public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan+linaro@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Dennis Gilmore <dgilmore@redhat.com>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH] arm64: dts: qcom: x1e78100-t14s: enable SDX62 modem
Date: Thu, 27 Mar 2025 09:14:27 +0100	[thread overview]
Message-ID: <20250327081427.19693-1-johan+linaro@kernel.org> (raw)

Enable PCIe5 and the SDX62 modem present on some T14s.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---

I don't have a modem in my T14s, but this is based on the work I did to
enable the modem on the CRD reference design and the T14s schematics.

I'm hopping Dennis will be able to help out with testing.

Note that we may possibly need a new entry for SDX62 in the MHI driver
device id table (mhi_pci_id_table) as well. The output of 'lspci -n'
will tell.

Johan


 .../qcom/x1e78100-lenovo-thinkpad-t14s.dtsi   | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index 962fb050c55c..8b3f715bfc0b 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -310,6 +310,22 @@ vph_pwr: regulator-vph-pwr {
 		regulator-boot-on;
 	};
 
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN_RCM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
 	sound {
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-LENOVO-Thinkpad-T14s";
@@ -1028,6 +1044,25 @@ &pcie4_phy {
 	status = "okay";
 };
 
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -1309,6 +1344,29 @@ wake-n-pins {
 		};
 	};
 
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie6a_default: pcie6a-default-state {
 		clkreq-n-pins {
 			pins = "gpio153";
@@ -1367,6 +1425,13 @@ wcd_default: wcd-reset-n-active-state {
 		bias-disable;
 		output-low;
 	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
 };
 
 &usb_1_ss0_hsphy {
-- 
2.48.1


             reply	other threads:[~2025-03-27  8:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-27  8:14 Johan Hovold [this message]
2025-03-27 14:04 ` [PATCH] arm64: dts: qcom: x1e78100-t14s: enable SDX62 modem Dmitry Baryshkov
2025-03-28  9:29 ` Abel Vesa
2025-03-29 12:06   ` Konrad Dybcio
2025-03-29 20:30     ` Abel Vesa
     [not found] ` <CAJesf3M-LSS3PqGKBSzM+4SEYgRmqrVmv-kvJLYUZqqU_Vjjuw@mail.gmail.com>
2025-03-28 17:02   ` Dennis Gilmore
2025-05-17  5:57 ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250327081427.19693-1-johan+linaro@kernel.org \
    --to=johan+linaro@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dgilmore@redhat.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox