From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D3BC11F03DC; Fri, 21 Feb 2025 22:46:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1740178014; cv=none; b=OxmS3o+jLgxIFtlyuJIb4aj6riogq3NVNZbAZnYEftuincOmOb2poDOdPSoyK5Ri03QVfqtBoxobUzmIg2e3J3t3t9BDV/74PRCcgE8hC88tkaSdnHwAmoSf/GihgKqzZGdsKUWgNWoixsqViLLeKvbUl0nvAVapyQqs2H50ol4= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1740178014; c=relaxed/simple; bh=Bj5XeMMlWNoOQqinEQeMbQ7s90ZmJ+tHoedMx1SjyTw=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=Plljk4nttbn5WBDBPa4JqYK3MoRWlvdEa0H++oMfPxchSZ2zrP043miQJDRF+F1NTMwTXis/U1YA9I2OEvczAGBg5MS0SwU4TwUHZrJofwdVjpD0v5qoxHSmm58S9j2wKBjAFT0oSxtmQbjSDqwlYb3/1hXbVOJaxp8+5M8HMzM= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=PGkQXt1/; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="PGkQXt1/" Received: by smtp.kernel.org (Postfix) with ESMTPSA id 28C00C4CED6; Fri, 21 Feb 2025 22:46:53 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1740178013; bh=Bj5XeMMlWNoOQqinEQeMbQ7s90ZmJ+tHoedMx1SjyTw=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=PGkQXt1/qiDU9PqRG/31BKqsYquB3kRz/AgzXjg0qHJf4pf6V+4nenrvojOZp1+N6 Ku2CohG2BCz/UqFF3eGk+B4Sxm4/1EIUECT94Ns6zb+ony1CY3viqGwiN6nRK+Ft2a MkA8l7mUu27JpcFb3f+lunbDBRCQZNpBXpG5QFN+SZLOvkPyDKGmIY/Zk69d6QO8Fe 9S2F3CLRQKP3N0G60tztoim059YpcJxNzFW+qDsG7xxYKHjCxppp23eSctNs1tua2G AjQumYwweVBfcSLz/zv/mjfZZEfBUVullfyOQ/TC19hIr3jskScFzdxiiGnzyKGVmQ ZH5vuhtG0A+xA== Date: Fri, 21 Feb 2025 16:46:51 -0600 From: Rob Herring To: Peter Chen Cc: krzk+dt@kernel.org, conor+dt@kernel.org, catalin.marinas@arm.com, will@kernel.org, arnd@arndb.de, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, cix-kernel-upstream@cixtech.com, "Fugang . duan" Subject: Re: [PATCH 6/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support Message-ID: <20250221224651.GA195444-robh@kernel.org> References: <20250220084020.628704-1-peter.chen@cixtech.com> <20250220084020.628704-7-peter.chen@cixtech.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20250220084020.628704-7-peter.chen@cixtech.com> On Thu, Feb 20, 2025 at 04:40:20PM +0800, Peter Chen wrote: > CIX SKY1 SoC is high performance Armv9 SoC designed by Cixtech, > and Orion O6 is open source motherboard launched by Radxa. > See below for detail: > https://docs.radxa.com/en/orion/o6/getting-started/introduction > > In this commit, it only adds limited components for running initramfs > at Orion O6. > > Acked-by: Fugang.duan > Signed-off-by: Peter Chen > --- > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/cix/Makefile | 2 + > arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 21 ++ > arch/arm64/boot/dts/cix/sky1.dtsi | 264 ++++++++++++++++++++++ > 4 files changed, 288 insertions(+) > create mode 100644 arch/arm64/boot/dts/cix/Makefile > create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts > create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi > > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index 79b73a21ddc2..8e7ccd0027bd 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -13,6 +13,7 @@ subdir-y += bitmain > subdir-y += blaize > subdir-y += broadcom > subdir-y += cavium > +subdir-y += cix > subdir-y += exynos > subdir-y += freescale > subdir-y += hisilicon > diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile > new file mode 100644 > index 000000000000..ed3713982012 > --- /dev/null > +++ b/arch/arm64/boot/dts/cix/Makefile > @@ -0,0 +1,2 @@ > +# SPDX-License-Identifier: GPL-2.0 > +dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb > diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts > new file mode 100644 > index 000000000000..dbee1616076d > --- /dev/null > +++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts > @@ -0,0 +1,21 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright 2025 Cix Technology Group Co., Ltd. > + * > + */ > + > +/dts-v1/; > + > +#include "sky1.dtsi" > +/ { > + model = "Radxa Orion O6"; > + compatible = "radxa,orion-o6"; > + > + chosen { > + stdout-path = &uart2; > + }; > +}; > + > +&uart2 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi > new file mode 100644 > index 000000000000..d98735f782e0 > --- /dev/null > +++ b/arch/arm64/boot/dts/cix/sky1.dtsi > @@ -0,0 +1,264 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright 2025 Cix Technology Group Co., Ltd. > + * > + */ > + > +#include > + > +/ { > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + serial2 = &uart2; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&CPU0>; > + }; > + core1 { > + cpu = <&CPU1>; > + }; > + core2 { > + cpu = <&CPU2>; > + }; > + core3 { > + cpu = <&CPU3>; > + }; > + core4 { > + cpu = <&CPU4>; > + }; > + core5 { > + cpu = <&CPU5>; > + }; > + core6 { > + cpu = <&CPU6>; > + }; > + core7 { > + cpu = <&CPU7>; > + }; > + core8 { > + cpu = <&CPU8>; > + }; > + core9 { > + cpu = <&CPU9>; > + }; > + core10 { > + cpu = <&CPU10>; > + }; > + core11 { > + cpu = <&CPU11>; > + }; > + }; > + }; > + > + CPU0: cpu0@0 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x0>; > + device_type = "cpu"; > + capacity-dmips-mhz = <403>; > + }; > + > + CPU1: cpu1@100 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x100>; > + device_type = "cpu"; > + capacity-dmips-mhz = <403>; > + }; > + > + CPU2: cpu2@200 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x200>; > + device_type = "cpu"; > + capacity-dmips-mhz = <403>; > + }; > + > + CPU3: cpu3@300 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x300>; > + device_type = "cpu"; > + capacity-dmips-mhz = <403>; > + }; > + > + CPU4: cpu4@400 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x400>; > + device_type = "cpu"; > + capacity-dmips-mhz = <1024>; > + }; > + > + CPU5: cpu5@500 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x500>; > + device_type = "cpu"; > + capacity-dmips-mhz = <1024>; > + }; > + > + CPU6: cpu6@600 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x600>; > + device_type = "cpu"; > + capacity-dmips-mhz = <1024>; > + }; > + > + CPU7: cpu7@700 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x700>; > + device_type = "cpu"; > + capacity-dmips-mhz = <1024>; > + }; > + > + CPU8: cpu8@800 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x800>; > + device_type = "cpu"; > + capacity-dmips-mhz = <1024>; > + }; > + > + CPU9: cpu9@900 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0x900>; > + device_type = "cpu"; > + capacity-dmips-mhz = <1024>; > + }; > + > + CPU10: cpu10@a00 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0xa00>; > + device_type = "cpu"; > + capacity-dmips-mhz = <1024>; > + }; > + > + CPU11: cpu11@b00 { > + compatible = "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0 0xb00>; > + device_type = "cpu"; > + capacity-dmips-mhz = <1024>; > + }; > + }; > + > + arch_timer: timer { > + compatible = "arm,armv8-timer"; > + interrupts = , > + , > + , > + ; > + clock-frequency = <1000000000>; > + interrupt-parent = <&gic>; > + arm,no-tick-in-suspend; > + }; > + > + memory@80000000 { > + #address-cells = <2>; > + #size-cells = <2>; > + device_type = "memory"; > + reg = <0x00000000 0x80000000 0x1 0x00000000>; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + pmu: pmu { > + compatible = "arm,armv8-pmuv3"; Also needs the CPU model specific compatible string. > + interrupts = ; > + interrupt-parent = <&gic>; > + status = "okay"; okay is the default, don't need status. > + }; > + > + pmu_spe: pmu_spe { > + compatible = "arm,statistical-profiling-extension-v1"; > + interrupts = ; > + interrupt-parent = <&gic>; > + status = "okay"; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + linux,cma { > + compatible = "shared-dma-pool"; > + reusable; > + size = <0x0 0x28000000>; > + linux,cma-default; > + }; > + > + }; > + > + sky1_fixed_clocks: fixed-clocks { Drop this container node. > + uartclk: uartclk { clock-100000000 for the node name. > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <100000000>; > + clock-output-names = "uartclk"; > + }; > + > + uart_apb_pclk: uart_apb_pclk { Similar here. > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <200000000>; > + clock-output-names = "apb_pclk"; > + }; > + }; > + > + soc@0 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + dma-ranges; > + > + uart2: uart@040d0000 { serial@... > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0x0 0x040d0000 0x0 0x1000>; > + interrupts = ; > + clock-names = "uartclk", "apb_pclk"; > + clocks = <&uartclk>, <&uart_apb_pclk>; > + status = "disabled"; > + }; > + > + gic: interrupt-controller@0e001000 { > + compatible = "arm,gic-v3"; > + #address-cells = <2>; > + #interrupt-cells = <3>; > + #size-cells = <2>; > + ranges; > + interrupt-controller; > + #redistributor-regions = <1>; > + reg = <0x0 0x0e010000 0 0x10000>, /* GICD */ > + <0x0 0x0e090000 0 0x300000>; /* GICR * 12 */ > + redistributor-stride = <0x40000>; > + interrupts = ; > + interrupt-parent = <&gic>; > + > + its_pcie: its@e050000 { msi-controller@... > + compatible = "arm,gic-v3-its"; > + msi-controller; > + reg = <0x0 0x0e050000 0x0 0x30000>; > + }; > + }; > + }; > +}; > -- > 2.25.1 >