public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Lothar Rubusch <l.rubusch@gmail.com>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	eraretuya@gmail.com, l.rubusch@gmail.com
Subject: [PATCH v3 03/15] iio: accel: adxl345: reorganize irq handler
Date: Thu, 20 Feb 2025 10:42:22 +0000	[thread overview]
Message-ID: <20250220104234.40958-4-l.rubusch@gmail.com> (raw)
In-Reply-To: <20250220104234.40958-1-l.rubusch@gmail.com>

Reorganize the IRQ handler. Move the overrun handling to the bottom.
Overrun leads to reset the interrupt register. This also happens at
evaluation of a particular interrupt event. First evaluate an event
if possible, then fall back to overrun handling. Additionally simplify
fetching the interrupt status function.

Both is in preparation to build interrupt handling up for the handling
of different detected events, implemented in follow up patches.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345.h      |  1 -
 drivers/iio/accel/adxl345_core.c | 27 +++++++--------------------
 2 files changed, 7 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
index 517e494ba555..bc6d634bd85c 100644
--- a/drivers/iio/accel/adxl345.h
+++ b/drivers/iio/accel/adxl345.h
@@ -43,7 +43,6 @@
 #define ADXL345_REG_INT_ENABLE		0x2E
 #define ADXL345_REG_INT_MAP		0x2F
 #define ADXL345_REG_INT_SOURCE		0x30
-#define ADXL345_REG_INT_SOURCE_MSK	0xFF
 #define ADXL345_REG_DATA_FORMAT		0x31
 #define ADXL345_REG_XYZ_BASE		0x32
 #define ADXL345_REG_DATA_AXIS(index)				\
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 468d562de227..22c5a9c08459 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -107,8 +107,7 @@ static int adxl345_set_interrupts(struct adxl345_state *st)
 	 * interrupts to the INT1 pin, whereas bits set to 1 send their respective
 	 * interrupts to the INT2 pin. The intio shall convert this accordingly.
 	 */
-	int_map = FIELD_GET(ADXL345_REG_INT_SOURCE_MSK,
-			    st->intio ? st->int_map : ~st->int_map);
+	int_map = st->intio ? st->int_map : ~st->int_map;
 
 	ret = regmap_write(st->regmap, ADXL345_REG_INT_MAP, int_map);
 	if (ret)
@@ -404,18 +403,6 @@ static const struct iio_buffer_setup_ops adxl345_buffer_ops = {
 	.predisable = adxl345_buffer_predisable,
 };
 
-static int adxl345_get_status(struct adxl345_state *st)
-{
-	int ret;
-	unsigned int regval;
-
-	ret = regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, &regval);
-	if (ret < 0)
-		return ret;
-
-	return FIELD_GET(ADXL345_REG_INT_SOURCE_MSK, regval);
-}
-
 static int adxl345_fifo_push(struct iio_dev *indio_dev,
 			     int samples)
 {
@@ -449,14 +436,10 @@ static irqreturn_t adxl345_irq_handler(int irq, void *p)
 	int int_stat;
 	int samples;
 
-	int_stat = adxl345_get_status(st);
-	if (int_stat <= 0)
+	if (regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, &int_stat))
 		return IRQ_NONE;
 
-	if (int_stat & ADXL345_INT_OVERRUN)
-		goto err;
-
-	if (int_stat & ADXL345_INT_WATERMARK) {
+	if (FIELD_GET(ADXL345_INT_WATERMARK, int_stat)) {
 		samples = adxl345_get_samples(st);
 		if (samples < 0)
 			goto err;
@@ -464,6 +447,10 @@ static irqreturn_t adxl345_irq_handler(int irq, void *p)
 		if (adxl345_fifo_push(indio_dev, samples) < 0)
 			goto err;
 	}
+
+	if (FIELD_GET(ADXL345_INT_OVERRUN, int_stat))
+		goto err;
+
 	return IRQ_HANDLED;
 
 err:
-- 
2.39.5


  parent reply	other threads:[~2025-02-20 10:42 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-20 10:42 [PATCH v3 00/15] iio: accel: adxl345: add interrupt based sensor events Lothar Rubusch
2025-02-20 10:42 ` [PATCH v3 01/15] iio: accel: adxl345: reorganize measurement enable Lothar Rubusch
2025-02-20 10:42 ` [PATCH v3 02/15] iio: accel: adxl345: add debug register access Lothar Rubusch
2025-02-20 10:42 ` Lothar Rubusch [this message]
2025-03-02 11:36   ` [PATCH v3 03/15] iio: accel: adxl345: reorganize irq handler Jonathan Cameron
2025-02-20 10:42 ` [PATCH v3 04/15] iio: accel: adxl345: use regmap cache for INT mapping Lothar Rubusch
2025-03-02 11:45   ` Jonathan Cameron
2025-03-02 12:10     ` Jonathan Cameron
2025-03-09 11:33     ` Lothar Rubusch
2025-02-20 10:42 ` [PATCH v3 05/15] iio: accel: adxl345: move INT enable to regmap cache Lothar Rubusch
2025-03-02 11:49   ` Jonathan Cameron
2025-02-20 10:42 ` [PATCH v3 06/15] iio: accel: adxl345: add single tap feature Lothar Rubusch
2025-03-02 12:14   ` Jonathan Cameron
2025-03-13 16:29     ` Lothar Rubusch
2025-03-15 17:42       ` Jonathan Cameron
2025-02-20 10:42 ` [PATCH v3 07/15] iio: accel: adxl345: add double " Lothar Rubusch
2025-02-20 10:42 ` [PATCH v3 08/15] iio: accel: adxl345: add double tap suppress bit Lothar Rubusch
2025-03-02 12:17   ` Jonathan Cameron
2025-02-20 10:42 ` [PATCH v3 09/15] iio: accel: adxl345: add freefall feature Lothar Rubusch
2025-03-04 13:23   ` Jonathan Cameron
2025-03-13 16:34     ` Lothar Rubusch
2025-02-20 10:42 ` [PATCH v3 10/15] iio: accel: adxl345: extend sample frequency adjustments Lothar Rubusch
2025-03-04 13:36   ` Jonathan Cameron
2025-02-20 10:42 ` [PATCH v3 11/15] iio: accel: adxl345: add g-range configuration Lothar Rubusch
2025-03-04 13:40   ` Jonathan Cameron
2025-03-13 16:47     ` Lothar Rubusch
2025-03-15 17:47       ` Jonathan Cameron
2025-02-20 10:42 ` [PATCH v3 12/15] iio: accel: adxl345: add activity event feature Lothar Rubusch
2025-03-04 13:49   ` Jonathan Cameron
2025-03-11 10:55     ` Lothar Rubusch
2025-03-15 18:00       ` Jonathan Cameron
2025-02-20 10:42 ` [PATCH v3 13/15] iio: accel: adxl345: add inactivity feature Lothar Rubusch
2025-03-04 13:54   ` Jonathan Cameron
2025-02-20 10:42 ` [PATCH v3 14/15] iio: accel: adxl345: add coupling detection for activity/inactivity Lothar Rubusch
2025-03-04 13:59   ` Jonathan Cameron
2025-03-13 16:39     ` Lothar Rubusch
2025-02-20 10:42 ` [PATCH v3 15/15] docs: iio: add documentation for adxl345 driver Lothar Rubusch
2025-03-04 14:07   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250220104234.40958-4-l.rubusch@gmail.com \
    --to=l.rubusch@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=eraretuya@gmail.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox