Re: [PATCH v10 12/13] drm/atomic-helper: Re-order bridge chain pre-enable and post-disable

Sverdlin, Alexander
2025-03-25T19:12:40Z

On Wed, 2025-02-26 at 21:27 +0530, Aradhya Bhatia wrote:
> Move the bridge pre_enable call before crtc enable, and the bridge
> post_disable call after the crtc disable.
>
> The sequence of enable after this patch will look like:
>
> bridge[n]_pre_enable
> ...
> bridge[1]_pre_enable
>
> crtc_enable
> encoder_enable
>
> bridge[1]_enable
> ...
> bridge[n]_enable
>
> And, the disable sequence for the display pipeline will look like:
>
> bridge[n]_disable
> ...
> bridge[1]_disable
>
> encoder_disable
> crtc_disable
>
> bridge[1]_post_disable
> ...
> bridge[n]_post_disable
>
> The definition of bridge pre_enable hook says that,
> "The display pipe (i.e. clocks and timing signals) feeding this bridge
> will not yet be running when this callback is called".
>
> Since CRTC is also a source feeding the bridge, it should not be enabled
> before the bridges in the pipeline are pre_enabled. Fix that by
> re-ordering the sequence of bridge pre_enable and bridge post_disable.
>
> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
> Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>

Tested with AM62 OLDI series [1] on AM625 with single channel AUO 800x480
LVDS panel. No issues with the patch!

Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>

[1] Link: https://lore.kernel.org/all/20250226181300.756610-1-aradhya.bhatia@linux.dev/

> ---
>  drivers/gpu/drm/drm_atomic_helper.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)

--
Alexander Sverdlin
Siemens AG