From: Artur Weber <aweber.kernel@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Christian Daudt <bcm@fixthebug.org>,
Sherman Yin <syin@broadcom.com>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Stanislav Jakubek <stano.jakubek@gmail.com>,
~postmarketos/upstreaming@lists.sr.ht,
Artur Weber <aweber.kernel@gmail.com>
Subject: [PATCH 3/7] pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned"
Date: Fri, 07 Feb 2025 21:02:42 +0100 [thread overview]
Message-ID: <20250207-bcm21664-pinctrl-v1-3-e7cfac9b2d3b@gmail.com> (raw)
In-Reply-To: <20250207-bcm21664-pinctrl-v1-0-e7cfac9b2d3b@gmail.com>
Replace uses of bare "unsigned" with "unsigned int" to fix checkpatch
warnings. No functional change.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
drivers/pinctrl/bcm/pinctrl-bcm281xx.c | 44 +++++++++++++++++-----------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
index cf6efa9c0364a1ad65885c982e7634f26d19c944..a039b490cdb8e6c41169bfd48abb371447c150a0 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
@@ -72,7 +72,7 @@ static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
struct bcm281xx_pin_function {
const char *name;
const char * const *groups;
- const unsigned ngroups;
+ const unsigned int ngroups;
};
/*
@@ -84,10 +84,10 @@ struct bcm281xx_pinctrl_data {
/* List of all pins */
const struct pinctrl_pin_desc *pins;
- const unsigned npins;
+ const unsigned int npins;
const struct bcm281xx_pin_function *functions;
- const unsigned nfunctions;
+ const unsigned int nfunctions;
struct regmap *regmap;
};
@@ -941,7 +941,7 @@ static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
};
static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
- unsigned pin)
+ unsigned int pin)
{
struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -985,7 +985,7 @@ static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
}
static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
- unsigned group)
+ unsigned int group)
{
struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -993,9 +993,9 @@ static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
}
static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
- unsigned group,
+ unsigned int group,
const unsigned **pins,
- unsigned *num_pins)
+ unsigned int *num_pins)
{
struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -1007,7 +1007,7 @@ static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
- unsigned offset)
+ unsigned int offset)
{
seq_printf(s, " %s", dev_name(pctldev->dev));
}
@@ -1029,7 +1029,7 @@ static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
}
static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
- unsigned function)
+ unsigned int function)
{
struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -1037,9 +1037,9 @@ static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
}
static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
- unsigned function,
+ unsigned int function,
const char * const **groups,
- unsigned * const num_groups)
+ unsigned int * const num_groups)
{
struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -1050,8 +1050,8 @@ static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
}
static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev,
- unsigned function,
- unsigned group)
+ unsigned int function,
+ unsigned int group)
{
struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
const struct bcm281xx_pin_function *f = &pdata->functions[function];
@@ -1082,7 +1082,7 @@ static const struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
};
static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
- unsigned pin,
+ unsigned int pin,
unsigned long *config)
{
return -ENOTSUPP;
@@ -1091,9 +1091,9 @@ static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
/* Goes through the configs and update register val/mask */
static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
+ unsigned int pin,
unsigned long *configs,
- unsigned num_configs,
+ unsigned int num_configs,
u32 *val,
u32 *mask)
{
@@ -1207,9 +1207,9 @@ static const u16 bcm281xx_pullup_map[] = {
/* Goes through the configs and update register val/mask */
static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
+ unsigned int pin,
unsigned long *configs,
- unsigned num_configs,
+ unsigned int num_configs,
u32 *val,
u32 *mask)
{
@@ -1277,9 +1277,9 @@ static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
/* Goes through the configs and update register val/mask */
static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
+ unsigned int pin,
unsigned long *configs,
- unsigned num_configs,
+ unsigned int num_configs,
u32 *val,
u32 *mask)
{
@@ -1321,9 +1321,9 @@ static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
}
static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
- unsigned pin,
+ unsigned int pin,
unsigned long *configs,
- unsigned num_configs)
+ unsigned int num_configs)
{
struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
enum bcm281xx_pin_type pin_type;
--
2.48.1
next prev parent reply other threads:[~2025-02-07 20:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-07 20:02 [PATCH 0/7] pinctrl: bcm281xx: Add support for BCM21664 pinmux Artur Weber
2025-02-07 20:02 ` [PATCH 1/7] dt-bindings: pinctrl: Add bindings for BCM21664 pin controller Artur Weber
2025-02-12 18:17 ` Rob Herring
2025-02-07 20:02 ` [PATCH 2/7] pinctrl: bcm281xx: Fix incorrect regmap max_registers value Artur Weber
2025-02-14 9:03 ` Linus Walleij
2025-02-14 18:32 ` Artur Weber
2025-02-07 20:02 ` Artur Weber [this message]
2025-02-07 20:02 ` [PATCH 4/7] pinctrl: bcm281xx: Provide pinctrl device info as OF platform data Artur Weber
2025-02-09 5:36 ` kernel test robot
2025-02-07 20:02 ` [PATCH 5/7] pinctrl: bcm281xx: Add support for BCM21664 pinmux Artur Weber
2025-02-07 20:02 ` [PATCH 6/7] ARM: dts: bcm2166x-common: Add pinctrl node Artur Weber
2025-02-07 20:02 ` [PATCH 7/7] ARM: dts: bcm2166x: Add bcm2166x-pinctrl DTSI Artur Weber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250207-bcm21664-pinctrl-v1-3-e7cfac9b2d3b@gmail.com \
--to=aweber.kernel@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bcm@fixthebug.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjui@broadcom.com \
--cc=robh@kernel.org \
--cc=sbranden@broadcom.com \
--cc=stano.jakubek@gmail.com \
--cc=syin@broadcom.com \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox