[PATCH v7 2/8] dmaengine: qcom: bam_dma: extend the driver's device match data

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In preparation for supporting the pipe locking feature flag, extend the
amount of information we can carry in device match data: create a
separate structure and make the register information one of its fields.
This way, in subsequent patches, it will be just a matter of adding a
new field to the device data.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/dma/qcom/bam_dma.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 2cf060174795..8861245314b1 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -111,6 +111,10 @@ struct reg_offset_data {
 	unsigned int pipe_mult, evnt_mult, ee_mult;
 };
 
+struct bam_device_data {
+	const struct reg_offset_data *reg_info;
+};
+
 static const struct reg_offset_data bam_v1_3_reg_info[] = {
 	[BAM_CTRL]		= { 0x0F80, 0x00, 0x00, 0x00 },
 	[BAM_REVISION]		= { 0x0F84, 0x00, 0x00, 0x00 },
@@ -140,6 +144,10 @@ static const struct reg_offset_data bam_v1_3_reg_info[] = {
 	[BAM_P_FIFO_SIZES]	= { 0x1020, 0x00, 0x40, 0x00 },
 };
 
+static const struct bam_device_data bam_v1_3_data = {
+	.reg_info = bam_v1_3_reg_info,
+};
+
 static const struct reg_offset_data bam_v1_4_reg_info[] = {
 	[BAM_CTRL]		= { 0x0000, 0x00, 0x00, 0x00 },
 	[BAM_REVISION]		= { 0x0004, 0x00, 0x00, 0x00 },
@@ -169,6 +177,10 @@ static const struct reg_offset_data bam_v1_4_reg_info[] = {
 	[BAM_P_FIFO_SIZES]	= { 0x1820, 0x00, 0x1000, 0x00 },
 };
 
+static const struct bam_device_data bam_v1_4_data = {
+	.reg_info = bam_v1_4_reg_info,
+};
+
 static const struct reg_offset_data bam_v1_7_reg_info[] = {
 	[BAM_CTRL]		= { 0x00000, 0x00, 0x00, 0x00 },
 	[BAM_REVISION]		= { 0x01000, 0x00, 0x00, 0x00 },
@@ -198,6 +210,10 @@ static const struct reg_offset_data bam_v1_7_reg_info[] = {
 	[BAM_P_FIFO_SIZES]	= { 0x13820, 0x00, 0x1000, 0x00 },
 };
 
+static const struct bam_device_data bam_v1_7_data = {
+	.reg_info = bam_v1_7_reg_info,
+};
+
 /* BAM CTRL */
 #define BAM_SW_RST			BIT(0)
 #define BAM_EN				BIT(1)
@@ -391,7 +407,7 @@ struct bam_device {
 	bool powered_remotely;
 	u32 active_channels;
 
-	const struct reg_offset_data *layout;
+	const struct bam_device_data *dev_data;
 
 	struct clk *bamclk;
 	int irq;
@@ -409,7 +425,7 @@ struct bam_device {
 static inline void __iomem *bam_addr(struct bam_device *bdev, u32 pipe,
 		enum bam_reg reg)
 {
-	const struct reg_offset_data r = bdev->layout[reg];
+	const struct reg_offset_data r = bdev->dev_data->reg_info[reg];
 
 	return bdev->regs + r.base_offset +
 		r.pipe_mult * pipe +
@@ -1225,9 +1241,9 @@ static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan,
 }
 
 static const struct of_device_id bam_of_match[] = {
-	{ .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_reg_info },
-	{ .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_reg_info },
-	{ .compatible = "qcom,bam-v1.7.0", .data = &bam_v1_7_reg_info },
+	{ .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_data },
+	{ .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_data },
+	{ .compatible = "qcom,bam-v1.7.0", .data = &bam_v1_7_data },
 	{}
 };
 
@@ -1251,7 +1267,7 @@ static int bam_dma_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	bdev->layout = match->data;
+	bdev->dev_data = match->data;
 
 	bdev->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(bdev->regs))

-- 
2.45.2