From: Florian Fainelli <florian.fainelli@broadcom.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <florian.fainelli@broadcom.com>,
Doug Berger <opendmb@gmail.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net] net: bcmgenet: Correct overlaying of PHY and MAC Wake-on-LAN
Date: Wed, 29 Jan 2025 15:13:42 -0800 [thread overview]
Message-ID: <20250129231342.35013-1-florian.fainelli@broadcom.com> (raw)
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
When disabling Wake-on-LAN, make sure that this is done at both the PHY
and MAC level, rather than doing an early return from the PHY driver.
Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN")
Fixes: 9ee09edc05f2 ("net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
.../net/ethernet/broadcom/genet/bcmgenet_wol.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
index 0715ea5bf13e..3b082114f2e5 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -41,9 +41,12 @@ void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct device *kdev = &priv->pdev->dev;
+ u32 phy_wolopts = 0;
- if (dev->phydev)
+ if (dev->phydev) {
phy_ethtool_get_wol(dev->phydev, wol);
+ phy_wolopts = wol->wolopts;
+ }
/* MAC is not wake-up capable, return what the PHY does */
if (!device_can_wakeup(kdev))
@@ -51,9 +54,14 @@ void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
/* Overlay MAC capabilities with that of the PHY queried before */
wol->supported |= WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_FILTER;
- wol->wolopts = priv->wolopts;
- memset(wol->sopass, 0, sizeof(wol->sopass));
+ wol->wolopts |= priv->wolopts;
+ /* Return the PHY configured magic password */
+ if (phy_wolopts & WAKE_MAGICSECURE)
+ return;
+
+ /* Otherwise the MAC one */
+ memset(wol->sopass, 0, sizeof(wol->sopass));
if (wol->wolopts & WAKE_MAGICSECURE)
memcpy(wol->sopass, priv->sopass, sizeof(priv->sopass));
}
@@ -70,7 +78,7 @@ int bcmgenet_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
/* Try Wake-on-LAN from the PHY first */
if (dev->phydev) {
ret = phy_ethtool_set_wol(dev->phydev, wol);
- if (ret != -EOPNOTSUPP)
+ if (ret != -EOPNOTSUPP && wol->wolopts)
return ret;
}
--
2.43.0
next reply other threads:[~2025-01-29 23:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-29 23:13 Florian Fainelli [this message]
2025-02-02 1:00 ` [PATCH net] net: bcmgenet: Correct overlaying of PHY and MAC Wake-on-LAN patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250129231342.35013-1-florian.fainelli@broadcom.com \
--to=florian.fainelli@broadcom.com \
--cc=andrew+netdev@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=opendmb@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox