Re: [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Thu, Jan 16, 2025 at 04:36:07PM +0100, Niklas Cassel wrote:
> On Thu, Jan 16, 2025 at 07:21:02PM +0530, Manivannan Sadhasivam wrote:
> > Hi,
> > 
> > This series carries forward the effort to add Kselftest for PCI Endpoint
> > Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version
> > based on another patch that fixes the return values of IOCTLs in
> > pci_endpoint_test driver and did many cleanups. Since the resulting work
> > modified the initial version substantially, I took over the authorship.
> > 
> > This series also incorporates the review comment by Shuah Khan [2] to move the
> > existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before
> > migrating to Kselftest framework. I made sure that the tests are executable in
> > each commit and updated documentation accordingly.
> > 
> > - Mani
> > 
> > [1] https://lore.kernel.org/linux-pci/20221007053934.5188-1-aman1.gupta@samsung.com
> > [2] https://lore.kernel.org/linux-pci/b2a5db97-dc59-33ab-71cd-f591e0b1b34d@linuxfoundation.org
> > 
> > Changes in v5:
> > 
> > * Incorporated comments from Niklas
> > * Added a patch to fix the DMA MEMCPY check in pci-epf-test driver
> > * Collected tags
> > * Rebased on top of pci/next 0333f56dbbf7ef6bb46d2906766c3e1b2a04a94d
> > 
> > Changes in v4:
> > 
> > * Dropped the BAR fix patches and submitted them separately:
> >   https://lore.kernel.org/linux-pci/20241231130224.38206-1-manivannan.sadhasivam@linaro.org/
> > * Rebased on top of pci/next 9e1b45d7a5bc0ad20f6b5267992da422884b916e
> > 
> > Changes in v3:
> > 
> > * Collected tags.
> > * Added a note about failing testcase 10 and command to skip it in
> >   documentation.
> > * Removed Aman Gupta and Padmanabhan Rajanbabu from CC as their addresses are
> >   bouncing.
> > 
> > Changes in v2:
> > 
> > * Added a patch that fixes return values of IOCTL in pci_endpoint_test driver
> > * Moved the existing tests to new location before migrating
> > * Added a fix for BARs on Qcom devices
> > * Updated documentation and also added fixture variants for memcpy & DMA modes
> > 
> > 
> > Manivannan Sadhasivam (4):
> >   PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test
> >   misc: pci_endpoint_test: Fix the return value of IOCTL
> >   selftests: Move PCI Endpoint tests from tools/pci to Kselftests
> >   selftests: pci_endpoint: Migrate to Kselftest framework
> > 
> >  Documentation/PCI/endpoint/pci-test-howto.rst | 170 +++++------
> >  MAINTAINERS                                   |   2 +-
> >  drivers/misc/pci_endpoint_test.c              | 255 +++++++++--------
> >  drivers/pci/endpoint/functions/pci-epf-test.c |   4 +-
> >  tools/pci/Build                               |   1 -
> >  tools/pci/Makefile                            |  58 ----
> >  tools/pci/pcitest.c                           | 264 ------------------
> >  tools/pci/pcitest.sh                          |  73 -----
> >  tools/testing/selftests/Makefile              |   1 +
> >  .../testing/selftests/pci_endpoint/.gitignore |   2 +
> >  tools/testing/selftests/pci_endpoint/Makefile |   7 +
> >  tools/testing/selftests/pci_endpoint/config   |   4 +
> >  .../pci_endpoint/pci_endpoint_test.c          | 221 +++++++++++++++
> >  13 files changed, 435 insertions(+), 627 deletions(-)
> >  delete mode 100644 tools/pci/Build
> >  delete mode 100644 tools/pci/Makefile
> >  delete mode 100644 tools/pci/pcitest.c
> >  delete mode 100644 tools/pci/pcitest.sh
> >  create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore
> >  create mode 100644 tools/testing/selftests/pci_endpoint/Makefile
> >  create mode 100644 tools/testing/selftests/pci_endpoint/config
> >  create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c
> > 
> > -- 
> > 2.25.1
> > 
> 
> I ran the test using simply:
> 
> $ ./pci_endpoint_test
> 
> and got:
> 
> #  RUN           pci_ep_basic.MSIX_TEST ...
> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110)
> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X33
> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110)
> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X34
> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110)
> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X35
> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110)
> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X36
> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110)
> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X37
> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110)
> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X38
> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110)
> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X39
> 
> 
> I think that you should also do:
> 
> diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst
> index 7d0dbad61456..7d5049c884dd 100644
> --- a/Documentation/PCI/endpoint/pci-test-howto.rst
> +++ b/Documentation/PCI/endpoint/pci-test-howto.rst
> @@ -81,8 +81,8 @@ device, the following commands can be used::
>  
>         # echo 0x104c > functions/pci_epf_test/func1/vendorid
>         # echo 0xb500 > functions/pci_epf_test/func1/deviceid
> -       # echo 16 > functions/pci_epf_test/func1/msi_interrupts
> -       # echo 8 > functions/pci_epf_test/func1/msix_interrupts
> +       # echo 32 > functions/pci_epf_test/func1/msi_interrupts
> +       # echo 2048 > functions/pci_epf_test/func1/msix_interrupts
>  
> 
> Such that the documentation suggests values that will actually make the
> pci_endpoint_test pass without any special parameters set.
> 

Agree and this is what I am doing locally, but that change is not really related
to this series. So I'll submit it separately.

> 
> Other than that small nit, for the series:
> Tested-by: Niklas Cassel <cassel@kernel.org>

Thanks a lot!

- Mani

-- 
மணிவண்ணன் சதாசிவம்