Re: [PATCH v3 1/6] media: dt-bindings: mt9m114: Add onnn,slew-rate DT-binding

[Rob Herring <robh@kernel.org>]

On Wed, Mar 05, 2025 at 11:14:48AM +0100, Mathis Foerst wrote:
> The MT9M114 supports the different slew rates (0 to 7) on the output pads.
> At the moment, this is hardcoded to 7 (the fastest rate).
> The user might want to change this values due to EMC requirements.
> 
> Add the 'onnn,slew-rate' property to the MT9M114 DT-bindings for selecting
> the desired slew rate.
> 
> Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
> ---
>  .../devicetree/bindings/media/i2c/onnn,mt9m114.yaml      | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> index f6b87892068a..c184bc04b743 100644
> --- a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> @@ -70,6 +70,15 @@ properties:
>            - bus-type
>            - link-frequencies
>  
> +  onnn,slew-rate:

Just 'slew-rate' which is already defined in the pinctrl binding.

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Slew rate ot the output pads DOUT[7:0], LINE_VALID, FRAME_VALID and
> +      PIXCLK. Higher values imply steeper voltage-flanks on the pads.
> +    minimum: 0
> +    maximum: 7
> +    default: 7
> +
>  required:
>    - compatible
>    - reg
> -- 
> 2.34.1
>