From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shi Fu <shifu0704@thundersoft.com>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
"Martin Povišer" <povik+lin@cutebit.org>,
"Hector Martin" <marcan@marcan.st>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, asahi@lists.linux.dev,
"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH 16/27] ASoC: tas2764: Add SDZ regulator
Date: Sat, 15 Feb 2025 10:02:49 +1000 [thread overview]
Message-ID: <20250215-apple-codec-changes-v1-16-723569b21b19@gmail.com> (raw)
In-Reply-To: <20250215-apple-codec-changes-v1-0-723569b21b19@gmail.com>
From: Hector Martin <marcan@marcan.st>
Multiple amps can be connected to the same SDZ GPIO. Using raw GPIOs for
this breaks, as there is no concept of refcounting/sharing. In order to
model these platforms, introduce support for an SDZ "regulator". This
allows us to represent the SDZ GPIO as a simple regulator-fixed, and
then the regulator core takes care of refcounting so that all codecs are
only powered down once all the driver instances are in the suspend
state.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
sound/soc/codecs/tas2764.c | 39 ++++++++++++++++++++-----
1 file changed, 32 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index 2baa7fbb5fdeaf50cfb76a7eddf752cae2511329..d1eb8ee30415e335adf8e14d14aaa207c949ddcb 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -34,6 +34,7 @@ struct tas2764_priv {
struct snd_soc_component *component;
struct gpio_desc *reset_gpio;
struct gpio_desc *sdz_gpio;
+ struct regulator *sdz_reg;
struct regmap *regmap;
struct device *dev;
int irq;
@@ -153,6 +154,8 @@ static int tas2764_codec_suspend(struct snd_soc_component *component)
if (tas2764->sdz_gpio)
gpiod_set_value_cansleep(tas2764->sdz_gpio, 0);
+ regulator_disable(tas2764->sdz_reg);
+
regcache_cache_only(tas2764->regmap, true);
regcache_mark_dirty(tas2764->regmap);
@@ -164,19 +167,26 @@ static int tas2764_codec_resume(struct snd_soc_component *component)
struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
int ret;
+ ret = regulator_enable(tas2764->sdz_reg);
+
+ if (ret) {
+ dev_err(tas2764->dev, "Failed to enable regulator\n");
+ return ret;
+ }
+
if (tas2764->sdz_gpio) {
gpiod_set_value_cansleep(tas2764->sdz_gpio, 1);
- usleep_range(1000, 2000);
}
- ret = tas2764_update_pwr_ctrl(tas2764);
+ usleep_range(1000, 2000);
+ regcache_cache_only(tas2764->regmap, false);
+
+ ret = regcache_sync(tas2764->regmap);
if (ret < 0)
return ret;
- regcache_cache_only(tas2764->regmap, false);
-
- return regcache_sync(tas2764->regmap);
+ return tas2764_update_pwr_ctrl(tas2764);
}
#else
#define tas2764_codec_suspend NULL
@@ -209,7 +219,7 @@ static const struct snd_soc_dapm_widget tas2764_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_OUTPUT("OUT"),
SND_SOC_DAPM_SIGGEN("VMON"),
- SND_SOC_DAPM_SIGGEN("IMON")
+ SND_SOC_DAPM_SIGGEN("IMON"),
};
static const struct snd_soc_dapm_route tas2764_audio_map[] = {
@@ -642,11 +652,18 @@ static int tas2764_codec_probe(struct snd_soc_component *component)
tas2764->component = component;
+ ret = regulator_enable(tas2764->sdz_reg);
+ if (ret != 0) {
+ dev_err(tas2764->dev, "Failed to enable regulator: %d\n", ret);
+ return ret;
+ }
+
if (tas2764->sdz_gpio) {
gpiod_set_value_cansleep(tas2764->sdz_gpio, 1);
- usleep_range(1000, 2000);
}
+ usleep_range(1000, 2000);
+
tas2764_reset(tas2764);
regmap_reinit_cache(tas2764->regmap, &tas2764_i2c_regmap);
@@ -721,6 +738,9 @@ static int tas2764_codec_probe(struct snd_soc_component *component)
static void tas2764_codec_remove(struct snd_soc_component *component)
{
+ struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
+
+ regulator_disable(tas2764->sdz_reg);
sysfs_remove_groups(&component->dev->kobj, tas2764_sysfs_groups);
}
@@ -823,6 +843,11 @@ static int tas2764_parse_dt(struct device *dev, struct tas2764_priv *tas2764)
{
int ret = 0;
+ tas2764->sdz_reg = devm_regulator_get(dev, "SDZ");
+ if (IS_ERR(tas2764->sdz_reg))
+ return dev_err_probe(dev, PTR_ERR(tas2764->sdz_reg),
+ "Failed to get SDZ supply\n");
+
tas2764->reset_gpio = devm_gpiod_get_optional(tas2764->dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(tas2764->reset_gpio)) {
--
2.48.1
next prev parent reply other threads:[~2025-02-15 0:05 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-15 0:02 [PATCH 00/27] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-15 0:02 ` [PATCH 01/27] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-15 0:02 ` [PATCH 02/27] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-15 0:02 ` [PATCH 03/27] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-16 22:58 ` Alyssa Rosenzweig
2025-02-16 23:54 ` Mark Brown
2025-02-15 0:02 ` [PATCH 04/27] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-15 0:16 ` Martin Povišer
2025-02-15 0:02 ` [PATCH 05/27] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-15 0:02 ` [PATCH 06/27] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic James Calligeros
2025-02-15 0:02 ` [PATCH 07/27] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-02-15 0:02 ` [PATCH 08/27] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-15 0:02 ` [PATCH 09/27] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-16 23:01 ` Alyssa Rosenzweig
2025-02-15 0:02 ` [PATCH 10/27] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-15 0:02 ` [PATCH 11/27] ASoC: tas2770: Export 'die_temp' to sysfs James Calligeros
2025-02-16 23:56 ` Mark Brown
2025-02-15 0:02 ` [PATCH 12/27] ASoC: tas2764: " James Calligeros
2025-02-15 0:02 ` [PATCH 13/27] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-15 0:02 ` [PATCH 14/27] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-15 0:02 ` [PATCH 15/27] ASoC: tas2764: Power up/down amp on mute ops James Calligeros
2025-02-15 0:02 ` James Calligeros [this message]
2025-02-15 0:02 ` [PATCH 17/27] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-15 0:02 ` [PATCH 18/27] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-15 0:02 ` [PATCH 19/27] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-16 23:58 ` Mark Brown
2025-02-15 0:02 ` [PATCH 20/27] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-15 0:02 ` [PATCH 21/27] ASoC: tas2770: Add SDZ regulator James Calligeros
2025-02-15 0:02 ` [PATCH 22/27] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-15 0:02 ` [PATCH 23/27] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-15 0:02 ` [PATCH 24/27] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-15 0:02 ` [PATCH 25/27] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-17 0:00 ` Mark Brown
2025-02-15 0:02 ` [PATCH 26/27] ASoC: tas2764: Set the SDOUT polarity correctly James Calligeros
2025-02-15 0:03 ` [PATCH 27/27] ASoC: tas2770: " James Calligeros
2025-02-15 0:39 ` [PATCH 00/27] ASoC: tas27{64,70}: improve support for Apple codec variants Neal Gompa
2025-02-16 23:03 ` Alyssa Rosenzweig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250215-apple-codec-changes-v1-16-723569b21b19@gmail.com \
--to=jcalligeros99@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=kevin-lu@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=perex@perex.cz \
--cc=povik+lin@cutebit.org \
--cc=robh@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=shifu0704@thundersoft.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox