public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	 Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	 Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
	 Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shi Fu <shifu0704@thundersoft.com>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
	"Martin Povišer" <povik+lin@cutebit.org>,
	"Hector Martin" <marcan@marcan.st>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, asahi@lists.linux.dev,
	"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH 06/27] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic
Date: Sat, 15 Feb 2025 10:02:39 +1000	[thread overview]
Message-ID: <20250215-apple-codec-changes-v1-6-723569b21b19@gmail.com> (raw)
In-Reply-To: <20250215-apple-codec-changes-v1-0-723569b21b19@gmail.com>

From: Martin Povišer <povik+lin@cutebit.org>

The former code sets the V slot from inside set_bitwidth according to
the bitwidth of the PCM format. That's wrong, since:

 * It overrides the V slot parsed from DT binding.

 * The V slot is set shifted behind the I slot by the length of the PCM
   bitwidth, but the PCM bitwidth has no assured relation to the TDM
   slot width.

Replace the former logic by setting up the I/V sense transmission only
in case of both I/V slots being specified in devicetree, and never
override those values. In case the slots are left unspecified, disable
the transmission completely.

There's an improbable case someone is relying on the old behavior, but
if so, that's a setup that only works by accident, and cannot be sanely
supported going forward. There's no indication anyone is consuming the
I/V sense data up to today, so break the former behavior.

Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
 sound/soc/codecs/tas2770.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 0c8a02ac2c0db10c449a68d9365e79576e24abba..35a4d5a4a3e0cf4f71f81fd59f44f075c59cdbc1 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -224,19 +224,16 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
 		ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG2,
 						    TAS2770_TDM_CFG_REG2_RXW_MASK,
 						    TAS2770_TDM_CFG_REG2_RXW_16BITS);
-		tas2770->v_sense_slot = tas2770->i_sense_slot + 2;
 		break;
 	case SNDRV_PCM_FORMAT_S24_LE:
 		ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG2,
 						    TAS2770_TDM_CFG_REG2_RXW_MASK,
 						    TAS2770_TDM_CFG_REG2_RXW_24BITS);
-		tas2770->v_sense_slot = tas2770->i_sense_slot + 4;
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
 		ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG2,
 						    TAS2770_TDM_CFG_REG2_RXW_MASK,
 						    TAS2770_TDM_CFG_REG2_RXW_32BITS);
-		tas2770->v_sense_slot = tas2770->i_sense_slot + 4;
 		break;
 
 	default:
@@ -246,11 +243,6 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
 	if (ret < 0)
 		return ret;
 
-	ret = tas2770_set_ivsense_transmit(tas2770, tas2770->i_sense_slot,
-					   tas2770->v_sense_slot);
-	if (ret < 0)
-		return ret;
-
 	return 0;
 }
 
@@ -505,6 +497,7 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
 {
 	struct tas2770_priv *tas2770 =
 			snd_soc_component_get_drvdata(component);
+	int ret;
 
 	tas2770->component = component;
 
@@ -516,6 +509,14 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
 	tas2770_reset(tas2770);
 	regmap_reinit_cache(tas2770->regmap, &tas2770_i2c_regmap);
 
+	if (tas2770->i_sense_slot != -1 && tas2770->v_sense_slot != -1) {
+		ret = tas2770_set_ivsense_transmit(tas2770, tas2770->i_sense_slot,
+						   tas2770->v_sense_slot);
+
+		if (ret < 0)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -643,7 +644,7 @@ static int tas2770_parse_dt(struct device *dev, struct tas2770_priv *tas2770)
 		dev_info(tas2770->dev, "Property %s is missing setting default slot\n",
 			 "ti,imon-slot-no");
 
-		tas2770->i_sense_slot = 0;
+		tas2770->i_sense_slot = -1;
 	}
 
 	rc = fwnode_property_read_u32(dev->fwnode, "ti,vmon-slot-no",
@@ -652,7 +653,7 @@ static int tas2770_parse_dt(struct device *dev, struct tas2770_priv *tas2770)
 		dev_info(tas2770->dev, "Property %s is missing setting default slot\n",
 			 "ti,vmon-slot-no");
 
-		tas2770->v_sense_slot = 2;
+		tas2770->v_sense_slot = -1;
 	}
 
 	tas2770->sdz_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);

-- 
2.48.1


  parent reply	other threads:[~2025-02-15  0:03 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-15  0:02 [PATCH 00/27] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-15  0:02 ` [PATCH 01/27] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-15  0:02 ` [PATCH 02/27] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-15  0:02 ` [PATCH 03/27] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-16 22:58   ` Alyssa Rosenzweig
2025-02-16 23:54     ` Mark Brown
2025-02-15  0:02 ` [PATCH 04/27] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-15  0:16   ` Martin Povišer
2025-02-15  0:02 ` [PATCH 05/27] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-15  0:02 ` James Calligeros [this message]
2025-02-15  0:02 ` [PATCH 07/27] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-02-15  0:02 ` [PATCH 08/27] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-15  0:02 ` [PATCH 09/27] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-16 23:01   ` Alyssa Rosenzweig
2025-02-15  0:02 ` [PATCH 10/27] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-15  0:02 ` [PATCH 11/27] ASoC: tas2770: Export 'die_temp' to sysfs James Calligeros
2025-02-16 23:56   ` Mark Brown
2025-02-15  0:02 ` [PATCH 12/27] ASoC: tas2764: " James Calligeros
2025-02-15  0:02 ` [PATCH 13/27] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-15  0:02 ` [PATCH 14/27] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-15  0:02 ` [PATCH 15/27] ASoC: tas2764: Power up/down amp on mute ops James Calligeros
2025-02-15  0:02 ` [PATCH 16/27] ASoC: tas2764: Add SDZ regulator James Calligeros
2025-02-15  0:02 ` [PATCH 17/27] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-15  0:02 ` [PATCH 18/27] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-15  0:02 ` [PATCH 19/27] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-16 23:58   ` Mark Brown
2025-02-15  0:02 ` [PATCH 20/27] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-15  0:02 ` [PATCH 21/27] ASoC: tas2770: Add SDZ regulator James Calligeros
2025-02-15  0:02 ` [PATCH 22/27] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-15  0:02 ` [PATCH 23/27] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-15  0:02 ` [PATCH 24/27] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-15  0:02 ` [PATCH 25/27] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-17  0:00   ` Mark Brown
2025-02-15  0:02 ` [PATCH 26/27] ASoC: tas2764: Set the SDOUT polarity correctly James Calligeros
2025-02-15  0:03 ` [PATCH 27/27] ASoC: tas2770: " James Calligeros
2025-02-15  0:39 ` [PATCH 00/27] ASoC: tas27{64,70}: improve support for Apple codec variants Neal Gompa
2025-02-16 23:03 ` Alyssa Rosenzweig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250215-apple-codec-changes-v1-6-723569b21b19@gmail.com \
    --to=jcalligeros99@gmail.com \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=baojun.xu@ti.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=kevin-lu@ti.com \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=perex@perex.cz \
    --cc=povik+lin@cutebit.org \
    --cc=robh@kernel.org \
    --cc=shenghao-ding@ti.com \
    --cc=shifu0704@thundersoft.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox