From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shi Fu <shifu0704@thundersoft.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
"Martin Povišer" <povik+lin@cutebit.org>,
"Hector Martin" <marcan@marcan.st>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, asahi@lists.linux.dev,
linux-hwmon@vger.kernel.org, "Neal Gompa" <neal@gompa.dev>,
"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH v2 28/29] ASoC: tas2764: Set the SDOUT polarity correctly
Date: Tue, 18 Feb 2025 18:36:02 +1000 [thread overview]
Message-ID: <20250218-apple-codec-changes-v2-28-932760fd7e07@gmail.com> (raw)
In-Reply-To: <20250218-apple-codec-changes-v2-0-932760fd7e07@gmail.com>
From: Hector Martin <marcan@marcan.st>
TX launch polarity needs to be the opposite of RX capture polarity, to
generate the right bit slot alignment.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
sound/soc/codecs/tas2764.c | 10 +++++++++-
sound/soc/codecs/tas2764.h | 6 ++++++
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index 7d6cb29a749e234b325e253985eb0feac6f44934..e559724c84a34c5ee2eb08f60ada4f8acd131226 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -427,7 +427,7 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_component *component = dai->component;
struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
- u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0;
+ u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0, asi_cfg_4 = 0;
int ret;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
@@ -436,12 +436,14 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
fallthrough;
case SND_SOC_DAIFMT_NB_NF:
asi_cfg_1 = TAS2764_TDM_CFG1_RX_RISING;
+ asi_cfg_4 = TAS2764_TDM_CFG4_TX_FALLING;
break;
case SND_SOC_DAIFMT_IB_IF:
asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;
fallthrough;
case SND_SOC_DAIFMT_IB_NF:
asi_cfg_1 = TAS2764_TDM_CFG1_RX_FALLING;
+ asi_cfg_4 = TAS2764_TDM_CFG4_TX_RISING;
break;
}
@@ -451,6 +453,12 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
if (ret < 0)
return ret;
+ ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG4,
+ TAS2764_TDM_CFG4_TX_MASK,
+ asi_cfg_4);
+ if (ret < 0)
+ return ret;
+
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;
diff --git a/sound/soc/codecs/tas2764.h b/sound/soc/codecs/tas2764.h
index 786d81eb5b1e71bad094ef94e4b56e8f7c910285..4a419c11d4b08eebb915762db00af5c06ff3dd42 100644
--- a/sound/soc/codecs/tas2764.h
+++ b/sound/soc/codecs/tas2764.h
@@ -84,6 +84,12 @@
#define TAS2764_TDM_CFG3_RXS_SHIFT 0x4
#define TAS2764_TDM_CFG3_MASK GENMASK(3, 0)
+/* TDM Configuration Reg4 */
+#define TAS2764_TDM_CFG4 TAS2764_REG(0X0, 0x0d)
+#define TAS2764_TDM_CFG4_TX_MASK BIT(0)
+#define TAS2764_TDM_CFG4_TX_RISING 0x0
+#define TAS2764_TDM_CFG4_TX_FALLING BIT(0)
+
/* TDM Configuration Reg5 */
#define TAS2764_TDM_CFG5 TAS2764_REG(0X0, 0x0e)
#define TAS2764_TDM_CFG5_VSNS_MASK BIT(6)
--
2.48.1
next prev parent reply other threads:[~2025-02-18 8:39 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-18 8:35 [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-18 8:35 ` [PATCH v2 01/29] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-18 8:35 ` [PATCH v2 02/29] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-18 15:13 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 03/29] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-21 20:24 ` Rob Herring (Arm)
2025-02-18 8:35 ` [PATCH v2 04/29] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-21 20:24 ` Rob Herring (Arm)
2025-02-18 8:35 ` [PATCH v2 05/29] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-18 15:15 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 06/29] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-18 8:35 ` [PATCH v2 07/29] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-18 8:35 ` [PATCH v2 08/29] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic James Calligeros
2025-02-18 8:35 ` [PATCH v2 09/29] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-02-18 15:18 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 10/29] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-18 15:20 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 11/29] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-18 8:35 ` [PATCH v2 12/29] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-18 15:21 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 13/29] ASoC: tas2770: Export 'die_temp' to sysfs James Calligeros
2025-02-18 15:22 ` Mark Brown
2025-02-18 16:09 ` Alyssa Rosenzweig
2025-02-18 16:09 ` Alyssa Rosenzweig
2025-02-18 8:35 ` [PATCH v2 14/29] ASoC: tas2770: expose die temp to hwmon James Calligeros
2025-02-18 15:20 ` Guenter Roeck
2025-02-21 11:31 ` James Calligeros
2025-02-21 15:03 ` Guenter Roeck
2025-02-22 0:16 ` James Calligeros
2025-02-18 15:24 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 15/29] ASoC: tas2764: Export 'die_temp' to sysfs James Calligeros
2025-02-18 8:35 ` [PATCH v2 16/29] ASoC: tas2764: expose die temp to hwmon James Calligeros
2025-02-18 8:35 ` [PATCH v2 17/29] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-18 15:25 ` Mark Brown
2025-02-18 15:55 ` Martin Povišer
2025-02-18 8:35 ` [PATCH v2 18/29] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-18 15:26 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 19/29] ASoC: tas2764: Power up/down amp on mute ops James Calligeros
2025-02-18 8:35 ` [PATCH v2 20/29] ASoC: tas2764: Add SDZ regulator James Calligeros
2025-02-18 15:33 ` Mark Brown
2025-02-19 4:47 ` James Calligeros
2025-02-20 1:45 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 21/29] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-18 15:35 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 22/29] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-18 8:35 ` [PATCH v2 23/29] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-18 8:35 ` [PATCH v2 24/29] ASoC: tas2770: Add SDZ regulator James Calligeros
2025-02-18 15:36 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 25/29] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-18 8:36 ` [PATCH v2 26/29] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-18 15:37 ` Mark Brown
2025-02-18 8:36 ` [PATCH v2 27/29] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-18 8:36 ` James Calligeros [this message]
2025-02-18 15:38 ` [PATCH v2 28/29] ASoC: tas2764: Set the SDOUT polarity correctly Mark Brown
2025-02-18 8:36 ` [PATCH v2 29/29] ASoC: tas2770: " James Calligeros
2025-02-18 21:30 ` (subset) [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250218-apple-codec-changes-v2-28-932760fd7e07@gmail.com \
--to=jcalligeros99@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=jdelvare@suse.com \
--cc=kevin-lu@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=marcan@marcan.st \
--cc=neal@gompa.dev \
--cc=perex@perex.cz \
--cc=povik+lin@cutebit.org \
--cc=robh@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=shifu0704@thundersoft.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox