[PATCH v2 0/5] rtc-rv8803: Implement timestamp trigger over event pins

[Markus Burri <markus.burri@mt.com>]

The RV8901 RTC chip provides a function to store timestamp events.
There are three input pins (EVIN1-3) available for triggering.
The timestamp can be read to detect tamper alerts, for example.

This patch series extends the sysfs interface to enable and read the 
timestamp events.

The data-sheet can be found here:
https://download.epsondevice.com/td/pdf/brief/RX8901CE_en.pdf

This series applies on 'linux-6.13~rc7'

Changes in V2:
* remove separate patch for register definitions
* remove pin configuration over sysfs (use default settings)
* add sysfs documentation
* rework enable to simplify and remove big mutext scope
---
[V1] https://lore.kernel.org/lkml/20250110061401.358371-1-markus.burri@mt.com/

Markus Burri (5):
  dt-bindings: rtc: add new type for epson,rx8901
  rtc-rv8803: add new type for rv8901
  rtc-rv8803: add tamper function to sysfs for rv8901
  rtc-rv8803: extend sysfs to trigger internal ts-event
  rtc-rv8803: extend sysfs to read status

 .../ABI/testing/sysfs-class-rtc-tamper        |  36 ++
 .../devicetree/bindings/rtc/epson,rx8900.yaml |   2 +
 drivers/rtc/rtc-rv8803.c                      | 516 +++++++++++++++++-
 3 files changed, 552 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-class-rtc-tamper


base-commit: 5bc55a333a2f7316b58edc7573e8e893f7acb532
-- 
2.39.5