[net PATCH v2] net: airoha: Fix wrong GDM4 register definition

[Christian Marangi <ansuelsmth@gmail.com>]

Fix wrong GDM4 register definition, in Airoha SDK GDM4 is defined at
offset 0x2400 but this doesn't make sense as it does conflict with the
CDM4 that is in the same location.

Following the pattern where each GDM base is at the FWD_CFG, currently
GDM4 base offset is set to 0x2500. This is correct but REG_GDM4_FWD_CFG
and REG_GDM4_SRC_PORT_SET are still using the SDK reference with the
0x2400 offset. Fix these 2 define by subtracting 0x100 to each register
to reflect the real address location.

Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
Changes v2:
- Target correct file (fix wrong downstream branch used)

 drivers/net/ethernet/mediatek/airoha_eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/airoha_eth.c b/drivers/net/ethernet/mediatek/airoha_eth.c
index 415d784de741..09f448f29124 100644
--- a/drivers/net/ethernet/mediatek/airoha_eth.c
+++ b/drivers/net/ethernet/mediatek/airoha_eth.c
@@ -266,11 +266,11 @@
 #define REG_GDM3_FWD_CFG		GDM3_BASE
 #define GDM3_PAD_EN_MASK		BIT(28)
 
-#define REG_GDM4_FWD_CFG		(GDM4_BASE + 0x100)
+#define REG_GDM4_FWD_CFG		GDM4_BASE
 #define GDM4_PAD_EN_MASK		BIT(28)
 #define GDM4_SPORT_OFFSET0_MASK		GENMASK(11, 8)
 
-#define REG_GDM4_SRC_PORT_SET		(GDM4_BASE + 0x33c)
+#define REG_GDM4_SRC_PORT_SET		(GDM4_BASE + 0x23c)
 #define GDM4_SPORT_OFF2_MASK		GENMASK(19, 16)
 #define GDM4_SPORT_OFF1_MASK		GENMASK(15, 12)
 #define GDM4_SPORT_OFF0_MASK		GENMASK(11, 8)
-- 
2.47.1