
> +	    (code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_BASIC_QUIET)
> +		return true;
> +
> +	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_USTT &&
> +	    (code & WMAX_THERMAL_MODE_MASK) <= THERMAL_MODE_USTT_LOW_POWER)
> +		return true;
> +
> +	return false;
> +}
> +
> +static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
> +				    u8 arg, u32 *out_data)
> +{
> +	struct wmax_u32_args in_args = {
> +		.operation = operation,
> +		.arg1 = arg,
> +		.arg2 = 0,
> +		.arg3 = 0,
> +	};
> +	int ret;
> +
> +	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
> +				    &in_args, sizeof(in_args), out_data);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (*out_data == WMAX_FAILURE_CODE)
> +		return -EBADRQC;
> +
> +	return 0;
> +}
> +
> +static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
> +{
> +	struct wmax_u32_args in_args = {
> +		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
> +		.arg1 = profile,
> +		.arg2 = 0,
> +		.arg3 = 0,
> +	};
> +	u32 out_data;
> +	int ret;
> +
> +	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
> +				    &in_args, sizeof(in_args), &out_data);
> +	if (ret)
> +		return ret;
> +
> +	if (out_data == WMAX_FAILURE_CODE)
> +		return -EBADRQC;
> +
> +	return 0;
> +}
> +
> +static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
> +				  u32 *out_data)
> +{
> +	struct wmax_u32_args in_args = {
> +		.operation = operation,
> +		.arg1 = 0,
> +		.arg2 = 0,
> +		.arg3 = 0,
> +	};
> +	int ret;
> +
> +	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
> +				    &in_args, sizeof(in_args), out_data);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	if (*out_data == WMAX_FAILURE_CODE)
> +		return -EOPNOTSUPP;
> +
> +	return 0;
> +}
> +
> +static int thermal_profile_get(struct platform_profile_handler *pprof,
> +			       enum platform_profile_option *profile)
> +{
> +	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
> +	u32 out_data;
> +	int ret;
> +
> +	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
> +				       0, &out_data);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	if (out_data == WMAX_THERMAL_MODE_GMODE) {
> +		*profile = PLATFORM_PROFILE_PERFORMANCE;
> +		return 0;
> +	}
> +
> +	if (!is_wmax_thermal_code(out_data))
> +		return -ENODATA;
> +
> +	out_data &= WMAX_THERMAL_MODE_MASK;
> +	*profile = wmax_mode_to_platform_profile[out_data];
> +
> +	return 0;
> +}
> +
> +static int thermal_profile_set(struct platform_profile_handler *pprof,
> +			       enum platform_profile_option profile)
> +{
> +	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
> +
> +	if (awcc->gmode) {
> +		u32 gmode_status;
> +		int ret;
> +
> +		ret = wmax_game_shift_status(priv->wdev,
> +					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
> +					     &gmode_status);
> +
> +		if (ret < 0)
> +			return ret;
> +
> +		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
> +		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
> +			ret = wmax_game_shift_status(priv->wdev,
> +						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
> +						     &gmode_status);
> +
> +			if (ret < 0)
> +				return ret;
> +		}
> +	}
> +
> +	return wmax_thermal_control(priv->wdev,
> +				    priv->supported_thermal_profiles[profile]);
> +}
> +
> +static int create_thermal_profile(struct wmi_device *wdev)
> +{
> +	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
> +	enum platform_profile_option profile;
> +	enum wmax_thermal_mode mode;
> +	u8 sys_desc[4];
> +	u32 first_mode;
> +	u32 out_data;
> +	int ret;
> +
> +	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
> +				       0, (u32 *) &sys_desc);
> +	if (ret < 0)
> +		return ret;
> +
> +	first_mode = sys_desc[0] + sys_desc[1];
> +
> +	for (u32 i = 0; i < sys_desc[3]; i++) {
> +		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
> +					       i + first_mode, &out_data);
> +
> +		if (ret == -EIO)
> +			return ret;
> +
> +		if (ret == -EBADRQC)
> +			break;
> +
> +		if (!is_wmax_thermal_code(out_data))
> +			continue;
> +
> +		mode = out_data & WMAX_THERMAL_MODE_MASK;
> +		profile = wmax_mode_to_platform_profile[mode];
> +		priv->supported_thermal_profiles[profile] = out_data;
> +
> +		set_bit(profile, priv->pp_handler.choices);
> +	}
> +
> +	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
> +		return -ENODEV;
> +
> +	if (awcc->gmode) {
> +		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
> +			WMAX_THERMAL_MODE_GMODE;
> +
> +		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
> +	}
> +
> +	priv->pp_handler.profile_get = thermal_profile_get;
> +	priv->pp_handler.profile_set = thermal_profile_set;
> +	priv->pp_handler.name = "alienware-wmi";
> +	priv->pp_handler.dev = &wdev->dev;
> +
> +	return devm_platform_profile_register(&priv->pp_handler);
> +}
> +
> +static int alienware_awcc_setup(struct wmi_device *wdev)
> +{
> +	struct awcc_priv *priv;
> +
> +	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(&wdev->dev, priv);
> +	priv->wdev = wdev;
> +
> +	return create_thermal_profile(wdev);
> +}
> +
> +/*
> + * WMAX WMI driver
> + */
> +static int wmax_wmi_update_led(struct alienfx_priv *priv,
> +			       struct wmi_device *wdev, u8 location)
> +{
> +	struct wmax_led_args in_args = {
> +		.led_mask = 1 << location,
> +		.colors = priv->colors[location],
> +		.state = priv->lighting_control_state,
> +	};
> +
> +	return alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL, &in_args,
> +				     sizeof(in_args), NULL);
> +}
> +
> +static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
> +				      struct wmi_device *wdev, u8 brightness)
> +{
> +	struct wmax_brightness_args in_args = {
> +		.led_mask = 0xFF,
> +		.percentage = brightness,
> +	};
> +
> +	return alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
> +				     sizeof(in_args), NULL);
> +}
> +
> +static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
> +{
> +	struct alienfx_platdata pdata = {
> +		.wdev = wdev,
> +		.ops = {
> +			.upd_led = wmax_wmi_update_led,
> +			.upd_brightness = wmax_wmi_update_brightness,
> +		},
> +	};
> +	struct platform_device *pdev;
> +	int ret = 0;
> +
> +	if (awcc) {
> +		return alienware_awcc_setup(wdev);
> +	} else {
> +		ret = alienware_alienfx_setup(&pdata);
> +		if (ret < 0)
> +			return ret;
> +
> +		pdev = dev_get_drvdata(&wdev->dev);
> +
> +		ret = device_add_groups(&pdev->dev, wmax_alienfx_groups);
> +		if (ret < 0)
> +			alienware_alienfx_exit(wdev);
> +
> +		return ret;
> +	}
> +}
> +
> +static void wmax_wmi_remove(struct wmi_device *wdev)
> +{
> +	struct platform_device *pdev;
> +
> +	if (!awcc) {
> +		pdev = dev_get_drvdata(&wdev->dev);
> +
> +		device_remove_groups(&pdev->dev, wmax_alienfx_groups);
> +		alienware_alienfx_exit(wdev);
> +	}
> +}
> +
> +static struct wmi_device_id alienware_wmax_device_id_table[] = {
> +	{ WMAX_CONTROL_GUID, NULL },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
> +
> +static struct wmi_driver alienware_wmax_wmi_driver = {
> +	.driver = {
> +		.name = "alienware-wmi-wmax",
> +		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> +	},
> +	.id_table = alienware_wmax_device_id_table,
> +	.probe = wmax_wmi_probe,
> +	.remove = wmax_wmi_remove,
> +};
> +
> +int __init alienware_wmax_wmi_init(void)
> +{
> +	const struct dmi_system_id *id;
> +
> +	id = dmi_first_match(awcc_dmi_table);
> +	if (id)
> +		awcc = id->driver_data;
> +
> +	if (force_platform_profile)
> +		awcc = &generic_quirks;
> +
> +	if (force_gmode) {
> +		if (awcc)
> +			awcc->gmode = true;
> +		else
> +			pr_warn("force_gmode requires platform profile support\n");
> +	}
> +
> +	return wmi_driver_register(&alienware_wmax_wmi_driver);
> +}
> +
> +void __exit alienware_wmax_wmi_exit(void)
> +{
> +	wmi_driver_unregister(&alienware_wmax_wmi_driver);
> +}
> diff --git a/drivers/platform/x86/dell/alienware-wmi.h b/drivers/platform/x86/dell/alienware-wmi.h
> index 427203821967..e4b75b1acd10 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.h
> +++ b/drivers/platform/x86/dell/alienware-wmi.h
> @@ -48,7 +48,6 @@ struct color_platform {
>   
>   struct alienfx_priv {
>   	struct platform_device *pdev;
> -	struct alienfx_quirks *quirks;
>   	struct led_classdev global_led;
>   	struct color_platform colors[4];
>   	u8 global_brightness;

Re: [PATCH v3 20/20] platform/x86: alienware-wmi: Update header and module information

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Update module header and description. Additionally add myself as a module
> author.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/alienware-wmi-base.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi-base.c b/drivers/platform/x86/dell/alienware-wmi-base.c
> index 78101952094c..c98c65341233 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-base.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-base.c
> @@ -1,8 +1,9 @@
>   // SPDX-License-Identifier: GPL-2.0-or-later
>   /*
> - * Alienware AlienFX control
> + * Alienware special feature control
>    *
>    * Copyright (C) 2014 Dell Inc <Dell.Client.Kernel@dell.com>
> + * Copyright (C) 2025 Kurt Borja <kuurtb@gmail.com>
>    */
>   
>   #include <linux/acpi.h>
> @@ -13,6 +14,7 @@
>   #include "alienware-wmi.h"
>   
>   MODULE_AUTHOR("Mario Limonciello <mario.limonciello@outlook.com>");
> +MODULE_AUTHOR("Kurt Borja <kuurtb@gmail.com>");
>   MODULE_DESCRIPTION("Alienware special feature control");
>   MODULE_LICENSE("GPL");
>   

Re: [PATCH v3 15/20] platform/x86: Rename alienware-wmi.c

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Rename alienware-wmi to support upcoming split.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/Makefile                               | 1 +
>   .../platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c}  | 0
>   2 files changed, 1 insertion(+)
>   rename drivers/platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c} (100%)
> 
> diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
> index bb3cbd470a46..f8aec8502c2f 100644
> --- a/drivers/platform/x86/dell/Makefile
> +++ b/drivers/platform/x86/dell/Makefile
> @@ -5,6 +5,7 @@
>   #
>   
>   obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
> +alienware-wmi-objs			:= alienware-wmi-base.o
>   obj-$(CONFIG_DCDBAS)			+= dcdbas.o
>   obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
>   obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
> diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi-base.c
> similarity index 100%
> rename from drivers/platform/x86/dell/alienware-wmi.c
> rename to drivers/platform/x86/dell/alienware-wmi-base.c

Re: [PATCH v3 03/20] platform/x86: alienware-wmi: Modify parse_rgb() signature

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> parse_rgb() now takes struct color_platform instead of struct
> platform_zone to support upcoming refactor.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/alienware-wmi.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
> index ec64a8f22301..e54e3cc45691 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.c
> +++ b/drivers/platform/x86/dell/alienware-wmi.c
> @@ -434,7 +434,7 @@ static u8 global_brightness;
>   /*
>    * Helpers used for zone control
>    */
> -static int parse_rgb(const char *buf, struct platform_zone *zone)
> +static int parse_rgb(const char *buf, struct color_platform *colors)
>   {
>   	long unsigned int rgb;
>   	int ret;
> @@ -454,7 +454,7 @@ static int parse_rgb(const char *buf, struct platform_zone *zone)
>   	repackager.package = rgb & 0x0f0f0f0f;
>   	pr_debug("alienware-wmi: r: %d g:%d b: %d\n",
>   		 repackager.cp.red, repackager.cp.green, repackager.cp.blue);
> -	zone->colors = repackager.cp;
> +	*colors = repackager.cp;
>   	return 0;
>   }
>   
> @@ -538,7 +538,7 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
>   		pr_err("alienware-wmi: invalid target zone\n");
>   		return 1;
>   	}
> -	ret = parse_rgb(buf, target_zone);
> +	ret = parse_rgb(buf, &target_zone->colors);
>   	if (ret)
>   		return ret;
>   	ret = alienware_update_led(target_zone);

Re: [PATCH v3 14/20] MAINTAINERS: Update ALIENWARE WMI DRIVER entry

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Dell has been inactive in its maintainership role of this driver since
> around 2021. Due to this, add myself as a maintainer and update path
> to support upcoming changes.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   MAINTAINERS | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3809931b9240..596c6a46478c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -784,10 +784,12 @@ F:	Documentation/admin-guide/perf/alibaba_pmu.rst
>   F:	drivers/perf/alibaba_uncore_drw_pmu.c
>   
>   ALIENWARE WMI DRIVER
> +M:	Kurt Borja <kuurtb@gmail.com>
> +L:	platform-driver-x86@vger.kernel.org
>   L:	Dell.Client.Kernel@dell.com
>   S:	Maintained
>   F:	Documentation/wmi/devices/alienware-wmi.rst
> -F:	drivers/platform/x86/dell/alienware-wmi.c
> +F:	drivers/platform/x86/dell/alienware-wmi*
>   
>   ALLEGRO DVT VIDEO IP CORE DRIVER
>   M:	Michael Tretter <m.tretter@pengutronix.de>

Re: [PATCH v3 02/20] platform/x86: alienware-wmi: Move Lighting Control State

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Place Lighting Control State logic next to other attributes of the same
> sysfs group.
> 
> While at it, rename:
> 
> store_control_state()	-> lighting_control_state_store()
> show_control_state()	-> lighting_control_state_show()
> 
> Replace DEVICE_ATTR() with DEVICE_ATTR_RW() and do a general style
> cleanup.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/alienware-wmi.c | 74 ++++++++++++-----------
>   1 file changed, 39 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
> index 7212d75396b9..ec64a8f22301 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.c
> +++ b/drivers/platform/x86/dell/alienware-wmi.c
> @@ -545,6 +545,45 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
>   	return ret ? ret : count;
>   }
>   
> +/*
> + * Lighting control state device attribute (Global)
> + */
> +static ssize_t lighting_control_state_show(struct device *dev,
> +					   struct device_attribute *attr,
> +					   char *buf)
> +{
> +	if (lighting_control_state == LEGACY_BOOTING)
> +		return sysfs_emit(buf, "[booting] running suspend\n");
> +	else if (lighting_control_state == LEGACY_SUSPEND)
> +		return sysfs_emit(buf, "booting running [suspend]\n");
> +
> +	return sysfs_emit(buf, "booting [running] suspend\n");
> +}
> +
> +static ssize_t lighting_control_state_store(struct device *dev,
> +					    struct device_attribute *attr,
> +					    const char *buf, size_t count)
> +{
> +	u8 val;
> +
> +	if (strcmp(buf, "booting\n") == 0)
> +		val = LEGACY_BOOTING;
> +	else if (strcmp(buf, "suspend\n") == 0)
> +		val = LEGACY_SUSPEND;
> +	else if (interface == LEGACY)
> +		val = LEGACY_RUNNING;
> +	else
> +		val = WMAX_RUNNING;
> +
> +	lighting_control_state = val;
> +	pr_debug("alienware-wmi: updated control state to %d\n",
> +		 lighting_control_state);
> +
> +	return count;
> +}
> +
> +static DEVICE_ATTR_RW(lighting_control_state);
> +
>   /*
>    * LED Brightness (Global)
>    */
> @@ -589,41 +628,6 @@ static struct led_classdev global_led = {
>   	.name = "alienware::global_brightness",
>   };
>   
> -/*
> - * Lighting control state device attribute (Global)
> - */
> -static ssize_t show_control_state(struct device *dev,
> -				  struct device_attribute *attr, char *buf)
> -{
> -	if (lighting_control_state == LEGACY_BOOTING)
> -		return sysfs_emit(buf, "[booting] running suspend\n");
> -	else if (lighting_control_state == LEGACY_SUSPEND)
> -		return sysfs_emit(buf, "booting running [suspend]\n");
> -	return sysfs_emit(buf, "booting [running] suspend\n");
> -}
> -
> -static ssize_t store_control_state(struct device *dev,
> -				   struct device_attribute *attr,
> -				   const char *buf, size_t count)
> -{
> -	long unsigned int val;
> -	if (strcmp(buf, "booting\n") == 0)
> -		val = LEGACY_BOOTING;
> -	else if (strcmp(buf, "suspend\n") == 0)
> -		val = LEGACY_SUSPEND;
> -	else if (interface == LEGACY)
> -		val = LEGACY_RUNNING;
> -	else
> -		val = WMAX_RUNNING;
> -	lighting_control_state = val;
> -	pr_debug("alienware-wmi: updated control state to %d\n",
> -		 lighting_control_state);
> -	return count;
> -}
> -
> -static DEVICE_ATTR(lighting_control_state, 0644, show_control_state,
> -		   store_control_state);
> -
>   static int alienware_zone_init(struct platform_device *dev)
>   {
>   	u8 zone;

Re: [PATCH v3 13/20] platform/x86: alienware-wmi: Split DMI table

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Split thermal features into a new DMI table to support upcoming file
> split. While at it:
> 
> Rename quirk_entry -> alienfx_features,
> Rename quirks -> alienfx
> 
> and change hdmi_mux, amplifier and deepslp types to bool, because they are
> already being implicitly used as bools.
> 
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/alienware-wmi.c | 337 ++++++++++------------
>   1 file changed, 158 insertions(+), 179 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
> index c75ad7ef3d54..e2fcb95b506c 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.c
> +++ b/drivers/platform/x86/dell/alienware-wmi.c
> @@ -113,102 +113,68 @@ static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_
>   	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
>   };
>   
> -struct quirk_entry {
> +struct alienfx_quirks {
>   	u8 num_zones;
> -	u8 hdmi_mux;
> -	u8 amplifier;
> -	u8 deepslp;
> -	bool thermal;
> -	bool gmode;
> +	bool hdmi_mux;
> +	bool amplifier;
> +	bool deepslp;
>   };
>   
> -static struct quirk_entry *quirks;
> +static struct alienfx_quirks *alienfx;
>   
>   
> -static struct quirk_entry quirk_inspiron5675 = {
> +static struct alienfx_quirks quirk_inspiron5675 = {
>   	.num_zones = 2,
> -	.hdmi_mux = 0,
> -	.amplifier = 0,
> -	.deepslp = 0,
> -	.thermal = false,
> -	.gmode = false,
> +	.hdmi_mux = false,
> +	.amplifier = false,
> +	.deepslp = false,
>   };
>   
> -static struct quirk_entry quirk_unknown = {
> +static struct alienfx_quirks quirk_unknown = {
>   	.num_zones = 2,
> -	.hdmi_mux = 0,
> -	.amplifier = 0,
> -	.deepslp = 0,
> -	.thermal = false,
> -	.gmode = false,
> +	.hdmi_mux = false,
> +	.amplifier = false,
> +	.deepslp = false,
>   };
>   
> -static struct quirk_entry quirk_x51_r1_r2 = {
> +static struct alienfx_quirks quirk_x51_r1_r2 = {
>   	.num_zones = 3,
> -	.hdmi_mux = 0,
> -	.amplifier = 0,
> -	.deepslp = 0,
> -	.thermal = false,
> -	.gmode = false,
> +	.hdmi_mux = false,
> +	.amplifier = false,
> +	.deepslp = false,
>   };
>   
> -static struct quirk_entry quirk_x51_r3 = {
> +static struct alienfx_quirks quirk_x51_r3 = {
>   	.num_zones = 4,
> -	.hdmi_mux = 0,
> -	.amplifier = 1,
> -	.deepslp = 0,
> -	.thermal = false,
> -	.gmode = false,
> +	.hdmi_mux = false,
> +	.amplifier = true,
> +	.deepslp = false,
>   };
>   
> -static struct quirk_entry quirk_asm100 = {
> +static struct alienfx_quirks quirk_asm100 = {
>   	.num_zones = 2,
> -	.hdmi_mux = 1,
> -	.amplifier = 0,
> -	.deepslp = 0,
> -	.thermal = false,
> -	.gmode = false,
> +	.hdmi_mux = true,
> +	.amplifier = false,
> +	.deepslp = false,
>   };
>   
> -static struct quirk_entry quirk_asm200 = {
> +static struct alienfx_quirks quirk_asm200 = {
>   	.num_zones = 2,
> -	.hdmi_mux = 1,
> -	.amplifier = 0,
> -	.deepslp = 1,
> -	.thermal = false,
> -	.gmode = false,
> +	.hdmi_mux = true,
> +	.amplifier = false,
> +	.deepslp = true,
>   };
>   
> -static struct quirk_entry quirk_asm201 = {
> +static struct alienfx_quirks quirk_asm201 = {
>   	.num_zones = 2,
> -	.hdmi_mux = 1,
> -	.amplifier = 1,
> -	.deepslp = 1,
> -	.thermal = false,
> -	.gmode = false,
> -};
> -
> -static struct quirk_entry quirk_g_series = {
> -	.num_zones = 2,
> -	.hdmi_mux = 0,
> -	.amplifier = 0,
> -	.deepslp = 0,
> -	.thermal = true,
> -	.gmode = true,
> -};
> -
> -static struct quirk_entry quirk_x_series = {
> -	.num_zones = 2,
> -	.hdmi_mux = 0,
> -	.amplifier = 0,
> -	.deepslp = 0,
> -	.thermal = true,
> -	.gmode = false,
> +	.hdmi_mux = true,
> +	.amplifier = true,
> +	.deepslp = true,
>   };
>   
>   static int __init dmi_matched(const struct dmi_system_id *dmi)
>   {
> -	quirks = dmi->driver_data;
> +	alienfx = dmi->driver_data;
>   	return 1;
>   }
>   
> @@ -240,42 +206,6 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
>   		},
>   		.driver_data = &quirk_asm201,
>   	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Alienware m17 R5",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
> -		},
> -		.driver_data = &quirk_x_series,
> -	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Alienware m18 R2",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
> -		},
> -		.driver_data = &quirk_x_series,
> -	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Alienware x15 R1",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
> -		},
> -		.driver_data = &quirk_x_series,
> -	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Alienware x17 R2",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
> -		},
> -		.driver_data = &quirk_x_series,
> -	},
>   	{
>   		.callback = dmi_matched,
>   		.ident = "Alienware X51 R1",
> @@ -303,60 +233,6 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
>   		},
>   		.driver_data = &quirk_x51_r3,
>   	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Dell Inc. G15 5510",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
> -		},
> -		.driver_data = &quirk_g_series,
> -	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Dell Inc. G15 5511",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
> -		},
> -		.driver_data = &quirk_g_series,
> -	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Dell Inc. G15 5515",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
> -		},
> -		.driver_data = &quirk_g_series,
> -	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Dell Inc. G3 3500",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
> -		},
> -		.driver_data = &quirk_g_series,
> -	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Dell Inc. G3 3590",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
> -		},
> -		.driver_data = &quirk_g_series,
> -	},
> -	{
> -		.callback = dmi_matched,
> -		.ident = "Dell Inc. G5 5500",
> -		.matches = {
> -			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> -			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
> -		},
> -		.driver_data = &quirk_g_series,
> -	},
>   	{
>   		.callback = dmi_matched,
>   		.ident = "Dell Inc. Inspiron 5675",
> @@ -431,6 +307,103 @@ struct alienfx_platdata {
>   
>   static u8 interface;
>   
> +struct awcc_quirks {
> +	bool gmode;
> +};
> +
> +static struct awcc_quirks g_series_quirks = {
> +	.gmode = true,
> +};
> +
> +static struct awcc_quirks generic_quirks = {
> +	.gmode = false,
> +};
> +
> +static const struct dmi_system_id awcc_dmi_table[] __initconst = {
> +	{
> +		.ident = "Alienware m17 R5",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
> +		},
> +		.driver_data = &generic_quirks,
> +	},
> +	{
> +		.ident = "Alienware m18 R2",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
> +		},
> +		.driver_data = &generic_quirks,
> +	},
> +	{
> +		.ident = "Alienware x15 R1",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
> +		},
> +		.driver_data = &generic_quirks,
> +	},
> +	{
> +		.ident = "Alienware x17 R2",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
> +		},
> +		.driver_data = &generic_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G15 5510",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G15 5511",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G15 5515",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G3 3500",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G3 3590",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +	{
> +		.ident = "Dell Inc. G5 5500",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
> +		},
> +		.driver_data = &g_series_quirks,
> +	},
> +};
> +
> +struct awcc_quirks *awcc;
> +
>   static int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
>   				 void *in_args, size_t in_size, u32 *out_data)
>   {
> @@ -612,7 +585,7 @@ static DEVICE_ATTR_RW(lighting_control_state);
>   static umode_t zone_attr_visible(struct kobject *kobj,
>   				 struct attribute *attr, int n)
>   {
> -	if (n < quirks->num_zones + 1)
> +	if (n < alienfx->num_zones + 1)
>   		return attr->mode;
>   
>   	return 0;
> @@ -620,7 +593,7 @@ static umode_t zone_attr_visible(struct kobject *kobj,
>   
>   static bool zone_group_visible(struct kobject *kobj)
>   {
> -	return quirks->num_zones > 0;
> +	return alienfx->num_zones > 0;
>   }
>   DEFINE_SYSFS_GROUP_VISIBLE(zone);
>   
> @@ -746,7 +719,7 @@ static DEVICE_ATTR_RW(source);
>   
>   static bool hdmi_group_visible(struct kobject *kobj)
>   {
> -	return quirks->hdmi_mux;
> +	return alienfx->hdmi_mux;
>   }
>   DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
>   
> @@ -795,7 +768,7 @@ static DEVICE_ATTR_RO(status);
>   
>   static bool amplifier_group_visible(struct kobject *kobj)
>   {
> -	return quirks->amplifier;
> +	return alienfx->amplifier;
>   }
>   DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
>   
> @@ -868,7 +841,7 @@ static DEVICE_ATTR_RW(deepsleep);
>   
>   static bool deepsleep_group_visible(struct kobject *kobj)
>   {
> -	return quirks->deepslp;
> +	return alienfx->deepslp;
>   }
>   DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
>   
> @@ -1009,7 +982,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
>   {
>   	struct awcc_priv *priv = container_of(pprof, struct awcc_priv, pp_handler);
>   
> -	if (quirks->gmode) {
> +	if (awcc->gmode) {
>   		u32 gmode_status;
>   		int ret;
>   
> @@ -1075,7 +1048,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
>   	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
>   		return -ENODEV;
>   
> -	if (quirks->gmode) {
> +	if (awcc->gmode) {
>   		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
>   			WMAX_THERMAL_MODE_GMODE;
>   
> @@ -1306,7 +1279,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
>   	struct platform_device *pdev;
>   	int ret;
>   
> -	if (quirks->thermal) {
> +	if (awcc) {
>   		return alienware_awcc_setup(wdev);
>   	} else {
>   		ret = alienware_alienfx_setup(&pdata);
> @@ -1327,7 +1300,7 @@ static void wmax_wmi_remove(struct wmi_device *wdev)
>   {
>   	struct platform_device *pdev;
>   
> -	if (!quirks->thermal) {
> +	if (!awcc) {
>   		pdev = dev_get_drvdata(&wdev->dev);
>   
>   		device_remove_groups(&pdev->dev, wmax_alienfx_groups);
> @@ -1353,6 +1326,22 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
>   
>   static int __init alienware_wmax_wmi_init(void)
>   {
> +	const struct dmi_system_id *id;
> +
> +	id = dmi_first_match(awcc_dmi_table);
> +	if (id)
> +		awcc = id->driver_data;
> +
> +	if (force_platform_profile)
> +		awcc = &generic_quirks;
> +
> +	if (force_gmode) {
> +		if (awcc)
> +			awcc->gmode = true;
> +		else
> +			pr_warn("force_gmode requires platform profile support\n");
> +	}
> +
>   	return wmi_driver_register(&alienware_wmax_wmi_driver);
>   }
>   
> @@ -1366,18 +1355,8 @@ static int __init alienware_wmi_init(void)
>   	int ret;
>   
>   	dmi_check_system(alienware_quirks);
> -	if (quirks == NULL)
> -		quirks = &quirk_unknown;
> -
> -	if (force_platform_profile)
> -		quirks->thermal = true;
> -
> -	if (force_gmode) {
> -		if (quirks->thermal)
> -			quirks->gmode = true;
> -		else
> -			pr_warn("force_gmode requires platform profile support\n");
> -	}
> +	if (!alienfx)
> +		alienfx = &quirk_unknown;
>   
>   	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
>   		interface = WMAX;

Re: [PATCH v3 06/20] platform/x86: alienware_wmi: General cleanup of WMAX methods

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Reorder variable declaration from longest to shortest. Standarize
> show/store method names of WMAX's sysfs groups.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/alienware-wmi.c | 67 +++++++++++------------
>   1 file changed, 32 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
> index 418abf46b593..190fee7539bf 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.c
> +++ b/drivers/platform/x86/dell/alienware-wmi.c
> @@ -725,14 +725,14 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
>    *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
>    *	It can toggle between standard system GPU output and HDMI input.
>    */
> -static ssize_t show_hdmi_cable(struct device *dev,
> -			       struct device_attribute *attr, char *buf)
> +static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
> +			  char *buf)
>   {
> -	acpi_status status;
> -	u32 out_data;
>   	struct wmax_basic_args in_args = {
>   		.arg = 0,
>   	};
> +	acpi_status status;
> +	u32 out_data;
>   	status =
>   	    alienware_wmax_command(&in_args, sizeof(in_args),
>   				   WMAX_METHOD_HDMI_CABLE, &out_data);
> @@ -746,14 +746,14 @@ static ssize_t show_hdmi_cable(struct device *dev,
>   	return sysfs_emit(buf, "unconnected connected [unknown]\n");
>   }
>   
> -static ssize_t show_hdmi_source(struct device *dev,
> -				struct device_attribute *attr, char *buf)
> +static ssize_t source_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
>   {
> -	acpi_status status;
> -	u32 out_data;
>   	struct wmax_basic_args in_args = {
>   		.arg = 0,
>   	};
> +	acpi_status status;
> +	u32 out_data;
>   	status =
>   	    alienware_wmax_command(&in_args, sizeof(in_args),
>   				   WMAX_METHOD_HDMI_STATUS, &out_data);
> @@ -768,12 +768,11 @@ static ssize_t show_hdmi_source(struct device *dev,
>   	return sysfs_emit(buf, "input gpu [unknown]\n");
>   }
>   
> -static ssize_t toggle_hdmi_source(struct device *dev,
> -				  struct device_attribute *attr,
> -				  const char *buf, size_t count)
> +static ssize_t source_store(struct device *dev, struct device_attribute *attr,
> +			    const char *buf, size_t count)
>   {
> -	acpi_status status;
>   	struct wmax_basic_args args;
> +	acpi_status status;
>   	if (strcmp(buf, "gpu\n") == 0)
>   		args.arg = 1;
>   	else if (strcmp(buf, "input\n") == 0)
> @@ -791,9 +790,8 @@ static ssize_t toggle_hdmi_source(struct device *dev,
>   	return count;
>   }
>   
> -static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
> -static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
> -		   toggle_hdmi_source);
> +static DEVICE_ATTR_RO(cable);
> +static DEVICE_ATTR_RW(source);
>   
>   static bool hdmi_group_visible(struct kobject *kobj)
>   {
> @@ -818,14 +816,14 @@ static const struct attribute_group hdmi_attribute_group = {
>    * - Currently supports reading cable status
>    * - Leaving expansion room to possibly support dock/undock events later
>    */
> -static ssize_t show_amplifier_status(struct device *dev,
> -				     struct device_attribute *attr, char *buf)
> +static ssize_t status_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
>   {
> -	acpi_status status;
> -	u32 out_data;
>   	struct wmax_basic_args in_args = {
>   		.arg = 0,
>   	};
> +	acpi_status status;
> +	u32 out_data;
>   	status =
>   	    alienware_wmax_command(&in_args, sizeof(in_args),
>   				   WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
> @@ -839,7 +837,7 @@ static ssize_t show_amplifier_status(struct device *dev,
>   	return sysfs_emit(buf, "unconnected connected [unknown]\n");
>   }
>   
> -static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
> +static DEVICE_ATTR_RO(status);
>   
>   static bool amplifier_group_visible(struct kobject *kobj)
>   {
> @@ -862,14 +860,14 @@ static const struct attribute_group amplifier_attribute_group = {
>    * Deep Sleep Control support
>    * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
>    */
> -static ssize_t show_deepsleep_status(struct device *dev,
> -				     struct device_attribute *attr, char *buf)
> +static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
> +			      char *buf)
>   {
> -	acpi_status status;
> -	u32 out_data;
>   	struct wmax_basic_args in_args = {
>   		.arg = 0,
>   	};
> +	acpi_status status;
> +	u32 out_data;
>   	status = alienware_wmax_command(&in_args, sizeof(in_args),
>   					WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
>   	if (ACPI_SUCCESS(status)) {
> @@ -884,12 +882,11 @@ static ssize_t show_deepsleep_status(struct device *dev,
>   	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
>   }
>   
> -static ssize_t toggle_deepsleep(struct device *dev,
> -				struct device_attribute *attr,
> -				const char *buf, size_t count)
> +static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
> +			       const char *buf, size_t count)
>   {
> -	acpi_status status;
>   	struct wmax_basic_args args;
> +	acpi_status status;
>   
>   	if (strcmp(buf, "disabled\n") == 0)
>   		args.arg = 0;
> @@ -908,7 +905,7 @@ static ssize_t toggle_deepsleep(struct device *dev,
>   	return count;
>   }
>   
> -static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
> +static DEVICE_ATTR_RW(deepsleep);
>   
>   static bool deepsleep_group_visible(struct kobject *kobj)
>   {
> @@ -956,13 +953,13 @@ static bool is_wmax_thermal_code(u32 code)
>   
>   static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
>   {
> -	acpi_status status;
>   	struct wmax_u32_args in_args = {
>   		.operation = operation,
>   		.arg1 = arg,
>   		.arg2 = 0,
>   		.arg3 = 0,
>   	};
> +	acpi_status status;
>   
>   	status = alienware_wmax_command(&in_args, sizeof(in_args),
>   					WMAX_METHOD_THERMAL_INFORMATION,
> @@ -979,13 +976,13 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
>   
>   static int wmax_thermal_control(u8 profile)
>   {
> -	acpi_status status;
>   	struct wmax_u32_args in_args = {
>   		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
>   		.arg1 = profile,
>   		.arg2 = 0,
>   		.arg3 = 0,
>   	};
> +	acpi_status status;
>   	u32 out_data;
>   
>   	status = alienware_wmax_command(&in_args, sizeof(in_args),
> @@ -1003,13 +1000,13 @@ static int wmax_thermal_control(u8 profile)
>   
>   static int wmax_game_shift_status(u8 operation, u32 *out_data)
>   {
> -	acpi_status status;
>   	struct wmax_u32_args in_args = {
>   		.operation = operation,
>   		.arg1 = 0,
>   		.arg2 = 0,
>   		.arg3 = 0,
>   	};
> +	acpi_status status;
>   
>   	status = alienware_wmax_command(&in_args, sizeof(in_args),
>   					WMAX_METHOD_GAME_SHIFT_STATUS,
> @@ -1078,11 +1075,11 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
>   
>   static int create_thermal_profile(struct platform_device *platform_device)
>   {
> -	u32 out_data;
> +	enum platform_profile_option profile;
> +	enum wmax_thermal_mode mode;
>   	u8 sys_desc[4];
>   	u32 first_mode;
> -	enum wmax_thermal_mode mode;
> -	enum platform_profile_option profile;
> +	u32 out_data;
>   	int ret;
>   
>   	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,

Re: [PATCH v3 05/20] platform/x86: alienware-wmi: Improve rgb-zones group creation

[Mario Limonciello]

On 1/5/2025 09:30, Kurt Borja wrote:
> Define zone_attrs statically and initialize zone_attribute_group with
> platform driver's .dev_groups.
> 
> Drop match_zone() and instead pass a `location` argument to previous
> show/store methods to access the correct `zone` LED state. On top of
> that rename zone_set() -> zone_store() to be more consistent with sysfs
> conventions.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/dell/alienware-wmi.c | 212 +++++++++++-----------
>   1 file changed, 105 insertions(+), 107 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
> index 16a131cc9f11..418abf46b593 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.c
> +++ b/drivers/platform/x86/dell/alienware-wmi.c
> @@ -376,12 +376,6 @@ struct color_platform {
>   	u8 red;
>   } __packed;
>   
> -struct platform_zone {
> -	u8 location;
> -	struct device_attribute *attr;
> -	struct color_platform colors;
> -};
> -
>   struct wmax_brightness_args {
>   	u32 led_mask;
>   	u32 percentage;
> @@ -411,16 +405,10 @@ struct wmax_u32_args {
>   };
>   
>   static struct platform_device *platform_device;
> -static struct device_attribute *zone_dev_attrs;
> -static struct attribute **zone_attrs;
> -static struct platform_zone *zone_data;
> +static struct color_platform colors[4];
>   static struct platform_profile_handler pp_handler;
>   static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
>   
> -static struct attribute_group zone_attribute_group = {
> -	.name = "rgb_zones",
> -};
> -
>   static u8 interface;
>   static u8 lighting_control_state;
>   static u8 global_brightness;
> @@ -452,24 +440,10 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
>   	return 0;
>   }
>   
> -static struct platform_zone *match_zone(struct device_attribute *attr)
> -{
> -	u8 zone;
> -
> -	for (zone = 0; zone < quirks->num_zones; zone++) {
> -		if ((struct device_attribute *)zone_data[zone].attr == attr) {
> -			pr_debug("alienware-wmi: matched zone location: %d\n",
> -				 zone_data[zone].location);
> -			return &zone_data[zone];
> -		}
> -	}
> -	return NULL;
> -}
> -
>   /*
>    * Individual RGB zone control
>    */
> -static int alienware_update_led(struct platform_zone *zone)
> +static int alienware_update_led(u8 location)
>   {
>   	int method_id;
>   	acpi_status status;
> @@ -478,8 +452,8 @@ static int alienware_update_led(struct platform_zone *zone)
>   	struct legacy_led_args legacy_args;
>   	struct wmax_led_args wmax_basic_args;
>   	if (interface == WMAX) {
> -		wmax_basic_args.led_mask = 1 << zone->location;
> -		wmax_basic_args.colors = zone->colors;
> +		wmax_basic_args.led_mask = 1 << location;
> +		wmax_basic_args.colors = colors[location];
>   		wmax_basic_args.state = lighting_control_state;
>   		guid = WMAX_CONTROL_GUID;
>   		method_id = WMAX_METHOD_ZONE_CONTROL;
> @@ -487,7 +461,7 @@ static int alienware_update_led(struct platform_zone *zone)
>   		input.length = sizeof(wmax_basic_args);
>   		input.pointer = &wmax_basic_args;
>   	} else {
> -		legacy_args.colors = zone->colors;
> +		legacy_args.colors = colors[location];
>   		legacy_args.brightness = global_brightness;
>   		legacy_args.state = 0;
>   		if (lighting_control_state == LEGACY_BOOTING ||
> @@ -496,7 +470,7 @@ static int alienware_update_led(struct platform_zone *zone)
>   			legacy_args.state = lighting_control_state;
>   		} else
>   			guid = LEGACY_CONTROL_GUID;
> -		method_id = zone->location + 1;
> +		method_id = location + 1;
>   
>   		input.length = sizeof(legacy_args);
>   		input.pointer = &legacy_args;
> @@ -510,35 +484,84 @@ static int alienware_update_led(struct platform_zone *zone)
>   }
>   
>   static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
> -			 char *buf)
> +			 char *buf, u8 location)
>   {
> -	struct platform_zone *target_zone;
> -	target_zone = match_zone(attr);
> -	if (target_zone == NULL)
> -		return sprintf(buf, "red: -1, green: -1, blue: -1\n");
>   	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
> -		       target_zone->colors.red,
> -		       target_zone->colors.green, target_zone->colors.blue);
> +		       colors[location].red, colors[location].green,
> +		       colors[location].blue);
>   
>   }
>   
> -static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
> -			const char *buf, size_t count)
> +static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
> +			  const char *buf, size_t count, u8 location)
>   {
> -	struct platform_zone *target_zone;
>   	int ret;
> -	target_zone = match_zone(attr);
> -	if (target_zone == NULL) {
> -		pr_err("alienware-wmi: invalid target zone\n");
> -		return 1;
> -	}
> -	ret = parse_rgb(buf, &target_zone->colors);
> +
> +	ret = parse_rgb(buf, &colors[location]);
>   	if (ret)
>   		return ret;
> -	ret = alienware_update_led(target_zone);
> +
> +	ret = alienware_update_led(location);
> +
>   	return ret ? ret : count;
>   }
>   
> +static ssize_t zone00_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
> +{
> +	return zone_show(dev, attr, buf, 0);
> +}
> +
> +static ssize_t zone00_store(struct device *dev, struct device_attribute *attr,
> +			    const char *buf, size_t count)
> +{
> +	return zone_store(dev, attr, buf, count, 0);
> +}
> +
> +DEVICE_ATTR_RW(zone00);
> +
> +static ssize_t zone01_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
> +{
> +	return zone_show(dev, attr, buf, 1);
> +}
> +
> +static ssize_t zone01_store(struct device *dev, struct device_attribute *attr,
> +			    const char *buf, size_t count)
> +{
> +	return zone_store(dev, attr, buf, count, 1);
> +}
> +
> +DEVICE_ATTR_RW(zone01);
> +
> +static ssize_t zone02_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
> +{
> +	return zone_show(dev, attr, buf, 2);
> +}
> +
> +static ssize_t zone02_store(struct device *dev, struct device_attribute *attr,
> +			    const char *buf, size_t count)
> +{
> +	return zone_store(dev, attr, buf, count, 2);
> +}
> +
> +DEVICE_ATTR_RW(zone02);
> +
> +static ssize_t zone03_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
> +{
> +	return zone_show(dev, attr, buf, 3);
> +}
> +
> +static ssize_t zone03_store(struct device *dev, struct device_attribute *attr,
> +			    const char *buf, size_t count)
> +{
> +	return zone_store(dev, attr, buf, count, 3);
> +}
> +
> +DEVICE_ATTR_RW(zone03);
> +
>   /*
>    * Lighting control state device attribute (Global)
>    */
> @@ -578,6 +601,36 @@ static ssize_t lighting_control_state_store(struct device *dev,
>   
>   static DEVICE_ATTR_RW(lighting_control_state);
>   
> +static umode_t zone_attr_visible(struct kobject *kobj,
> +				 struct attribute *attr, int n)
> +{
> +	if (n < quirks->num_zones + 1)
> +		return attr->mode;
> +
> +	return 0;
> +}
> +
> +static bool zone_group_visible(struct kobject *kobj)
> +{
> +	return quirks->num_zones > 0;
> +}
> +DEFINE_SYSFS_GROUP_VISIBLE(zone);
> +
> +static struct attribute *zone_attrs[] = {
> +	&dev_attr_lighting_control_state.attr,
> +	&dev_attr_zone00.attr,
> +	&dev_attr_zone01.attr,
> +	&dev_attr_zone02.attr,
> +	&dev_attr_zone03.attr,
> +	NULL
> +};
> +
> +static struct attribute_group zone_attribute_group = {
> +	.name = "rgb_zones",
> +	.is_visible = SYSFS_GROUP_VISIBLE(zone),
> +	.attrs = zone_attrs,
> +};
> +
>   /*
>    * LED Brightness (Global)
>    */
> @@ -606,7 +659,7 @@ static void global_led_set(struct led_classdev *led_cdev,
>   	if (interface == WMAX)
>   		ret = wmax_brightness(brightness);
>   	else
> -		ret = alienware_update_led(&zone_data[0]);
> +		ret = alienware_update_led(0);
>   	if (ret)
>   		pr_err("LED brightness update failed\n");
>   }
> @@ -624,9 +677,6 @@ static struct led_classdev global_led = {
>   
>   static int alienware_zone_init(struct platform_device *dev)
>   {
> -	u8 zone;
> -	char *name;
> -
>   	if (interface == WMAX) {
>   		lighting_control_state = WMAX_RUNNING;
>   	} else if (interface == LEGACY) {
> @@ -635,65 +685,12 @@ static int alienware_zone_init(struct platform_device *dev)
>   	global_led.max_brightness = 0x0F;
>   	global_brightness = global_led.max_brightness;
>   
> -	/*
> -	 *      - zone_dev_attrs num_zones + 1 is for individual zones and then
> -	 *        null terminated
> -	 *      - zone_attrs num_zones + 2 is for all attrs in zone_dev_attrs +
> -	 *        the lighting control + null terminated
> -	 *      - zone_data num_zones is for the distinct zones
> -	 */
> -	zone_dev_attrs =
> -	    kcalloc(quirks->num_zones + 1, sizeof(struct device_attribute),
> -		    GFP_KERNEL);
> -	if (!zone_dev_attrs)
> -		return -ENOMEM;
> -
> -	zone_attrs =
> -	    kcalloc(quirks->num_zones + 2, sizeof(struct attribute *),
> -		    GFP_KERNEL);
> -	if (!zone_attrs)
> -		return -ENOMEM;
> -
> -	zone_data =
> -	    kcalloc(quirks->num_zones, sizeof(struct platform_zone),
> -		    GFP_KERNEL);
> -	if (!zone_data)
> -		return -ENOMEM;
> -
> -	for (zone = 0; zone < quirks->num_zones; zone++) {
> -		name = kasprintf(GFP_KERNEL, "zone%02hhX", zone);
> -		if (name == NULL)
> -			return 1;
> -		sysfs_attr_init(&zone_dev_attrs[zone].attr);
> -		zone_dev_attrs[zone].attr.name = name;
> -		zone_dev_attrs[zone].attr.mode = 0644;
> -		zone_dev_attrs[zone].show = zone_show;
> -		zone_dev_attrs[zone].store = zone_set;
> -		zone_data[zone].location = zone;
> -		zone_attrs[zone] = &zone_dev_attrs[zone].attr;
> -		zone_data[zone].attr = &zone_dev_attrs[zone];
> -	}
> -	zone_attrs[quirks->num_zones] = &dev_attr_lighting_control_state.attr;
> -	zone_attribute_group.attrs = zone_attrs;
> -
> -	led_classdev_register(&dev->dev, &global_led);
> -
> -	return sysfs_create_group(&dev->dev.kobj, &zone_attribute_group);
> +	return led_classdev_register(&dev->dev, &global_led);
>   }
>   
>   static void alienware_zone_exit(struct platform_device *dev)
>   {
> -	u8 zone;
> -
> -	sysfs_remove_group(&dev->dev.kobj, &zone_attribute_group);
>   	led_classdev_unregister(&global_led);
> -	if (zone_dev_attrs) {
> -		for (zone = 0; zone < quirks->num_zones; zone++)
> -			kfree(zone_dev_attrs[zone].attr.name);
> -	}
> -	kfree(zone_dev_attrs);
> -	kfree(zone_data);
> -	kfree(zone_attrs);
>   }
>   
>   static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
> @@ -1137,6 +1134,7 @@ static int create_thermal_profile(struct platform_device *platform_device)
>    * Platform Driver
>    */
>   static const struct attribute_group *alienfx_groups[] = {
> +	&zone_attribute_group,
>   	&hdmi_attribute_group,
>   	&amplifier_attribute_group,
>   	&deepsleep_attribute_group,

Re: [PATCH v3 20/20] platform/x86: alienware-wmi: Update header and module information

[Kurt Borja]

On Tue, Jan 07, 2025 at 03:30:06PM -0600, Mario Limonciello wrote:
> On 1/5/2025 09:30, Kurt Borja wrote:
> > Update module header and description. Additionally add myself as a module
> > author.
> > 
> > Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> > Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>

Thank you very much for reviewing these series :)

~ Kurt

> > ---
> >   drivers/platform/x86/dell/alienware-wmi-base.c | 4 +++-
> >   1 file changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/platform/x86/dell/alienware-wmi-base.c b/drivers/platform/x86/dell/alienware-wmi-base.c
> > index 78101952094c..c98c65341233 100644
> > --- a/drivers/platform/x86/dell/alienware-wmi-base.c
> > +++ b/drivers/platform/x86/dell/alienware-wmi-base.c
> > @@ -1,8 +1,9 @@
> >   // SPDX-License-Identifier: GPL-2.0-or-later
> >   /*
> > - * Alienware AlienFX control
> > + * Alienware special feature control
> >    *
> >    * Copyright (C) 2014 Dell Inc <Dell.Client.Kernel@dell.com>
> > + * Copyright (C) 2025 Kurt Borja <kuurtb@gmail.com>
> >    */
> >   #include <linux/acpi.h>
> > @@ -13,6 +14,7 @@
> >   #include "alienware-wmi.h"
> >   MODULE_AUTHOR("Mario Limonciello <mario.limonciello@outlook.com>");
> > +MODULE_AUTHOR("Kurt Borja <kuurtb@gmail.com>");
> >   MODULE_DESCRIPTION("Alienware special feature control");
> >   MODULE_LICENSE("GPL");
> 

Re: [PATCH v3 06/20] platform/x86: alienware_wmi: General cleanup of WMAX methods

[Ilpo Järvinen]

On Sun, 5 Jan 2025, Kurt Borja wrote:

> Reorder variable declaration from longest to shortest. Standarize
> show/store method names of WMAX's sysfs groups.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> ---
>  drivers/platform/x86/dell/alienware-wmi.c | 67 +++++++++++------------
>  1 file changed, 32 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
> index 418abf46b593..190fee7539bf 100644
> --- a/drivers/platform/x86/dell/alienware-wmi.c
> +++ b/drivers/platform/x86/dell/alienware-wmi.c
> @@ -725,14 +725,14 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
>   *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
>   *	It can toggle between standard system GPU output and HDMI input.
>   */
> -static ssize_t show_hdmi_cable(struct device *dev,
> -			       struct device_attribute *attr, char *buf)
> +static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
> +			  char *buf)
>  {
> -	acpi_status status;
> -	u32 out_data;
>  	struct wmax_basic_args in_args = {
>  		.arg = 0,
>  	};
> +	acpi_status status;
> +	u32 out_data;

Hi Kurt,

I took patches 1-6 into review-ilpo-next as they seemed very obvious and 
had multiple rev-bys by now.

Please note that I edited this patch to add the new lines after function 
variable declarations in a few functions where they were missing.

--
 i.

>  	status =
>  	    alienware_wmax_command(&in_args, sizeof(in_args),
>  				   WMAX_METHOD_HDMI_CABLE, &out_data);
> @@ -746,14 +746,14 @@ static ssize_t show_hdmi_cable(struct device *dev,
>  	return sysfs_emit(buf, "unconnected connected [unknown]\n");
>  }
>  
> -static ssize_t show_hdmi_source(struct device *dev,
> -				struct device_attribute *attr, char *buf)
> +static ssize_t source_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
>  {
> -	acpi_status status;
> -	u32 out_data;
>  	struct wmax_basic_args in_args = {
>  		.arg = 0,
>  	};
> +	acpi_status status;
> +	u32 out_data;
>  	status =
>  	    alienware_wmax_command(&in_args, sizeof(in_args),
>  				   WMAX_METHOD_HDMI_STATUS, &out_data);
> @@ -768,12 +768,11 @@ static ssize_t show_hdmi_source(struct device *dev,
>  	return sysfs_emit(buf, "input gpu [unknown]\n");
>  }
>  
> -static ssize_t toggle_hdmi_source(struct device *dev,
> -				  struct device_attribute *attr,
> -				  const char *buf, size_t count)
> +static ssize_t source_store(struct device *dev, struct device_attribute *attr,
> +			    const char *buf, size_t count)
>  {
> -	acpi_status status;
>  	struct wmax_basic_args args;
> +	acpi_status status;
>  	if (strcmp(buf, "gpu\n") == 0)
>  		args.arg = 1;
>  	else if (strcmp(buf, "input\n") == 0)
> @@ -791,9 +790,8 @@ static ssize_t toggle_hdmi_source(struct device *dev,
>  	return count;
>  }
>  
> -static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
> -static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
> -		   toggle_hdmi_source);
> +static DEVICE_ATTR_RO(cable);
> +static DEVICE_ATTR_RW(source);
>  
>  static bool hdmi_group_visible(struct kobject *kobj)
>  {
> @@ -818,14 +816,14 @@ static const struct attribute_group hdmi_attribute_group = {
>   * - Currently supports reading cable status
>   * - Leaving expansion room to possibly support dock/undock events later
>   */
> -static ssize_t show_amplifier_status(struct device *dev,
> -				     struct device_attribute *attr, char *buf)
> +static ssize_t status_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
>  {
> -	acpi_status status;
> -	u32 out_data;
>  	struct wmax_basic_args in_args = {
>  		.arg = 0,
>  	};
> +	acpi_status status;
> +	u32 out_data;
>  	status =
>  	    alienware_wmax_command(&in_args, sizeof(in_args),
>  				   WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
> @@ -839,7 +837,7 @@ static ssize_t show_amplifier_status(struct device *dev,
>  	return sysfs_emit(buf, "unconnected connected [unknown]\n");
>  }
>  
> -static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
> +static DEVICE_ATTR_RO(status);
>  
>  static bool amplifier_group_visible(struct kobject *kobj)
>  {
> @@ -862,14 +860,14 @@ static const struct attribute_group amplifier_attribute_group = {
>   * Deep Sleep Control support
>   * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
>   */
> -static ssize_t show_deepsleep_status(struct device *dev,
> -				     struct device_attribute *attr, char *buf)
> +static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
> +			      char *buf)
>  {
> -	acpi_status status;
> -	u32 out_data;
>  	struct wmax_basic_args in_args = {
>  		.arg = 0,
>  	};
> +	acpi_status status;
> +	u32 out_data;
>  	status = alienware_wmax_command(&in_args, sizeof(in_args),
>  					WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
>  	if (ACPI_SUCCESS(status)) {
> @@ -884,12 +882,11 @@ static ssize_t show_deepsleep_status(struct device *dev,
>  	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
>  }
>  
> -static ssize_t toggle_deepsleep(struct device *dev,
> -				struct device_attribute *attr,
> -				const char *buf, size_t count)
> +static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
> +			       const char *buf, size_t count)
>  {
> -	acpi_status status;
>  	struct wmax_basic_args args;
> +	acpi_status status;
>  
>  	if (strcmp(buf, "disabled\n") == 0)
>  		args.arg = 0;
> @@ -908,7 +905,7 @@ static ssize_t toggle_deepsleep(struct device *dev,
>  	return count;
>  }
>  
> -static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
> +static DEVICE_ATTR_RW(deepsleep);
>  
>  static bool deepsleep_group_visible(struct kobject *kobj)
>  {
> @@ -956,13 +953,13 @@ static bool is_wmax_thermal_code(u32 code)
>  
>  static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
>  {
> -	acpi_status status;
>  	struct wmax_u32_args in_args = {
>  		.operation = operation,
>  		.arg1 = arg,
>  		.arg2 = 0,
>  		.arg3 = 0,
>  	};
> +	acpi_status status;
>  
>  	status = alienware_wmax_command(&in_args, sizeof(in_args),
>  					WMAX_METHOD_THERMAL_INFORMATION,
> @@ -979,13 +976,13 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
>  
>  static int wmax_thermal_control(u8 profile)
>  {
> -	acpi_status status;
>  	struct wmax_u32_args in_args = {
>  		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
>  		.arg1 = profile,
>  		.arg2 = 0,
>  		.arg3 = 0,
>  	};
> +	acpi_status status;
>  	u32 out_data;
>  
>  	status = alienware_wmax_command(&in_args, sizeof(in_args),
> @@ -1003,13 +1000,13 @@ static int wmax_thermal_control(u8 profile)
>  
>  static int wmax_game_shift_status(u8 operation, u32 *out_data)
>  {
> -	acpi_status status;
>  	struct wmax_u32_args in_args = {
>  		.operation = operation,
>  		.arg1 = 0,
>  		.arg2 = 0,
>  		.arg3 = 0,
>  	};
> +	acpi_status status;
>  
>  	status = alienware_wmax_command(&in_args, sizeof(in_args),
>  					WMAX_METHOD_GAME_SHIFT_STATUS,
> @@ -1078,11 +1075,11 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
>  
>  static int create_thermal_profile(struct platform_device *platform_device)
>  {
> -	u32 out_data;
> +	enum platform_profile_option profile;
> +	enum wmax_thermal_mode mode;
>  	u8 sys_desc[4];
>  	u32 first_mode;
> -	enum wmax_thermal_mode mode;
> -	enum platform_profile_option profile;
> +	u32 out_data;
>  	int ret;
>  
>  	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
> 

-- 
 i.

Re: [PATCH v3 06/20] platform/x86: alienware_wmi: General cleanup of WMAX methods

[Kurt Borja]

On Wed, Jan 08, 2025 at 02:10:56PM +0200, Ilpo Järvinen wrote:
> On Sun, 5 Jan 2025, Kurt Borja wrote:
> 
> > Reorder variable declaration from longest to shortest. Standarize
> > show/store method names of WMAX's sysfs groups.
> > 
> > Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> > Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> > ---
> >  drivers/platform/x86/dell/alienware-wmi.c | 67 +++++++++++------------
> >  1 file changed, 32 insertions(+), 35 deletions(-)
> > 
> > diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
> > index 418abf46b593..190fee7539bf 100644
> > --- a/drivers/platform/x86/dell/alienware-wmi.c
> > +++ b/drivers/platform/x86/dell/alienware-wmi.c
> > @@ -725,14 +725,14 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
> >   *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
> >   *	It can toggle between standard system GPU output and HDMI input.
> >   */
> > -static ssize_t show_hdmi_cable(struct device *dev,
> > -			       struct device_attribute *attr, char *buf)
> > +static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
> > +			  char *buf)
> >  {
> > -	acpi_status status;
> > -	u32 out_data;
> >  	struct wmax_basic_args in_args = {
> >  		.arg = 0,
> >  	};
> > +	acpi_status status;
> > +	u32 out_data;
> 
> Hi Kurt,
> 
> I took patches 1-6 into review-ilpo-next as they seemed very obvious and 
> had multiple rev-bys by now.

Hi Ilpo,

Thank you very much!

> 
> Please note that I edited this patch to add the new lines after function 
> variable declarations in a few functions where they were missing.

I'll check it out, thanks.

~ Kurt

> 
> --
>  i.
> 
> >  	status =
> >  	    alienware_wmax_command(&in_args, sizeof(in_args),
> >  				   WMAX_METHOD_HDMI_CABLE, &out_data);
> > @@ -746,14 +746,14 @@ static ssize_t show_hdmi_cable(struct device *dev,
> >  	return sysfs_emit(buf, "unconnected connected [unknown]\n");
> >  }
> >  
> > -static ssize_t show_hdmi_source(struct device *dev,
> > -				struct device_attribute *attr, char *buf)
> > +static ssize_t source_show(struct device *dev, struct device_attribute *attr,
> > +			   char *buf)
> >  {
> > -	acpi_status status;
> > -	u32 out_data;
> >  	struct wmax_basic_args in_args = {
> >  		.arg = 0,
> >  	};
> > +	acpi_status status;
> > +	u32 out_data;
> >  	status =
> >  	    alienware_wmax_command(&in_args, sizeof(in_args),
> >  				   WMAX_METHOD_HDMI_STATUS, &out_data);
> > @@ -768,12 +768,11 @@ static ssize_t show_hdmi_source(struct device *dev,
> >  	return sysfs_emit(buf, "input gpu [unknown]\n");
> >  }
> >  
> > -static ssize_t toggle_hdmi_source(struct device *dev,
> > -				  struct device_attribute *attr,
> > -				  const char *buf, size_t count)
> > +static ssize_t source_store(struct device *dev, struct device_attribute *attr,
> > +			    const char *buf, size_t count)
> >  {
> > -	acpi_status status;
> >  	struct wmax_basic_args args;
> > +	acpi_status status;
> >  	if (strcmp(buf, "gpu\n") == 0)
> >  		args.arg = 1;
> >  	else if (strcmp(buf, "input\n") == 0)
> > @@ -791,9 +790,8 @@ static ssize_t toggle_hdmi_source(struct device *dev,
> >  	return count;
> >  }
> >  
> > -static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
> > -static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
> > -		   toggle_hdmi_source);
> > +static DEVICE_ATTR_RO(cable);
> > +static DEVICE_ATTR_RW(source);
> >  
> >  static bool hdmi_group_visible(struct kobject *kobj)
> >  {
> > @@ -818,14 +816,14 @@ static const struct attribute_group hdmi_attribute_group = {
> >   * - Currently supports reading cable status
> >   * - Leaving expansion room to possibly support dock/undock events later
> >   */
> > -static ssize_t show_amplifier_status(struct device *dev,
> > -				     struct device_attribute *attr, char *buf)
> > +static ssize_t status_show(struct device *dev, struct device_attribute *attr,
> > +			   char *buf)
> >  {
> > -	acpi_status status;
> > -	u32 out_data;
> >  	struct wmax_basic_args in_args = {
> >  		.arg = 0,
> >  	};
> > +	acpi_status status;
> > +	u32 out_data;
> >  	status =
> >  	    alienware_wmax_command(&in_args, sizeof(in_args),
> >  				   WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
> > @@ -839,7 +837,7 @@ static ssize_t show_amplifier_status(struct device *dev,
> >  	return sysfs_emit(buf, "unconnected connected [unknown]\n");
> >  }
> >  
> > -static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
> > +static DEVICE_ATTR_RO(status);
> >  
> >  static bool amplifier_group_visible(struct kobject *kobj)
> >  {
> > @@ -862,14 +860,14 @@ static const struct attribute_group amplifier_attribute_group = {
> >   * Deep Sleep Control support
> >   * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
> >   */
> > -static ssize_t show_deepsleep_status(struct device *dev,
> > -				     struct device_attribute *attr, char *buf)
> > +static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
> > +			      char *buf)
> >  {
> > -	acpi_status status;
> > -	u32 out_data;
> >  	struct wmax_basic_args in_args = {
> >  		.arg = 0,
> >  	};
> > +	acpi_status status;
> > +	u32 out_data;
> >  	status = alienware_wmax_command(&in_args, sizeof(in_args),
> >  					WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
> >  	if (ACPI_SUCCESS(status)) {
> > @@ -884,12 +882,11 @@ static ssize_t show_deepsleep_status(struct device *dev,
> >  	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
> >  }
> >  
> > -static ssize_t toggle_deepsleep(struct device *dev,
> > -				struct device_attribute *attr,
> > -				const char *buf, size_t count)
> > +static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
> > +			       const char *buf, size_t count)
> >  {
> > -	acpi_status status;
> >  	struct wmax_basic_args args;
> > +	acpi_status status;
> >  
> >  	if (strcmp(buf, "disabled\n") == 0)
> >  		args.arg = 0;
> > @@ -908,7 +905,7 @@ static ssize_t toggle_deepsleep(struct device *dev,
> >  	return count;
> >  }
> >  
> > -static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
> > +static DEVICE_ATTR_RW(deepsleep);
> >  
> >  static bool deepsleep_group_visible(struct kobject *kobj)
> >  {
> > @@ -956,13 +953,13 @@ static bool is_wmax_thermal_code(u32 code)
> >  
> >  static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
> >  {
> > -	acpi_status status;
> >  	struct wmax_u32_args in_args = {
> >  		.operation = operation,
> >  		.arg1 = arg,
> >  		.arg2 = 0,
> >  		.arg3 = 0,
> >  	};
> > +	acpi_status status;
> >  
> >  	status = alienware_wmax_command(&in_args, sizeof(in_args),
> >  					WMAX_METHOD_THERMAL_INFORMATION,
> > @@ -979,13 +976,13 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
> >  
> >  static int wmax_thermal_control(u8 profile)
> >  {
> > -	acpi_status status;
> >  	struct wmax_u32_args in_args = {
> >  		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
> >  		.arg1 = profile,
> >  		.arg2 = 0,
> >  		.arg3 = 0,
> >  	};
> > +	acpi_status status;
> >  	u32 out_data;
> >  
> >  	status = alienware_wmax_command(&in_args, sizeof(in_args),
> > @@ -1003,13 +1000,13 @@ static int wmax_thermal_control(u8 profile)
> >  
> >  static int wmax_game_shift_status(u8 operation, u32 *out_data)
> >  {
> > -	acpi_status status;
> >  	struct wmax_u32_args in_args = {
> >  		.operation = operation,
> >  		.arg1 = 0,
> >  		.arg2 = 0,
> >  		.arg3 = 0,
> >  	};
> > +	acpi_status status;
> >  
> >  	status = alienware_wmax_command(&in_args, sizeof(in_args),
> >  					WMAX_METHOD_GAME_SHIFT_STATUS,
> > @@ -1078,11 +1075,11 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
> >  
> >  static int create_thermal_profile(struct platform_device *platform_device)
> >  {
> > -	u32 out_data;
> > +	enum platform_profile_option profile;
> > +	enum wmax_thermal_mode mode;
> >  	u8 sys_desc[4];
> >  	u32 first_mode;
> > -	enum wmax_thermal_mode mode;
> > -	enum platform_profile_option profile;
> > +	u32 out_data;
> >  	int ret;
> >  
> >  	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
> > 
> 
> -- 
>  i.
> 

Re: [PATCH v3 00/20] platform/x86: alienware-wmi driver rework

[Armin Wolf]

Am 05.01.25 um 16:30 schrieb Kurt Borja:

> Hello :)
>
> I rebased this series on top of review-ilpo-next to pick up
> alienware-wmi's latest commit.

Hi,

sorry for taking a bit long to respond. Could you send a v4 series without
the already applied commits and which cleanly applies onto for-next?

I will then try to review this series till the end of this week.

Thanks,
Armin Wolf

> ~ Kurt
> ---
> v2 -> v3:
>
> [5/20]
>   - Use traditional if statement in zone_attr_visible and return attr->mode
>
> [7/20]
>   - Remove quirks from priv
>
> [8/20]
>   - Call alienware_alienfx_exit if device_add_groups fails
>   - Call device_remove_groups on .remove
>   - Return ret on alienware_wmi_init()
>
> [9/20]
>   - Directly return create_thermal_profile in alienware_awcc_setup()
>   - Assign priv on declaration in alienware_awcc_exit()
>
> [10/20]
>   - Fix alienware_wmi_command()
>
> [13/20]
>   - Rename x_series_features -> generic_quirks
>   - Rename g_series_features -> g_series_quirks
>   - Keep previous module parameter logic
>   - Additionally rename *quirks -> *alienfx
>
> [16/20]
>   - Export *alienfx as an extern variable on alienware-wmi.h
>   - Move pr_fmt to alienware-wmi.h
>
> [17/20]
>   - 2024 -> 2025
>
> [20/20]
>   - 2024 -> 2025
>
> [*/20]
>   - Add platform/x86 prefix to commit messages
>
> v2: https://lore.kernel.org/platform-driver-x86/20241229194506.8268-2-kuurtb@gmail.com/
>
> Kurt Borja (20):
>    platform/x86: alienware-wmi: Remove unnecessary check at module exit
>    platform/x86: alienware-wmi: Move Lighting Control State
>    platform/x86: alienware-wmi: Modify parse_rgb() signature
>    platform/x86: alienware-wmi: Improve hdmi_mux, amplifier and deepslp
>      group creation
>    platform/x86: alienware-wmi: Improve rgb-zones group creation
>    platform/x86: alienware_wmi: General cleanup of WMAX methods
>    platform/x86: alienware-wmi: Add a state container for LED control
>      feature
>    platform/x86: alienware-wmi: Add WMI Drivers
>    platform/x86: alienware-wmi: Add a state container for thermal control
>      methods
>    platform/x86: alienware-wmi: Refactor LED control methods
>    platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods
>    platform/x86: alienware-wmi: Refactor thermal control methods
>    platform/x86: alienware-wmi: Split DMI table
>    MAINTAINERS: Update ALIENWARE WMI DRIVER entry
>    platform/x86: Rename alienware-wmi.c
>    platform/x86: Add alienware-wmi.h
>    platform/x86: Split the alienware-wmi driver
>    platform/x86: dell: Modify Makefile alignment
>    platform/x86: Update alienware-wmi config entries
>    platform/x86: alienware-wmi: Update header and module information
>
>   MAINTAINERS                                   |    4 +-
>   drivers/platform/x86/dell/Kconfig             |   30 +-
>   drivers/platform/x86/dell/Makefile            |   45 +-
>   .../platform/x86/dell/alienware-wmi-base.c    |  488 +++++++
>   .../platform/x86/dell/alienware-wmi-legacy.c  |   98 ++
>   .../platform/x86/dell/alienware-wmi-wmax.c    |  767 ++++++++++
>   drivers/platform/x86/dell/alienware-wmi.c     | 1261 -----------------
>   drivers/platform/x86/dell/alienware-wmi.h     |  104 ++
>   8 files changed, 1509 insertions(+), 1288 deletions(-)
>   create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c
>   create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
>   create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
>   delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c
>   create mode 100644 drivers/platform/x86/dell/alienware-wmi.h
>
>
> base-commit: 6b228cfc52a6e9b7149cf51e247076963d6561cd

Re: [PATCH v3 00/20] platform/x86: alienware-wmi driver rework

[Kurt Borja]

On Thu Jan 16, 2025 at 5:39 PM -05, Armin Wolf wrote:
> Am 05.01.25 um 16:30 schrieb Kurt Borja:
>
> > Hello :)
> >
> > I rebased this series on top of review-ilpo-next to pick up
> > alienware-wmi's latest commit.
>
> Hi,
>
> sorry for taking a bit long to respond. Could you send a v4 series without
> the already applied commits and which cleanly applies onto for-next?

Don't worry!

I also have to rebase it on top of the latest platform profile API
change.

>
> I will then try to review this series till the end of this week.

Thank you very much!

~ Kurt

>
> Thanks,
> Armin Wolf
>
> > ~ Kurt
> > ---
> > v2 -> v3:
> >
> > [5/20]
> >   - Use traditional if statement in zone_attr_visible and return attr->mode
> >
> > [7/20]
> >   - Remove quirks from priv
> >
> > [8/20]
> >   - Call alienware_alienfx_exit if device_add_groups fails
> >   - Call device_remove_groups on .remove
> >   - Return ret on alienware_wmi_init()
> >
> > [9/20]
> >   - Directly return create_thermal_profile in alienware_awcc_setup()
> >   - Assign priv on declaration in alienware_awcc_exit()
> >
> > [10/20]
> >   - Fix alienware_wmi_command()
> >
> > [13/20]
> >   - Rename x_series_features -> generic_quirks
> >   - Rename g_series_features -> g_series_quirks
> >   - Keep previous module parameter logic
> >   - Additionally rename *quirks -> *alienfx
> >
> > [16/20]
> >   - Export *alienfx as an extern variable on alienware-wmi.h
> >   - Move pr_fmt to alienware-wmi.h
> >
> > [17/20]
> >   - 2024 -> 2025
> >
> > [20/20]
> >   - 2024 -> 2025
> >
> > [*/20]
> >   - Add platform/x86 prefix to commit messages
> >
> > v2: https://lore.kernel.org/platform-driver-x86/20241229194506.8268-2-kuurtb@gmail.com/
> >
> > Kurt Borja (20):
> >    platform/x86: alienware-wmi: Remove unnecessary check at module exit
> >    platform/x86: alienware-wmi: Move Lighting Control State
> >    platform/x86: alienware-wmi: Modify parse_rgb() signature
> >    platform/x86: alienware-wmi: Improve hdmi_mux, amplifier and deepslp
> >      group creation
> >    platform/x86: alienware-wmi: Improve rgb-zones group creation
> >    platform/x86: alienware_wmi: General cleanup of WMAX methods
> >    platform/x86: alienware-wmi: Add a state container for LED control
> >      feature
> >    platform/x86: alienware-wmi: Add WMI Drivers
> >    platform/x86: alienware-wmi: Add a state container for thermal control
> >      methods
> >    platform/x86: alienware-wmi: Refactor LED control methods
> >    platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods
> >    platform/x86: alienware-wmi: Refactor thermal control methods
> >    platform/x86: alienware-wmi: Split DMI table
> >    MAINTAINERS: Update ALIENWARE WMI DRIVER entry
> >    platform/x86: Rename alienware-wmi.c
> >    platform/x86: Add alienware-wmi.h
> >    platform/x86: Split the alienware-wmi driver
> >    platform/x86: dell: Modify Makefile alignment
> >    platform/x86: Update alienware-wmi config entries
> >    platform/x86: alienware-wmi: Update header and module information
> >
> >   MAINTAINERS                                   |    4 +-
> >   drivers/platform/x86/dell/Kconfig             |   30 +-
> >   drivers/platform/x86/dell/Makefile            |   45 +-
> >   .../platform/x86/dell/alienware-wmi-base.c    |  488 +++++++
> >   .../platform/x86/dell/alienware-wmi-legacy.c  |   98 ++
> >   .../platform/x86/dell/alienware-wmi-wmax.c    |  767 ++++++++++
> >   drivers/platform/x86/dell/alienware-wmi.c     | 1261 -----------------
> >   drivers/platform/x86/dell/alienware-wmi.h     |  104 ++
> >   8 files changed, 1509 insertions(+), 1288 deletions(-)
> >   create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c
> >   create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
> >   create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
> >   delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c
> >   create mode 100644 drivers/platform/x86/dell/alienware-wmi.h
> >
> >
> > base-commit: 6b228cfc52a6e9b7149cf51e247076963d6561cd