public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-pci@vger.kernel.org,
	"Luis Claudio R. Goncalves" <lgoncalv@redhat.com>,
	Ryo Takakura <ryotkkr98@gmail.com>,
	bhelgaas@google.com, jonathan.derrick@linux.dev, kw@linux.com,
	lpieralisi@kernel.org, manivannan.sadhasivam@linaro.org,
	nirmal.patel@linux.intel.com, robh@kernel.org,
	rostedt@goodmis.org, kbusch@kernel.org,
	linux-kernel@vger.kernel.org, linux-rt-devel@lists.linux.dev
Subject: Re: [PATCH v4] PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t.
Date: Thu, 20 Feb 2025 16:59:48 -0600	[thread overview]
Message-ID: <20250220225948.GA318342@bhelgaas> (raw)
In-Reply-To: <20250218080830.ufw3IgyX@linutronix.de>

On Tue, Feb 18, 2025 at 09:08:30AM +0100, Sebastian Andrzej Siewior wrote:
> From: Ryo Takakura <ryotkkr98@gmail.com>
> 
> The access to the PCI config space via pci_ops::read and pci_ops::write
> is a low-level hardware access. The functions can be accessed with
> disabled interrupts even on PREEMPT_RT. The pci_lock has been made a
> raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on
> PREEMPT_RT can not be acquired with disabled interrupts.

I think this is missing a word or two and should say:

  A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
  acquired with disabled interrupts.

pci_ops.read() is called while holding the non-sleepable
raw_spinlock_t pci_lock, so pci_ops.read() must also be non-sleepable.

It's not really relevant that "pci_ops.read() can be called with
disabled interrupts even on PREEMPT_RT".  It can *always* be called
with interrupts disabled.

> The vmd_dev::cfg_lock is accessed in the same context as the pci_lock.
> 
> Make vmd_dev::cfg_lock a raw_spinlock_t.
> 
> [bigeasy: Reword commit message.]
> 
> Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
> Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
> Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
> Changes since v3 https://lore.kernel.org/all/20241219014549.24427-1-ryotkkr98@gmail.com/
> - Repost with updated changelog.
> 
> Changes since v2 https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/
> - In case if CONFIG_PCI_LOCKLESS_CONFIG is set, vmd_pci_read/write()
>   still neeed cfg_lock for their serialization. So instead of removing
>   it, convert it to raw spinlock.
> 
> v1: https://lore.kernel.org/lkml/20241215141321.383144-1-ryotkkr98@gmail.com/
> 
>  drivers/pci/controller/vmd.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
> index 9d9596947350f..94ceec50a2b94 100644
> --- a/drivers/pci/controller/vmd.c
> +++ b/drivers/pci/controller/vmd.c
> @@ -125,7 +125,7 @@ struct vmd_irq_list {
>  struct vmd_dev {
>  	struct pci_dev		*dev;
>  
> -	spinlock_t		cfg_lock;
> +	raw_spinlock_t		cfg_lock;
>  	void __iomem		*cfgbar;
>  
>  	int msix_count;
> @@ -391,7 +391,7 @@ static int vmd_pci_read(struct pci_bus *bus, unsigned int devfn, int reg,
>  	if (!addr)
>  		return -EFAULT;
>  
> -	spin_lock_irqsave(&vmd->cfg_lock, flags);
> +	raw_spin_lock_irqsave(&vmd->cfg_lock, flags);
>  	switch (len) {
>  	case 1:
>  		*value = readb(addr);
> @@ -406,7 +406,7 @@ static int vmd_pci_read(struct pci_bus *bus, unsigned int devfn, int reg,
>  		ret = -EINVAL;
>  		break;
>  	}
> -	spin_unlock_irqrestore(&vmd->cfg_lock, flags);
> +	raw_spin_unlock_irqrestore(&vmd->cfg_lock, flags);
>  	return ret;
>  }
>  
> @@ -426,7 +426,7 @@ static int vmd_pci_write(struct pci_bus *bus, unsigned int devfn, int reg,
>  	if (!addr)
>  		return -EFAULT;
>  
> -	spin_lock_irqsave(&vmd->cfg_lock, flags);
> +	raw_spin_lock_irqsave(&vmd->cfg_lock, flags);
>  	switch (len) {
>  	case 1:
>  		writeb(value, addr);
> @@ -444,7 +444,7 @@ static int vmd_pci_write(struct pci_bus *bus, unsigned int devfn, int reg,
>  		ret = -EINVAL;
>  		break;
>  	}
> -	spin_unlock_irqrestore(&vmd->cfg_lock, flags);
> +	raw_spin_unlock_irqrestore(&vmd->cfg_lock, flags);
>  	return ret;
>  }
>  
> @@ -1009,7 +1009,7 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  	if (features & VMD_FEAT_OFFSET_FIRST_VECTOR)
>  		vmd->first_vec = 1;
>  
> -	spin_lock_init(&vmd->cfg_lock);
> +	raw_spin_lock_init(&vmd->cfg_lock);
>  	pci_set_drvdata(dev, vmd);
>  	err = vmd_enable_domain(vmd, features);
>  	if (err)
> -- 
> 2.47.2
> 

  parent reply	other threads:[~2025-02-20 22:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-18  8:08 [PATCH v4] PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t Sebastian Andrzej Siewior
2025-02-20 14:51 ` Krzysztof Wilczyński
2025-02-20 22:59 ` Bjorn Helgaas [this message]
2025-02-21  1:17   ` Krzysztof Wilczyński

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250220225948.GA318342@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=bigeasy@linutronix.de \
    --cc=jonathan.derrick@linux.dev \
    --cc=kbusch@kernel.org \
    --cc=kw@linux.com \
    --cc=lgoncalv@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rt-devel@lists.linux.dev \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=nirmal.patel@linux.intel.com \
    --cc=robh@kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=ryotkkr98@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox