[PATCH v4] mips: dts: ralink: mt7628a: update system controller node and its consumers

[Sergio Paracuellos <sergio.paracuellos@gmail.com>]

Current MT7628A device tree file system controller node is wrong since it is
not matching bindings. Hence, update it to match current bindings updating
it also to use new introduced clock constants.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
Hi Thomas,

This is the missing patch to be applied in the series [0] because of some
build errors.

Changes in v4:
- update syntax in mail file from /include/ to #include.
- Fix build errors in 'usb-phy' node.

Thanks a lot.

Best regards,
    Sergio Paracuellos

[0]: https://lore.kernel.org/linux-mips/CAMhs-H-8N766PMZMwmV8B3e=65pPZHA4ntnRWDMoqR-U_xULfA@mail.gmail.com/T/#mab23157e03609456bb59d3b5dfc71fe16359a419

 .../ralink/gardena_smart_gateway_mt7688.dts   |  2 +-
 arch/mips/boot/dts/ralink/mt7628a.dtsi        | 40 ++++++++++++-------
 arch/mips/boot/dts/ralink/omega2p.dts         |  2 +-
 3 files changed, 27 insertions(+), 17 deletions(-)

diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
index 18107ca0a06b..7743d014631a 100644
--- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -5,7 +5,7 @@
 
 /dts-v1/;
 
-/include/ "mt7628a.dtsi"
+#include "mt7628a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
index 45a15e005cc4..0212700c4fb4 100644
--- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
 
 / {
 	#address-cells = <1>;
@@ -16,11 +17,6 @@ cpu@0 {
 		};
 	};
 
-	resetc: reset-controller {
-		compatible = "ralink,rt2880-reset";
-		#reset-cells = <1>;
-	};
-
 	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -36,9 +32,11 @@ palmbus@10000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc: system-controller@0 {
-			compatible = "ralink,mt7620a-sysc", "syscon";
+		sysc: syscon@0 {
+			compatible = "ralink,mt7628-sysc", "syscon";
 			reg = <0x0 0x60>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		pinmux: pinmux@60 {
@@ -138,7 +136,7 @@ watchdog: watchdog@100 {
 			compatible = "mediatek,mt7621-wdt";
 			reg = <0x100 0x30>;
 
-			resets = <&resetc 8>;
+			resets = <&sysc 8>;
 			reset-names = "wdt";
 
 			interrupt-parent = <&intc>;
@@ -154,7 +152,7 @@ intc: interrupt-controller@200 {
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			resets = <&resetc 9>;
+			resets = <&sysc 9>;
 			reset-names = "intc";
 
 			interrupt-parent = <&cpuintc>;
@@ -190,7 +188,9 @@ spi: spi@b00 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_spi_spi>;
 
-			resets = <&resetc 18>;
+			clocks = <&sysc MT76X8_CLK_SPI1>;
+
+			resets = <&sysc 18>;
 			reset-names = "spi";
 
 			#address-cells = <1>;
@@ -206,7 +206,9 @@ i2c: i2c@900 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_i2c_i2c>;
 
-			resets = <&resetc 16>;
+			clocks = <&sysc MT76X8_CLK_I2C>;
+
+			resets = <&sysc 16>;
 			reset-names = "i2c";
 
 			#address-cells = <1>;
@@ -222,7 +224,9 @@ uart0: uartlite@c00 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart0_uart>;
 
-			resets = <&resetc 12>;
+			clocks = <&sysc MT76X8_CLK_UART0>;
+
+			resets = <&sysc 12>;
 			reset-names = "uart0";
 
 			interrupt-parent = <&intc>;
@@ -238,7 +242,9 @@ uart1: uart1@d00 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart1_uart>;
 
-			resets = <&resetc 19>;
+			clocks = <&sysc MT76X8_CLK_UART1>;
+
+			resets = <&sysc 19>;
 			reset-names = "uart1";
 
 			interrupt-parent = <&intc>;
@@ -254,7 +260,9 @@ uart2: uart2@e00 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart2_uart>;
 
-			resets = <&resetc 20>;
+			clocks = <&sysc MT76X8_CLK_UART2>;
+
+			resets = <&sysc 20>;
 			reset-names = "uart2";
 
 			interrupt-parent = <&intc>;
@@ -271,7 +279,7 @@ usb_phy: usb-phy@10120000 {
 		#phy-cells = <0>;
 
 		ralink,sysctl = <&sysc>;
-		resets = <&resetc 22 &resetc 25>;
+		resets = <&sysc 22 &sysc 25>;
 		reset-names = "host", "device";
 	};
 
@@ -290,6 +298,8 @@ wmac: wmac@10300000 {
 		compatible = "mediatek,mt7628-wmac";
 		reg = <0x10300000 0x100000>;
 
+		clocks = <&sysc MT76X8_CLK_WMAC>;
+
 		interrupt-parent = <&cpuintc>;
 		interrupts = <6>;
 
diff --git a/arch/mips/boot/dts/ralink/omega2p.dts b/arch/mips/boot/dts/ralink/omega2p.dts
index 5884fd48f59a..51a40ab6df2b 100644
--- a/arch/mips/boot/dts/ralink/omega2p.dts
+++ b/arch/mips/boot/dts/ralink/omega2p.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "mt7628a.dtsi"
+#include "mt7628a.dtsi"
 
 / {
 	compatible = "onion,omega2+", "ralink,mt7688a-soc", "ralink,mt7628a-soc";
-- 
2.25.1