From: alexandre.belloni@bootlin.com
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] rtc: pcf2127: add BSM support
Date: Thu, 9 Jan 2025 14:42:53 +0100 [thread overview]
Message-ID: <20250109134253.827796-1-alexandre.belloni@bootlin.com> (raw)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
The pcf2127 encodes BSM, BLD and power fail detection in the same set of
bits so it is necessary to do some calculation when changing BSM to keep
the rest of the configuration as-is. However, when BSM is disabled, there
is no configuration with BLD enabled so this will be lost when coming back
to a mode with BSM enabled.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-pcf2127.c | 81 +++++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 9c04c4e1a49c..a7f73192d53d 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -48,6 +48,7 @@
#define PCF2127_BIT_CTRL3_BLF BIT(2)
#define PCF2127_BIT_CTRL3_BF BIT(3)
#define PCF2127_BIT_CTRL3_BTSE BIT(4)
+#define PCF2127_CTRL3_PM GENMASK(7, 5)
/* Time and date registers */
#define PCF2127_REG_TIME_BASE 0x03
#define PCF2127_BIT_SC_OSF BIT(7)
@@ -331,6 +332,84 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
return 0;
}
+static int pcf2127_param_get(struct device *dev, struct rtc_param *param)
+{
+ struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+ u32 value;
+ int ret;
+
+ switch (param->param) {
+ case RTC_PARAM_BACKUP_SWITCH_MODE:
+ ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &value);
+ if (ret < 0)
+ return ret;
+
+ value = FIELD_GET(PCF2127_CTRL3_PM, value);
+
+ if (value < 0x3)
+ param->uvalue = RTC_BSM_LEVEL;
+ else if (value < 0x6)
+ param->uvalue = RTC_BSM_DIRECT;
+ else
+ param->uvalue = RTC_BSM_DISABLED;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int pcf2127_param_set(struct device *dev, struct rtc_param *param)
+{
+ struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+ u8 mode = 0;
+ u32 value;
+ int ret;
+
+ switch (param->param) {
+ case RTC_PARAM_BACKUP_SWITCH_MODE:
+ ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &value);
+ if (ret < 0)
+ return ret;
+
+ value = FIELD_GET(PCF2127_CTRL3_PM, value);
+
+ if (value > 5)
+ value -= 5;
+ else if (value > 2)
+ value -= 3;
+
+ switch (param->uvalue) {
+ case RTC_BSM_LEVEL:
+ break;
+ case RTC_BSM_DIRECT:
+ mode = 3;
+ break;
+ case RTC_BSM_DISABLED:
+ if (value == 0)
+ value = 1;
+ mode = 5;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3,
+ PCF2127_CTRL3_PM,
+ FIELD_PREP(PCF2127_CTRL3_PM, mode + value));
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int pcf2127_rtc_ioctl(struct device *dev,
unsigned int cmd, unsigned long arg)
{
@@ -741,6 +820,8 @@ static const struct rtc_class_ops pcf2127_rtc_ops = {
.read_alarm = pcf2127_rtc_read_alarm,
.set_alarm = pcf2127_rtc_set_alarm,
.alarm_irq_enable = pcf2127_rtc_alarm_irq_enable,
+ .param_get = pcf2127_param_get,
+ .param_set = pcf2127_param_set,
};
/* sysfs interface */
--
2.47.1
next reply other threads:[~2025-01-09 13:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-09 13:42 alexandre.belloni [this message]
2025-01-10 20:41 ` [PATCH] rtc: pcf2127: add BSM support kernel test robot
2025-01-10 23:01 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250109134253.827796-1-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox