From: Judith Mendez <jm@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Andrew Davis <afd@ti.com>, Hari Nagalla <hnagalla@ti.com>,
Judith Mendez <jm@ti.com>
Subject: [PATCH v2 5/9] arm64: dts: ti: k3-am62a7-sk: Enable ipc with remote processors
Date: Fri, 31 Jan 2025 15:46:07 -0600 [thread overview]
Message-ID: <20250131214611.3288742-6-jm@ti.com> (raw)
In-Reply-To: <20250131214611.3288742-1-jm@ti.com>
From: Devarsh Thakkar <devarsht@ti.com>
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v1:
- add patches 5-9 to enable ipc and complete device nodes
---
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 78 +++++++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index a6f0d87a50d8a..6f4b037537fec 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -61,11 +61,41 @@ secure_ddr: optee@9e800000 {
no-map;
};
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x100000>;
+ no-map;
+ };
+
wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c900000 0x00 0x01e00000>;
no-map;
};
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0x0f00000>;
+ no-map;
+ };
+
+ c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99800000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: c7x-memory@99900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99900000 0x00 0x01f00000>;
+ no-map;
+ };
};
opp-table {
@@ -737,3 +767,51 @@ dpi1_out: endpoint {
};
};
};
+
+&mailbox0_cluster0 {
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+ status = "okay";
+};
--
2.48.0
next prev parent reply other threads:[~2025-01-31 21:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-31 21:46 [PATCH v2 0/9] Add R5F and C7xv device nodes Judith Mendez
2025-01-31 21:46 ` [PATCH v2 1/9] arm64: dts: ti: k3-am62-wakeup: Add wakeup r5f node Judith Mendez
2025-01-31 23:40 ` Andrew Davis
2025-02-03 22:12 ` Judith Mendez
2025-01-31 21:46 ` [PATCH v2 2/9] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node Judith Mendez
2025-01-31 21:46 ` [PATCH v2 3/9] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node Judith Mendez
2025-01-31 21:46 ` [PATCH v2 4/9] arm64: dts: ti: k3-am62a-main: Add C7xv " Judith Mendez
2025-01-31 21:46 ` Judith Mendez [this message]
2025-02-03 22:53 ` [PATCH v2 5/9] arm64: dts: ti: k3-am62a7-sk: Enable ipc with remote processors Andrew Davis
2025-02-03 23:06 ` Judith Mendez
2025-01-31 21:46 ` [PATCH v2 6/9] arm64: dts: ti: k3-am62p5-sk: " Judith Mendez
2025-01-31 21:46 ` [PATCH v2 7/9] arm64: dts: ti: k3-am62x-sk-common: " Judith Mendez
2025-01-31 21:46 ` [PATCH v2 8/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP Judith Mendez
2025-01-31 21:46 ` [PATCH v2 9/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 " Judith Mendez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250131214611.3288742-6-jm@ti.com \
--to=jm@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hnagalla@ti.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox