From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shi Fu <shifu0704@thundersoft.com>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
"Martin Povišer" <povik+lin@cutebit.org>,
"Hector Martin" <marcan@marcan.st>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, asahi@lists.linux.dev,
"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH 21/27] ASoC: tas2770: Add SDZ regulator
Date: Sat, 15 Feb 2025 10:02:54 +1000 [thread overview]
Message-ID: <20250215-apple-codec-changes-v1-21-723569b21b19@gmail.com> (raw)
In-Reply-To: <20250215-apple-codec-changes-v1-0-723569b21b19@gmail.com>
From: Hector Martin <marcan@marcan.st>
Multiple amps can be connected to the same SDZ GPIO. Using raw GPIOs for
this breaks, as there is no concept of refcounting/sharing. In order to
model these platforms, introduce support for an SDZ "regulator". This
allows us to represent the SDZ GPIO as a simple regulator-fixed, and
then the regulator core takes care of refcounting so that all codecs are
only powered down once all the driver instances are in the suspend
state.
This also reworks the sleep/resume logic to copy what tas2764 does,
which makes more sense.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
sound/soc/codecs/tas2770.c | 67 ++++++++++++++++---------
sound/soc/codecs/tas2770.h | 1 +
2 files changed, 45 insertions(+), 23 deletions(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 9f3588ec117bb8ed0a6f2bbe5d7dc422862f052b..bac34e1237ce2a5e25face47e0597617308f1343 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -71,23 +71,21 @@ static int tas2770_codec_suspend(struct snd_soc_component *component)
struct tas2770_priv *tas2770 = snd_soc_component_get_drvdata(component);
int ret = 0;
- regcache_cache_only(tas2770->regmap, true);
- regcache_mark_dirty(tas2770->regmap);
+ ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
+ TAS2770_PWR_CTRL_MASK,
+ TAS2770_PWR_CTRL_SHUTDOWN);
+ if (ret < 0)
+ return ret;
- if (tas2770->sdz_gpio) {
+ if (tas2770->sdz_gpio)
gpiod_set_value_cansleep(tas2770->sdz_gpio, 0);
- } else {
- ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
- TAS2770_PWR_CTRL_MASK,
- TAS2770_PWR_CTRL_SHUTDOWN);
- if (ret < 0) {
- regcache_cache_only(tas2770->regmap, false);
- regcache_sync(tas2770->regmap);
- return ret;
- }
- ret = 0;
- }
+ regulator_disable(tas2770->sdz_reg);
+
+ regcache_cache_only(tas2770->regmap, true);
+ regcache_mark_dirty(tas2770->regmap);
+
+ usleep_range(6000, 7000);
return ret;
}
@@ -97,18 +95,26 @@ static int tas2770_codec_resume(struct snd_soc_component *component)
struct tas2770_priv *tas2770 = snd_soc_component_get_drvdata(component);
int ret;
- if (tas2770->sdz_gpio) {
- gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
- usleep_range(1000, 2000);
- } else {
- ret = tas2770_update_pwr_ctrl(tas2770);
- if (ret < 0)
- return ret;
+ ret = regulator_enable(tas2770->sdz_reg);
+
+ if (ret) {
+ dev_err(tas2770->dev, "Failed to enable regulator\n");
+ return ret;
}
+ if (tas2770->sdz_gpio)
+ gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+
+
+ usleep_range(1000, 2000);
+
regcache_cache_only(tas2770->regmap, false);
- return regcache_sync(tas2770->regmap);
+ ret = regcache_sync(tas2770->regmap);
+ if (ret < 0)
+ return ret;
+
+ return tas2770_update_pwr_ctrl(tas2770);
}
#else
#define tas2770_codec_suspend NULL
@@ -547,11 +553,18 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
tas2770->component = component;
+ ret = regulator_enable(tas2770->sdz_reg);
+ if (ret != 0) {
+ dev_err(tas2770->dev, "Failed to enable regulator: %d\n", ret);
+ return ret;
+ }
+
if (tas2770->sdz_gpio) {
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
- usleep_range(1000, 2000);
}
+ usleep_range(1000, 2000);
+
tas2770_reset(tas2770);
regmap_reinit_cache(tas2770->regmap, &tas2770_i2c_regmap);
@@ -573,7 +586,10 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
static void tas2770_codec_remove(struct snd_soc_component *component)
{
+ struct tas2770_priv *tas2770 = snd_soc_component_get_drvdata(component);
+
sysfs_remove_groups(&component->dev->kobj, tas2770_sysfs_groups);
+ regulator_disable(tas2770->sdz_reg);
}
static DECLARE_TLV_DB_SCALE(tas2770_digital_tlv, 1100, 50, 0);
@@ -713,6 +729,11 @@ static int tas2770_parse_dt(struct device *dev, struct tas2770_priv *tas2770)
tas2770->v_sense_slot = -1;
}
+ tas2770->sdz_reg = devm_regulator_get(dev, "SDZ");
+ if (IS_ERR(tas2770->sdz_reg))
+ return dev_err_probe(dev, PTR_ERR(tas2770->sdz_reg),
+ "Failed to get SDZ supply\n");
+
tas2770->sdz_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
if (IS_ERR(tas2770->sdz_gpio)) {
if (PTR_ERR(tas2770->sdz_gpio) == -EPROBE_DEFER)
diff --git a/sound/soc/codecs/tas2770.h b/sound/soc/codecs/tas2770.h
index f75f40781ab136cccbe1c272f7129ddd3e4a22a3..f75baf23caf3a194a040474a7484a3d44f673435 100644
--- a/sound/soc/codecs/tas2770.h
+++ b/sound/soc/codecs/tas2770.h
@@ -134,6 +134,7 @@ struct tas2770_priv {
struct snd_soc_component *component;
struct gpio_desc *reset_gpio;
struct gpio_desc *sdz_gpio;
+ struct regulator *sdz_reg;
struct regmap *regmap;
struct device *dev;
int v_sense_slot;
--
2.48.1
next prev parent reply other threads:[~2025-02-15 0:05 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-15 0:02 [PATCH 00/27] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-15 0:02 ` [PATCH 01/27] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-15 0:02 ` [PATCH 02/27] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-15 0:02 ` [PATCH 03/27] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-16 22:58 ` Alyssa Rosenzweig
2025-02-16 23:54 ` Mark Brown
2025-02-15 0:02 ` [PATCH 04/27] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-15 0:16 ` Martin Povišer
2025-02-15 0:02 ` [PATCH 05/27] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-15 0:02 ` [PATCH 06/27] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic James Calligeros
2025-02-15 0:02 ` [PATCH 07/27] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-02-15 0:02 ` [PATCH 08/27] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-15 0:02 ` [PATCH 09/27] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-16 23:01 ` Alyssa Rosenzweig
2025-02-15 0:02 ` [PATCH 10/27] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-15 0:02 ` [PATCH 11/27] ASoC: tas2770: Export 'die_temp' to sysfs James Calligeros
2025-02-16 23:56 ` Mark Brown
2025-02-15 0:02 ` [PATCH 12/27] ASoC: tas2764: " James Calligeros
2025-02-15 0:02 ` [PATCH 13/27] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-15 0:02 ` [PATCH 14/27] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-15 0:02 ` [PATCH 15/27] ASoC: tas2764: Power up/down amp on mute ops James Calligeros
2025-02-15 0:02 ` [PATCH 16/27] ASoC: tas2764: Add SDZ regulator James Calligeros
2025-02-15 0:02 ` [PATCH 17/27] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-15 0:02 ` [PATCH 18/27] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-15 0:02 ` [PATCH 19/27] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-16 23:58 ` Mark Brown
2025-02-15 0:02 ` [PATCH 20/27] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-15 0:02 ` James Calligeros [this message]
2025-02-15 0:02 ` [PATCH 22/27] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-15 0:02 ` [PATCH 23/27] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-15 0:02 ` [PATCH 24/27] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-15 0:02 ` [PATCH 25/27] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-17 0:00 ` Mark Brown
2025-02-15 0:02 ` [PATCH 26/27] ASoC: tas2764: Set the SDOUT polarity correctly James Calligeros
2025-02-15 0:03 ` [PATCH 27/27] ASoC: tas2770: " James Calligeros
2025-02-15 0:39 ` [PATCH 00/27] ASoC: tas27{64,70}: improve support for Apple codec variants Neal Gompa
2025-02-16 23:03 ` Alyssa Rosenzweig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250215-apple-codec-changes-v1-21-723569b21b19@gmail.com \
--to=jcalligeros99@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=kevin-lu@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=perex@perex.cz \
--cc=povik+lin@cutebit.org \
--cc=robh@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=shifu0704@thundersoft.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox